首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS62872-Q1

現行

車用、2.7V 至 -6V 輸入、12A 可堆疊同步降壓轉換器

產品詳細資料

Rating Automotive Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 12 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 3.35 Vout (min) (V) 0.4 Switch current limit (typ) (A) 20 Features Adaptive/Dynamic Voltage Scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO Fixed, UVLO fixed, Wettable flanks package EMI features Frequency Dithering, Low parasitic Hotrod packaging, Spread Spectrum Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00175 Duty cycle (max) (%) 75 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 12 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 3.35 Vout (min) (V) 0.4 Switch current limit (typ) (A) 20 Features Adaptive/Dynamic Voltage Scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO Fixed, UVLO fixed, Wettable flanks package EMI features Frequency Dithering, Low parasitic Hotrod packaging, Spread Spectrum Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00175 Duty cycle (max) (%) 75 TI functional safety category Functional Safety-Capable
VQFN-FCRLF (RXS) 16 9.0525 mm² (2.55 mm × 3.55 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • 2.7V to 6V input voltage range
  • 6A, 9A, 12A, and 15A family of pin-to-pin compatible device
  • Four output voltage ranges:
    • 0.4V to 0.71875V in 1.25mV steps
    • 0.4V to 1.0375V in 2.5mV steps
    • 0.4V to 1.675V in 5mV steps
    • 0.8V to 3.35V in 10mV steps
  • Output voltage accuracy ±1%
  • 7mΩ and 4.5mΩ internal power MOSFETs
  • Adjustable external compensation
  • Resistor-selectable start-up output voltage
  • Resistor-selectable switching frequency
  • Power-save or forced-PWM operation
  • I2C-compatible interface up to 1MHz
  • Differential remote sensing
  • Optional stacked operation for increased output current capability
  • Thermal warning and thermal shutdown
  • Precise enable input
  • Active output discharge
  • Optional spread-spectrum clocking
  • Power-good output with a window comparator
  • Available in 2.55mm × 3.55mm × 1mm VQFN package with wettable flanks
  • –40°C to 150°C junction temperature, TJ
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • 2.7V to 6V input voltage range
  • 6A, 9A, 12A, and 15A family of pin-to-pin compatible device
  • Four output voltage ranges:
    • 0.4V to 0.71875V in 1.25mV steps
    • 0.4V to 1.0375V in 2.5mV steps
    • 0.4V to 1.675V in 5mV steps
    • 0.8V to 3.35V in 10mV steps
  • Output voltage accuracy ±1%
  • 7mΩ and 4.5mΩ internal power MOSFETs
  • Adjustable external compensation
  • Resistor-selectable start-up output voltage
  • Resistor-selectable switching frequency
  • Power-save or forced-PWM operation
  • I2C-compatible interface up to 1MHz
  • Differential remote sensing
  • Optional stacked operation for increased output current capability
  • Thermal warning and thermal shutdown
  • Precise enable input
  • Active output discharge
  • Optional spread-spectrum clocking
  • Power-good output with a window comparator
  • Available in 2.55mm × 3.55mm × 1mm VQFN package with wettable flanks
  • –40°C to 150°C junction temperature, TJ

The TPS6287x-Q1 is a family of pin-to-pin 6A, 9A, 12A, and 15A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x-Q1 family implements an enhanced DCS-control scheme that supports fast transients with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5MHz, 2.25MHz, 2.5MHz, or 3.0MHz, or synchronized to an external clock in the same frequency range.

The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.

The TPS6287x-Q1 is a family of pin-to-pin 6A, 9A, 12A, and 15A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x-Q1 family implements an enhanced DCS-control scheme that supports fast transients with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5MHz, 2.25MHz, 2.5MHz, or 3.0MHz, or synchronized to an external clock in the same frequency range.

The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS62873-Q1 現行 車用 2.7-V 至 6-V 輸入、15-A、堆疊式同步降壓轉換器 Higher current option, provides flexiblity to increase current based on application need without changing the layout.

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 23
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS6287x -Q1 2.7V to 6V Input, 6A, 9A, 12A, 15A, Stackable, Synchronous Automotive Step-Down Converters With Fast Transient Response datasheet (Rev. D) PDF | HTML 2025/1/31
Product overview Mobileye EyeQ™6H – Discrete Power Tree PDF | HTML 2024/11/7
類比設計期刊 固定頻率 DCS-Control:具有時脈同步的快速瞬態回應 PDF | HTML Download English Version PDF | HTML 2024/2/13
應用說明 QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/6
應用說明 Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 2023/11/29
應用說明 Using the Filters with the DC/DC Step-Down Converter PDF | HTML 2023/2/2
應用說明 Operating TPS6287X-Q1 Devices in a Stacked Configuration PDF | HTML 2023/1/30
應用說明 Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter PDF | HTML 2022/12/22
Product overview Mobileye EyeQ6L – Semi Discrete Power Tree PDF | HTML 2022/8/5
應用說明 Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 2022/5/5
功能安全資訊 TPS6287x-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2022/5/4
應用說明 Loop Gain Reconstruction of a Step-Down Converter from Output Impedance PDF | HTML 2022/1/20
應用說明 How to Measure Impedance of a Power Distribution Network of a DC-DC Converter PDF | HTML 2022/1/20
白皮書 Enabling Higher Data Rates for Optical Modules With Small and Efficient Power PDF | HTML 2021/3/22
白皮書 Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
類比設計期刊 Methods of output-voltage adjustment for DC/DC converters 2019/6/14
類比設計期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
類比設計期刊 Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
應用說明 Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/8/17
類比設計期刊 Five steps to a great PCB layout for a step-down converter 2015/1/29
類比設計期刊 High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/7/25
應用說明 Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/1/13
應用說明 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/9/19

