TPS62932
- Configured for a wide range of applications
- 3.8-V to 30-V input voltage range
- 0.8-V to 22-V output voltage range
- Ultra-low quiescent current: 12 µA (TPS62932, TPS62933, and TPS62933P)
- Integrated 76-mΩ and 32-mΩ MOSFETs
- 0.8 V ± 1% reference voltage (25°C)
- Maximum 98% duty cycle operation
- Precision EN threshold
- 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current
- –40°C to 150°C operating junction temperature
- Numerous pin-compatible options
- TPS62932, TPS62933, and TPS62933F with the SS pin for adjustable soft-start time
- TPS62933P and TPS62933O with the PG pin for a power-good indicator
- TPS62932, TPS62933, and TPS62933P with pulse frequency modulation (PFM) for high light-load efficiency
- TPS62933F with forced continuous current modulation (FCCM)
- TPS62933O with out-of-audio (OOA) feature
- Ease of use and small solution size
- Peak current control mode with internal compensation
- 200-kHz to 2.2-MHz selectable frequency
- EMI friendly with frequency spread spectrum (TPS62932, TPS62933, TPS62933P and TPS62933O)
- Supports start-up with prebiased output
- Cycle-by-cycle OC limit for both high-side and low-side MOSFETs
- Non-latched protections for OTP, OCP, OVP, UVP, and UVLO
- 1.6-mm × 2.1-mm SOT583 package
- Create a custom design with the TPS6293x using the WEBENCH Power Designer
The TPS6293x is a high-efficiency, easy-to-use synchronous buck converter with a wide input voltage range of 3.8 V to 30 V, and supports up to 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current and 0.8-V to 22-V output voltage.
The device employs fixed-frequency peak current control mode for fast transient response and good line and load regulation. The optimized internal loop compensation eliminates external compensation components.
The TPS62932, TPS62933, and TPS62933P operate in pulse frequency modulation for high light load efficiency. The TPS62933F operates in forced continuous current modulation which maintains lower output ripple during all load conditions. The TPS62933O operates in out of audio mode to avoid audible noise.
The ULQ (ultra-low quiescent) feature is beneficial for long battery lifetime. The switching frequency can be set by the configuration of the RT pin in the range of 200 kHz to 2.2 MHz, which can optimize system efficiency, solution size, and bandwidth. The soft-start time of the TPS62932, TPS62933, and TPS62933F can be adjusted by the external capacitor at the SS pin. The TPS62932, TPS62933, TPS62933P and TPS62933O are featured with frequency spread spectrum, which helps with lowering down EMI noise.
The TPS6293x is in a small SOT583 (1.6 mm × 2.1 mm) package with 0.5-mm pin pitch, and has an optimized pinout for easy PCB layout and promotes good EMI performance.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS6293x 3.8-V to 30-V, 2-A, 3-A Synchronous Buck Converters in a SOT583 Package datasheet (Rev. D) | PDF | HTML | 2022年 8月 8日 |
| EVM User's guide | TPS62932 2-A Converter Evaulation Module User's Guide | PDF | HTML | 2022年 8月 9日 | |
| Certificate | TPS62932EVM EU RoHS Declaration of Conformity (DoC) | 2022年 3月 15日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS62932EVM — 適用於 2-A 同步降壓轉換器的 TPS62932 評估模組
TPS62932 是具備 3.8-V 至 30-V 的廣泛輸入電壓範圍的高效率、易用的同步降壓轉換器，最適合由 5-V、12-V、19-V 和 24-V 電源匯流排軌供電的系統。支援最高 2-A 連續輸出電流、0.8-V 至 22-V 輸出電壓，以及最大 98% 工作週期運作。本裝置採用固定頻率峰值電流控制模式，以獲得快速瞬態回應及良好線路與負載穩壓。最佳化的內部迴路補償可消除在廣泛輸出電壓及運作頻率範圍中的外部補償零組件。脈衝頻率調變 (PFM) 模式可發揮最大輕載效率。超低靜態 (ULQ™) 延長電池壽命功能非常有利於在低功耗下的長時間運作。切換頻率可透過在 200-kHz 至 (...)
TPS62933EVM — 適用於 3.8-V 至 30-V、3-A、200-kHz 至 2.2-MHz 同步降壓轉換器的 TPS62933 評估模組
TIDA-010950 — 具有功率調節和霍爾效應位置感測功能的阻尼器與 EEV 控制器參考設計
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOT-5X3 (DRL) | 8 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點