TPS62421

現行

採用 3x3mm QFN 小型封裝的 2.25MHz 600mA/1000mA 雙路降壓轉換器

立即訂購

產品規格表

document-pdfAcrobat TPS6242x 2.25-MHz 600-mA and 1000-mA Dual Step-Down Converter in Small 3-mm × 3-mm VSON Package datasheet (Rev. D) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但針腳輸出與所比較的裝置不同。

TPS62442

現行

採用 QFN 封裝的 2.75-V 至 6-V、雙 2-A 或 3-A 和 1-A 降壓轉換器 Smaller solution size with higher output voltage range 0.6 V to 5.5 V

TPS62421

現行

產品規格表

立即訂購

產品詳細資料

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.6

Vin (max) (V)

6

Vin (min) (V)

2.5

Vout (max) (V)

1.8

Vout (min) (V)

1.2

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000032

Duty cycle (max) (%)

100

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.6

Vin (max) (V)

6

Vin (min) (V)

2.5

Vout (max) (V)

1.8

Vout (min) (V)

1.2

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000032

Duty cycle (max) (%)

100

VSON (DRC)

10

9 mm² (3 mm × 3 mm)

High Efficiency up to 95%
V_IN Range from 2.5 V to 6 V
2.25-MHz Fixed Frequency Operation
Output Current 600 mA and 1000 mA
Adjustable Output Voltage from 0.6 V to V_IN
Pin Selectable Output Voltage Supports Simple
Dynamic VoltageScaling
Optional EasyScale One-Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power-Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32-µA Quiescent Current for both
Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin VSON (3 mm × 3 mm)

High Efficiency up to 95%
V_IN Range from 2.5 V to 6 V
2.25-MHz Fixed Frequency Operation
Output Current 600 mA and 1000 mA
Adjustable Output Voltage from 0.6 V to V_IN
Pin Selectable Output Voltage Supports Simple
Dynamic VoltageScaling
Optional EasyScale One-Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power-Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32-µA Quiescent Current for both
Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin VSON (3 mm × 3 mm)

The TPS6242x device is a synchronous dual step-down DC–DC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3-V or 5-V voltage rail.

With an input voltage range of 2.5 V to 6 V, the TPS6242x is ideal for battery-powered portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low power DSP and processors.

The TPS6242x operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixed-frequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6242x operates over a free-air temperature range of –40°C to 85°C. It is available in a 10-pin leadless package (3 mm × 3 mm VSON)

The TPS6242x device is a synchronous dual step-down DC–DC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3-V or 5-V voltage rail.

With an input voltage range of 2.5 V to 6 V, the TPS6242x is ideal for battery-powered portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low power DSP and processors.

The TPS6242x operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixed-frequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6242x operates over a free-air temperature range of –40°C to 85°C. It is available in a 10-pin leadless package (3 mm × 3 mm VSON)

filter

尋找其它 DC/DC 轉換器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 16

重要文件	類型	標題	格式選項	日期
*	資料表	TPS6242x 2.25-MHz 600-mA and 1000-mA Dual Step-Down Converter in Small 3-mm × 3-mm VSON Package datasheet (Rev. D)	PDF \| HTML	2015/7/31
	應用說明	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	2023/12/6
	類比設計期刊	Methods of output-voltage adjustment for DC/DC converters		2019/6/14
	應用說明	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		2018/12/11
	類比設計期刊	Understanding 100% mode in low-power DC/DC converters		2018/6/22
	應用說明	Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B)		2017/11/29
	類比設計期刊	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		2017/10/24
	類比設計期刊	Testing tips for applying external power to supply outputs without an input voltage		2016/10/24
	應用說明	Basic Calculation of a Buck Converter's Power Stage (Rev. B)	PDF \| HTML	2015/8/17
	類比設計期刊	Five steps to a great PCB layout for a step-down converter		2015/1/29
	應用說明	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		2012/1/13
	類比設計期刊	IQ: What it is, what it isn’t, and how to use it		2011/6/17
	更多文件說明	TPS62401_NanoEVM_ Schematic		2007/2/13
	更多文件說明	TPS62401_NanoEVM_OV		2007/1/29
	更多文件說明	BQ24070_NanoEVM_OV		2007/1/29
	應用說明	Output Voltage Selection for the TPS62400 Family of Buck Converters		2006/9/20