首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

TPS61290

現行

具有旁路模式和 I²C 介面的 5.5V、11A 同步升壓轉換器

立即訂購
產品規格表

TPS61290

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 11 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 11 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
DSBGA (YBG) 16 2.486929 mm² (1.577 mm × 1.577 mm)
  • Wide VIN range from 1.8V to 5.5V
    • Start-up input voltage: 2.2V
  • Programmable average input current limit (3.5A to 11A) through I2C
  • Programmable output voltage (2.35V to 5.5V) through I2C.
    • For TPS61290, default 3.4V
    • For TPS612901, if VSEL = L, default 5V; if VSEL = H, default 5.25V
  • < 150mV undershoot at VIN = 2.7V, VOUT = 3.4V, IOUT = 0A → 3A (0.2A/µs slew rate)
  • Integrated bypass MOSFET (8mΩ), high-side MOSFET (8mΩ), low-side MOSFET (10mΩ)
  • Auto bypass mode when VIN > VOUT
  • Auto PFM operation or Forced PWM selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and over current protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package
  • Wide VIN range from 1.8V to 5.5V
    • Start-up input voltage: 2.2V
  • Programmable average input current limit (3.5A to 11A) through I2C
  • Programmable output voltage (2.35V to 5.5V) through I2C.
    • For TPS61290, default 3.4V
    • For TPS612901, if VSEL = L, default 5V; if VSEL = H, default 5.25V
  • < 150mV undershoot at VIN = 2.7V, VOUT = 3.4V, IOUT = 0A → 3A (0.2A/µs slew rate)
  • Integrated bypass MOSFET (8mΩ), high-side MOSFET (8mΩ), low-side MOSFET (10mΩ)
  • Auto bypass mode when VIN > VOUT
  • Auto PFM operation or Forced PWM selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and over current protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package

The TPS61290x provides a power supply design for products powered by a nickel-rich, silicon anode, Li-ion, or LiFePO4 battery. The voltage range is optimized for single-cell portable applications like in smart-phones or POS terminal.

Used as a high-power pre-regulator, the device extends the battery run-time and overcomes input current and voltage limitations of the powered system. With a wide input voltage range of 1.8V to 5.5V. Program the output voltage by I2C up to 5.5V. The default output voltage of TPS61290 is 3.4V. The default output voltage of TPS612901 is 5V (VSEL = Low) and 5.25V (VSEL = High).

During operation, when the battery is in a good state of charge, the TPS61290x works in bypass mode, connecting the battery to the power supply system through the bypass FET. If the battery gets to a lower state of charge and the voltage becomes lower than the desired minimum system voltage, the device seamlessly transits into boost mode to use the full battery capacity.

The TPS61290x offers a very small design size with a 16-ball YBG package.

The TPS61290x provides a power supply design for products powered by a nickel-rich, silicon anode, Li-ion, or LiFePO4 battery. The voltage range is optimized for single-cell portable applications like in smart-phones or POS terminal.

Used as a high-power pre-regulator, the device extends the battery run-time and overcomes input current and voltage limitations of the powered system. With a wide input voltage range of 1.8V to 5.5V. Program the output voltage by I2C up to 5.5V. The default output voltage of TPS61290 is 3.4V. The default output voltage of TPS612901 is 5V (VSEL = Low) and 5.25V (VSEL = High).

During operation, when the battery is in a good state of charge, the TPS61290x works in bypass mode, connecting the battery to the power supply system through the bypass FET. If the battery gets to a lower state of charge and the voltage becomes lower than the desired minimum system voltage, the device seamlessly transits into boost mode to use the full battery capacity.

The TPS61290x offers a very small design size with a 16-ball YBG package.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS61290x 5.5V, 11A, Synchronous Boost Converter With Bypass Mode, I2 C Interface, and Fast Transient Response datasheet PDF | HTML 2026/6/15
EVM User's guide TPS61290 Boost Converter With Bypass Mode Evaluation Module PDF | HTML 2026/6/15

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS61290EVM — TPS61290 評估模組

TPS61290EVM 旨在示範 TPS61290x 裝置的特性和功能，其為一具旁路模式和 I2C 介面的高性能、高效率同步升壓轉換器。TPS61290EVM 的原廠預設設定允許在 1.8V 至 5.2V 的輸入電壓範圍內運作。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS61290 PSpice Transient Model

SLVMF47.ZIP (96 KB) - PSpice 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YBG) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片