首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)

TPS628503

現行

採用 SOT-583 封裝的 2.7-V 至 6-V、3-A、可調整頻率降壓轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Forced PWM, Frequency synchronization, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable EMI features Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 4000 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 17 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Forced PWM, Frequency synchronization, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable EMI features Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 4000 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 17 Duty cycle (max) (%) 100 Type Converter
SOT-5X3 (DRL) 8 3.36 mm² 2.1 x 1.6
  • Functional Safety-Capable
  • Input voltage range: 2.7V to 6V
  • Output voltage from 0.6V to 5.5V
  • 1% feedback voltage accuracy (full temperature range)
  • TJ = –40°C to +150°C
  • Family of 1A, 2A (continuous), and 3A (peak) devices
  • Adjustable switching frequency and sync of 1.8MHz to 4MHz
  • Forced PWM or PWM and PFM operation
  • Quiescent current 17µA (typical)
  • Precise ENABLE input allows:
    • User-defined undervoltage lockout
    • Exact sequencing
  • 100% duty cycle mode
  • Active output discharge
  • Power-good output with window comparator
  • For device options with adjustable soft start, see the TPS628511
  • Functional Safety-Capable
  • Input voltage range: 2.7V to 6V
  • Output voltage from 0.6V to 5.5V
  • 1% feedback voltage accuracy (full temperature range)
  • TJ = –40°C to +150°C
  • Family of 1A, 2A (continuous), and 3A (peak) devices
  • Adjustable switching frequency and sync of 1.8MHz to 4MHz
  • Forced PWM or PWM and PFM operation
  • Quiescent current 17µA (typical)
  • Precise ENABLE input allows:
    • User-defined undervoltage lockout
    • Exact sequencing
  • 100% duty cycle mode
  • Active output discharge
  • Power-good output with window comparator
  • For device options with adjustable soft start, see the TPS628511

The TPS62850x is a family of pin-to-pin 1A, 2A (continuous), and 3A (peak) high efficiency, easy-to-use synchronous step-down DC/DC converters. The devices are based on a peak current mode control topology. Low resistive switches allow up to 2A continuous output current and 3A peak current. The switching frequency is externally adjustable from 1.8MHz to 4MHz and can also be synchronized to an external clock in the same frequency range. In PWM and PFM mode, the TPS62850x automatically enters power save mode at light loads to maintain high efficiency across the whole load range. The TPS62850x provides a 1% output voltage accuracy in PWM mode, which helps design a power supply with high output voltage accuracy, fulfilling tight supply voltage requirements of digital processors and FPGA.

The TPS62850x is available in an 8-pin 1.60mm × 2.10mm SOT583 package.

The TPS62850x is a family of pin-to-pin 1A, 2A (continuous), and 3A (peak) high efficiency, easy-to-use synchronous step-down DC/DC converters. The devices are based on a peak current mode control topology. Low resistive switches allow up to 2A continuous output current and 3A peak current. The switching frequency is externally adjustable from 1.8MHz to 4MHz and can also be synchronized to an external clock in the same frequency range. In PWM and PFM mode, the TPS62850x automatically enters power save mode at light loads to maintain high efficiency across the whole load range. The TPS62850x provides a 1% output voltage accuracy in PWM mode, which helps design a power supply with high output voltage accuracy, fulfilling tight supply voltage requirements of digital processors and FPGA.

The TPS62850x is available in an 8-pin 1.60mm × 2.10mm SOT583 package.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS628502 現行 採用 SOT583 封裝的 2.7-V 至 6-V、2-A、可調整頻率降壓轉換器 Lower current version
TPS628503-Q1 現行 採用 SOT583 封裝的 2.7-V 至 6-V、3-A 車用降壓轉換器 AEC-Q100 qualified for automotive applications, device temperature grade 1, high efficiency, peak current
功能相同,但引腳輸出與所比較的裝置不同
TPS628512 現行 採用 SOT583 封裝的 2.7-V 至 6-V、2-A、固定頻率降壓轉換器 Switching frequency is internally fixed at 2.25 MHz, with adjustable SoftStart
TPS628513 現行 採用 SOT-583 封裝的 2.7-V 至 6-V、3-A、固定頻率降壓轉換器 Version with adjustable SoftStart.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TPS62850x 2.7V to 6V, 1A / 2A / 3A, Step-Down Converter in SOT583 Package datasheet (Rev. C) PDF | HTML 2025年 6月 6日
Application note How to Measure Impedance of a Power Distribution Network of a DC-DC Converter PDF | HTML 2022年 1月 20日
Application note Loop Gain Reconstruction of a Step-Down Converter from Output Impedance PDF | HTML 2022年 1月 20日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS628502EVM-092 — 採用 SOT583 封裝的 2.7-V 至 6-V、2-A 車用降壓轉換器評估模組

TPS628502EVM-092 評估模組設計用於評估 TPS6285X-Q1 裝置。TPS6285X-Q1 裝置是一款針對小型解決方案尺寸和高效率進行最佳化的高頻同步降壓轉換器。此裝置著重在廣泛輸出電流範圍下提供高效率降壓轉換。在中到高負載下,轉換器會以 PWM 模式運作,並在低負載時自動進入省電模式運作,以在整個負載電流範圍內維持高效率。內部補償電路可實現具小型外部元件的精巧解決方案。此裝置採用 2.1-mm × 1.6-mm 的 SOT583 封裝。

使用指南: PDF
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-5X3 (DRL) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片