TPS62353
- 88% Efficiency at 3-MHz Operation
- 800-mA Output Current at VI = 2.7 V
- 3-MHz Fixed Frequency Operation
- Best in Class Load and Line Transient
- Complete 1-mm Component Profile Solution
- ±2% PWM DC Voltage Accuracy
- 35-ns Minimum On-Time
- Efficiency Optimized Power-Save Mode (Light PFM)
- Transient Optimized Power-Save Mode (Fast PFM)
- 28-µA Typical Quiescent Current
- I2C Compatible Interface up to 3.4 Mbps
- Pin-Selectable Output Voltage
- Synchronizable On the Fly to External Clock Signal
- Available in a 10-Pin QFN (3 × 3 mm) and 12-Pin NanoFree™ (CSP) Packaging
- APPLICATIONS
- SmartReflex™ Compliant Power Supply
- Split Supply DSPs and µP Solutions
OMAP™, XSCALE™ - Cell Phones, Smart-Phones
- PDAs, Pocket PCs
- Digital Cameras
- Micro DC-DC Converter Modules
NanoFree, SmartReflex, OMAP, PowerPAD Is a trademark of Texas Instruments.
XSCALE is a trademark of Intel Corporation.
I2C is a trademark of Philips Corporation.
The TPS6235x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6235x supports up to 800-mA load current and allows the use of small, low cost inductors and capacitors.
The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I2C interface down to 0.6 V, the device supports low-voltage DSPs and processors core power supplies in smart-phones, PDAs, and handheld computers.
The TPS6235x operates at 3-MHz fixed switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 2 µA.
The serial interface is compatible with Fast/Standard and High-Speed mode I2C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5 mV, for reprogramming the mode of operation (Light PFM, Fast PFM or Forced PWM) or disable/enabling the output voltage.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | 800-mA 3-MHz Synchronous Step-Down Converter With I2C(TM) Compatible Interface datasheet (Rev. E) | 2008/4/15 | |||
| 類比設計期刊 | Methods of output-voltage adjustment for DC/DC converters | 2019/6/14 | ||||
| 應用說明 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018/12/11 | ||||
| 類比設計期刊 | Understanding 100% mode in low-power DC/DC converters | 2018/6/22 | ||||
| 應用說明 | Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) | 2017/11/29 | ||||
| 類比設計期刊 | Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold | 2017/10/24 | ||||
| 類比設計期刊 | Testing tips for applying external power to supply outputs without an input voltage | 2016/10/24 | ||||
| 應用說明 | Basic Calculation of a Buck Converter's Power Stage (Rev. B) | PDF | HTML | 2015/8/17 | |||
| 類比設計期刊 | Five steps to a great PCB layout for a step-down converter | 2015/1/29 | ||||
| 應用說明 | Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) | 2012/1/13 | ||||
| 類比設計期刊 | IQ: What it is, what it isn’t, and how to use it | 2011/6/17 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YZG) | 12 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。