首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

TPS62893-Q1

現行

具有遙測功能的車用、2.8V 至 6V 輸入、50A 快速瞬態響應、可堆疊同步降壓轉換器

立即訂購
產品規格表

TPS62893-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 50 Vin (max) (V) 6 Vin (min) (V) 2.8 Vout (max) (V) 1 Vout (min) (V) 0.4 Features Adaptive/dynamic voltage scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start, Spread Spectrum Clocking (SSC), Synchronous Rectification, Telemetry, Thermal shutdown, UVLO, Wettable flanks package Control mode DCS-Control Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 50 Vin (max) (V) 6 Vin (min) (V) 2.8 Vout (max) (V) 1 Vout (min) (V) 0.4 Features Adaptive/dynamic voltage scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start, Spread Spectrum Clocking (SSC), Synchronous Rectification, Telemetry, Thermal shutdown, UVLO, Wettable flanks package Control mode DCS-Control Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
WQFN-FCRLF (VAA) 20 30 mm² 5 x 6
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C TA
    • –40°C to 150°C junction temperature range
  • Functional Safety-Capable
  • Input voltage range: 2.8V to 6V
  • ±0.5% output voltage accuracy
  • Output voltage range from 0.4V to 1.0V
  • 1.8mΩ and 0.7mΩ internal power MOSFETs
  • External compensation
  • Optional stacked operation for increased output current capability
  • Adjustable switching frequency from 833kHz to 3MHz (product preview)
  • External synchronization
  • Forced PWM or power save mode operation
  • Optimized load transient operation
  • Fixed frequency DCS-Control
  • Transient non-synchronous mode
  • Adjustable droop compensation
  • Optimized for small and low-profile inductors
  • I2C-compatible interface with up to 3.4MHz
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Input and output overvoltage protection
  • Output discharge
  • Optional spread spectrum clocking
  • Telemetry for VIN, Temp, VOUT, and IOUT
  • Interrupt output
  • Power-good output with window comparator with adjustable thresholds
  • Available in 5.0mm × 6.0mm, VQFN package
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C TA
    • –40°C to 150°C junction temperature range
  • Functional Safety-Capable
  • Input voltage range: 2.8V to 6V
  • ±0.5% output voltage accuracy
  • Output voltage range from 0.4V to 1.0V
  • 1.8mΩ and 0.7mΩ internal power MOSFETs
  • External compensation
  • Optional stacked operation for increased output current capability
  • Adjustable switching frequency from 833kHz to 3MHz (product preview)
  • External synchronization
  • Forced PWM or power save mode operation
  • Optimized load transient operation
  • Fixed frequency DCS-Control
  • Transient non-synchronous mode
  • Adjustable droop compensation
  • Optimized for small and low-profile inductors
  • I2C-compatible interface with up to 3.4MHz
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Input and output overvoltage protection
  • Output discharge
  • Optional spread spectrum clocking
  • Telemetry for VIN, Temp, VOUT, and IOUT
  • Interrupt output
  • Power-good output with window comparator with adjustable thresholds
  • Available in 5.0mm × 6.0mm, VQFN package

The TPS6289x-Q1 devices are a family of pin-to-pin 30A, 40A, and 50A synchronous step-down DC/DC converters with I2C interface and differential remote sense. Low-resistance power switches allow up to 50A continuous output current at high ambient temperatures. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices. In stacked operation, the converters frequencies are synchronized, share a common compensation signal and shift the phases to supply loads with several hundreds of amperes. The TPS6289x-Q1 family implements a fixed-frequency-DCS-Control scheme with adjustable switching frequency and adjustable loop compensation. The high switching frequency and loop bandwidth is optimized for low-profile- and small-size inductors and low output capacitance. Devices can operate in power-save mode (PSM) for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple. The I2C compatible interface offers several control, monitoring and warning features including telemetry data of input voltage, output voltage, output current, and temperature. Four SET pins can be used to program default settings before start-up.

The TPS6289x-Q1 devices are a family of pin-to-pin 30A, 40A, and 50A synchronous step-down DC/DC converters with I2C interface and differential remote sense. Low-resistance power switches allow up to 50A continuous output current at high ambient temperatures. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices. In stacked operation, the converters frequencies are synchronized, share a common compensation signal and shift the phases to supply loads with several hundreds of amperes. The TPS6289x-Q1 family implements a fixed-frequency-DCS-Control scheme with adjustable switching frequency and adjustable loop compensation. The high switching frequency and loop bandwidth is optimized for low-profile- and small-size inductors and low output capacitance. Devices can operate in power-save mode (PSM) for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple. The I2C compatible interface offers several control, monitoring and warning features including telemetry data of input voltage, output voltage, output current, and temperature. Four SET pins can be used to program default settings before start-up.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片
索取更多資訊

提供完整資料表及其他設計資源。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet TPS6289x-Q1 2.8V to 6V Input, 30A, 40A, and 50A, Automotive, Stackable Step-Down Converter With I²C Interface and Telemetry datasheet PDF | HTML 2025年 7月 18日
Functional safety information TPS6289xx-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2025年 7月 3日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62893EVM-012 — TPS62893 降壓轉換器評估模組

TPS62893EVM-012 的設計旨在幫助使用者輕鬆評估及測試 TPS62893 降壓轉換器的運作及功能。此評估模組 (EVM) 亦可用於評估此配置中的 TPS62891-Q1 和 TPS62892-Q1 裝置。EVM 可將 2.7 V 至 6.0 V 輸入電壓轉換為已調節的 0.8 V 輸出電壓。此 EVM 的輸出電流最高可達 50A。
使用指南: PDF | HTML
TI.com 無法提供
開發板

TPS62893EVM-013 — TPS62893 評估模組

TPS62893EVM-013 的設計旨在幫助使用者輕鬆評估及測試 TPS62893 降壓轉換器的運作及功能。此 EVM 亦可用於評估此配置中的 TPS62891-Q1 和 TPS62892-Q1 裝置。EVM 可將 2.7 V 至 6.0 V 輸入電壓轉換為已調節的 0.8 V 輸出電壓。此 EVM 的輸出電流最高可達 100A。
使用指南: PDF | HTML
TI.com 無法提供
設計工具

TPS6289X-Q1-DESIGN — TPS62893-Q1 design resources

TPS62893-Q1 full datasheet and design resources
支援產品和硬體

支援產品和硬體
要求
參考設計

TIPA-020007 — 適用於 AMD® Versal™ AI Edge 系列第二代的電源供應概念驗證設計

此概念驗證電源設計展示如何透過 TI 穩壓器積體電路 (IC) 為 2VE3858 裝置所需的電源軌供電。此設計方法符合 AMD® 標準，可將整合的電源供應軌數量減至最少。請參閱 AMD Power Design Manager (PDM) 工具頁面，了解所有可用的電源整合選項。對於任何應用，請使用預估功率時實作的 PDM。
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (VAA) 20 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片