首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)
最新

TPS61377

現行

具有可編程尖峰電流限制的 23-VIN、25-VOUT 6-A 同步升壓轉換器

立即訂購
產品規格表

TPS61377

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Iout (max) (A) 4.5 Vin (min) (V) 2.9 Vin (max) (V) 23 Switching frequency (min) (kHz) 650 Switching frequency (max) (kHz) 1200 Features Adjustable current limit, Enable, Light Load Efficiency, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 4.5 Vout (max) (V) 25 Iq (typ) (A) 0.00008
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Boost Type Converter Iout (max) (A) 4.5 Vin (min) (V) 2.9 Vin (max) (V) 23 Switching frequency (min) (kHz) 650 Switching frequency (max) (kHz) 1200 Features Adjustable current limit, Enable, Light Load Efficiency, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 4.5 Vout (max) (V) 25 Iq (typ) (A) 0.00008
VQFN-HR (RYH) 13 5 mm² 2.5 x 2
  • Wide input voltage and output voltage range
    • Input voltage range: 2.9 V to 23 V
    • Output voltage range: 4.5 V to 25 V

  • Programmable peak current limit from 1.5 A to 6 A

  • Switching frequency
    • TPS61377: 650 kHz
    • TPS613771: 1.2 MHz
  • High efficiency and power capability
    • 6 A peak switching current limit
    • Low-side FET: 50 mΩ, High-side FET: 40 mΩ
    • Up to 95.3% efficiency at V IN = 9 V, V OUT = 16 V, and I OUT = 2.0 A
    • Up to 96.0% efficiency at V IN = 12 V, V OUT = 24 V, and I OUT = 1.5 A
  • Extend the system operating time
    • Typical 70 µA quiescent current
    • Maximum 1.25 µA shutdown current
    • Selectable auto PFM and forced PWM mode
  • Safety and robust operation features
    • Output overvoltage protection
    • Cycle-by-cycle overcurrent protection
    • Thermal shutdown
  • Precise EN/UVLO threshold
  • External loop compensation
  • 2.5-mm × 2.0-mm HotRod™ Lite VQFN package
  • Wide input voltage and output voltage range
    • Input voltage range: 2.9 V to 23 V
    • Output voltage range: 4.5 V to 25 V

  • Programmable peak current limit from 1.5 A to 6 A

  • Switching frequency
    • TPS61377: 650 kHz
    • TPS613771: 1.2 MHz
  • High efficiency and power capability
    • 6 A peak switching current limit
    • Low-side FET: 50 mΩ, High-side FET: 40 mΩ
    • Up to 95.3% efficiency at V IN = 9 V, V OUT = 16 V, and I OUT = 2.0 A
    • Up to 96.0% efficiency at V IN = 12 V, V OUT = 24 V, and I OUT = 1.5 A
  • Extend the system operating time
    • Typical 70 µA quiescent current
    • Maximum 1.25 µA shutdown current
    • Selectable auto PFM and forced PWM mode
  • Safety and robust operation features
    • Output overvoltage protection
    • Cycle-by-cycle overcurrent protection
    • Thermal shutdown
  • Precise EN/UVLO threshold
  • External loop compensation
  • 2.5-mm × 2.0-mm HotRod™ Lite VQFN package

The TPS61377 is a high-voltage synchronous boost converter with a 50-mΩ low-side power switch and a 40-mΩ high-side rectifier switch to provide a high efficiency and small size solution. The TPS61377 has a wide input voltage range of 2.9 V to 23 V and the output voltage covers up to 25 V with 6-A switching current capability.

The TPS61377 uses an adaptive constant off-time peak current control topology to regulate the output voltage. Under moderate to heavy load condition, the TPS61377 operates in pulse width modulation (PWM) mode. At light load, the device has two operating modes that can be selected via the MODE pin. One is pulse frequency modulation (PFM) mode to improve light-load efficiency, and the other is forced PWM mode to avoid audible noise and other application problems caused by low switching frequency.

The TPS61377 implements a soft-start function and a programmable peak switching current limit function. The TPS61377 also provides output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.

The TPS61377 offers a very small solution size with a 2.5-mm × 2.0-mm HotRod™ Lite VQFN package.

The TPS61377 is a high-voltage synchronous boost converter with a 50-mΩ low-side power switch and a 40-mΩ high-side rectifier switch to provide a high efficiency and small size solution. The TPS61377 has a wide input voltage range of 2.9 V to 23 V and the output voltage covers up to 25 V with 6-A switching current capability.

The TPS61377 uses an adaptive constant off-time peak current control topology to regulate the output voltage. Under moderate to heavy load condition, the TPS61377 operates in pulse width modulation (PWM) mode. At light load, the device has two operating modes that can be selected via the MODE pin. One is pulse frequency modulation (PFM) mode to improve light-load efficiency, and the other is forced PWM mode to avoid audible noise and other application problems caused by low switching frequency.

The TPS61377 implements a soft-start function and a programmable peak switching current limit function. The TPS61377 also provides output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.

The TPS61377 offers a very small solution size with a 2.5-mm × 2.0-mm HotRod™ Lite VQFN package.
open-in-new 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS61377 23-VIN, 25-VOUT, 6-A, Synchronous Boost Converterwith Programmable Peak Current Limit datasheet PDF | HTML 2022年 11月 29日
Application note Analysis of Using Boost Converter to Generate the Negative and Positive Voltage Rails PDF | HTML 2024年 3月 20日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS61377EVM — 適用於 23-VIN、25-VOUT 6-A 同步升壓轉換器的 TPS61377 評估模組

TPS61377 是整合 25-V 6-A 開關的高電壓同步升壓轉換器。此評估模組設計為具有 9 V 至 16 V 輸入電壓，適合 24-V 輸出電壓應用。
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS61377 PSpice Transient Model

SLVME19.ZIP (614 KB) - PSpice Model
下載
計算工具

TPS61377X-CALC-TOOL — TPS61377 and TPS613771 calculation tool

This calculation tool is for boost converter TPS61377 and TPS613771
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
TPS61377 — 具有可編程尖峰電流限制的 23-VIN、25-VOUT 6-A 同步升壓轉換器
下載
封裝 引腳 下載
VQFN-HR (RYH) 13 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片