TPS56837
- 4.5V to 28V input voltage range
- 0.6V to 13V output voltage range
- Supports 8A continuous output current
- Integrated 20.4mΩ and 9.5mΩ MOSFETs
- 0.6V ±1% reference voltage at 25°C
- 45uA low quiescent current of TPS56837
- D-CAP3™ control mode for fast transient response
- TPS56837 with Eco-mode (auto-skip mode) for high light-load efficiency
- TPS56838 with forced continuous conduction mode (FCCM)
- TPS56836 with Out-of-Audio™ (OOA) mode
- 500kHz, 800kHz, and 1200kHz selectable switching frequencies by mode selection
- Adjustable cycle-by-cycle over current limit for low-side MOSFETs by mode selection
- Adjustable soft-start time with default 1.8ms
- Built-in output discharge function
- Power-good indicator to monitor output voltage
- Supports up to 98% duty operation
- Non-latched protections for UV, OV, OT, and UVLO
- –40°C to +150°C operating junction temperature
- Small 10-pin 3.0mm × 3.0mm HotRod™ QFN Package
-
Create a customer design using the TPS5683x with the WEBENCH Power Designer
- Pin-to-pin compatible with 6A TPS56637 and 8A TPS56837H
The TPS5683x is a high-efficiency, easy-to-use, synchronous buck converter with a wide input voltage range of 4.5V to 28V. The device supports up to 8A continuous output current at output voltages between 0.6V and 13V.
The TPS5683x uses D-CAP3 control mode to provide fast transient response, good line and load regulation, no requirement for external compensation, and supports low equivalent series resistance (ESR) output capacitors like MLCC.
The TPS56837 operates at Eco-mode to attain high efficiency at light load. The TPS56838 operates in forced continuous conduction mode which maintains lower output ripple during all load conditions. The TPS56836 operates in Out-of-Audio mode to avoid audible noise.
The TPS5683x has three selectable switching frequencies, 500kHz, 800kHz, and 1200kHz, and selectable current limit through MODE pin configuration. The TPS5683x has adjustable soft-start time by connecting the SS capacitor and with default 1.8ms with the SS pin floating.
The TPS5683x provides complete non-latched OV (overvoltage), UV (undervoltage), OC (overcurrent), OT (overtemperature) and UVLO (undervoltage lockout) protections combined with power-good indicator and output discharge function features.
The TPS5683x is available in a 10-pin, 3.0mm × 3.0mm, HotRod QFN package, and the junction temperature is specified from –40°C to 150°C.
您可能會感興趣的類似產品
引腳對引腳的功能與所比較的產品相同
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS5683x 4.5V to 28V Input, 8A Synchronous Buck Converter datasheet (Rev. B) | PDF | HTML | 2024年 1月 17日 |
| Application note | Understanding Output Voltage Ripple in DCM Operation of D-CAP Buck Converters | PDF | HTML | 2023年 12月 18日 | |
| Application note | Understanding Soft Start of TPS56837 | PDF | HTML | 2023年 12月 8日 | |
| Application note | Large Duty Cycle Operation of D-CAP3 Converters | PDF | HTML | 2023年 8月 31日 | |
| EVM User's guide | TPS56837 Buck Converter Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2023年 8月 16日 | |
| Certificate | TPS56837EVM EU RoHS Declaration of Conformity (DoC) | 2022年 12月 13日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS56837EVM — TPS56837 評估模組 4.5-V 至 28-V 輸入、8-A 同步降壓轉換器
TPS56837 是 8 A 同步降壓轉換器，運作範圍從 4.5 V 至 28 V 輸入電壓 (VIN)，其輸出電壓範圍從 0.6 V 至 13 V。專屬 D-CAP3™ 模式可減少外部零組件數量，簡化設計，針對電源、尺寸與效率進行電源設計最佳化。本裝置採用D-CAP3™ 模式控制，其提供無外部補償零組件與準確回饋電壓的快速瞬態回應。控制拓撲可在高負載條件下的 CCM 操作模式，和在較輕負載條件下 DCM 操作之間，提供無縫轉換。Eco-mode™ 讓 TPS56837 在低負載時維持高效率。
| 封裝 | 引腳 | 下載 |
|---|---|---|
| VQFN-HR (RPA) | 10 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點