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62873EVM-143 — TPS62873-Q1 評估模組 2.7-V 至 6-V 輸入降壓轉換器

TPS62873EVM-143 評估模組 (EVM) 的設計目的在於評估和測試 TPS62873-Q1 降壓轉換器的運作和功能性。亦可用於評估 TPS62870-Q1、TPS62871-Q1 及 TPS62872-Q1 裝置。EVM 可將 2.7-V 至 6.0-V 輸入電壓轉換為調節的 0.75-V 輸出電壓。對於 TPS62873EVM-143,輸出電流最高可達 15 A。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TPS62873EVM-144 — TPS62873-Q1 30-A 降壓轉換器評估模組

TPS62873EVM-144 評估模組 (EVM) 是一款針對小型解決方案尺寸和高效率進行最佳化的高頻同步降壓轉換器。EVM 的設計旨在幫助使用者輕鬆評估及測試兩個 TPS62873 降壓轉換器的疊堆配置運作及功能性。其亦可用於評估此配置中的 TPS62870-Q1、TPS62871-Q1 及 TPS62872-Q1 裝置。EVM 可將 2.7-V 至 6.0-V 輸入電壓轉換為調節的 0.75-V 輸出電壓。此 EVM 的輸出電流最高可達 30-A。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

BEAGLEY-AI — 以 AM67A 為基礎的 BeagleBoard.org Foundation BeagleY® AI 單板電腦

BeagleY® AI 是開放原始碼單板電腦,旨在簡化建置智慧型人機介面 (HMI) 的流程,會在可靠的嵌入式系統中增添攝影機和高速連線功能。它具有強大的 64 位元、四核心 A53 處理器;多個搭配 C7x DSP 的強大 AI 加速器;整合式 50 GFLOP GPU,可支援多達三個並行顯示輸出;以及現代化的連線功能,包括 USB3.1、PCIe Gen 3、WiFi6 和 Bluetooth® 低耗能 5.4。 

此板相容於可擴展系統功能的多種現有附件,例如乙太網路供電 (PoE)、NVMe 儲存和 5G 連線。

Beagle Y AI 擁有具競爭力的價格和方便使用的設計,可使用 (...)

支援產品和硬體
支援產品和硬體
支援產品和硬體
模擬型號

TPS62872-Q1 PSpice Transient Model

SLVME18.ZIP (1249 KB) - PSpice 模型
支援產品和硬體
參考設計

TIPA-020000 — Mobileye EyeQ™6H 電源供應設計

此電源設計是適用於 Mobileye EyeQ™6H SoC 的離散式電源樹狀結構測試報告摘要。自動駕駛輔助系統 (ADAS) 等汽車應用採用 Mobileye EyeQ™6H 等 ADAS 網域控制器處理器。這些精密的處理器需要在極低的電壓下具有非常高的電流。這些處理器也需要非常快速的輸出電壓暫態響應,以因應處理器負載電流的步進變化。此德州儀器設計以有效率、符合成本效益的方式滿足快速暫態響應的嚴格要求。

這種離散式方法可實現負載點轉換器最佳放置,同時仍可提供具最小輸出電容的小型設計尺寸。

多通道電壓監控器用於監控所有 SoC 相關的電源軌。電源排序可透過任何外部安全 MCU 實作。

此電源設計的 (...)

支援產品和硬體
參考設計

TIPA-050022 — Mobileye EQ6L 分離式電源供應設計

此電源設計是適用於 Mobileye EyeQ6Lite® SoC 的 TI 半離散式電源樹狀結構測試報告摘要。自動駕駛輔助系統 (ADAS) 等汽車應用採用 Mobileye EyeQ6L 等 ADAS 網域控制器處理器。這些精密的處理器需要在極低的電壓下具有非常高的電流。這些處理器也需要非常快速的輸出電壓暫態響應,以因應處理器負載電流的步進變化。

此電源供應器設計以有效率、符合成本效益的方式滿足快速暫態響應的嚴格要求。下圖所示的半離散方法,結合了 PMIC 和離散式穩壓器,可將負載點轉換器放在最佳位置,同時仍提供具有最小輸出電容的小型解決方案尺寸。

PMIC (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-FCRLF (RXS) 16 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片