首頁 電源管理 DC/DC 開關穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 開關穩壓器
DC/DC 轉換器
最新

TPS62A02A-Q1

現行

採用 SOT563 封裝的 2.5V 至 5.5V、2A 車用降壓轉換器

立即訂購
產品規格表

TPS62A02A-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO Fixed Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000028 Duty cycle (max) (%) 100
Rating Automotive Topology Buck Iout (max) (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO Fixed Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000028 Duty cycle (max) (%) 100
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • 2.5V to 5.5V input voltage range
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C TA
  • 0.6V to VIN adjustable output voltage range
  • 42mΩ and 27.5mΩ low RDSON switches
  • < 28µA quiescent current
  • 1.5% feedback accuracy (–40°C to 125°C)
  • 100% mode operation
  • 2.2MHz switching frequency
  • Power save mode or FPWM parts available
  • Power-good output pin
  • Short-circuit protection (HICCUP)
  • Internal soft start-up
  • Active output discharge
  • Thermal shutdown protection
  • Pin-to-pin compatible with the TPS62A01-Q1
  • CIN of 4.7µF, COUT of 22µF and 1µH inductor
  • 2.5V to 5.5V input voltage range
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C TA
  • 0.6V to VIN adjustable output voltage range
  • 42mΩ and 27.5mΩ low RDSON switches
  • < 28µA quiescent current
  • 1.5% feedback accuracy (–40°C to 125°C)
  • 100% mode operation
  • 2.2MHz switching frequency
  • Power save mode or FPWM parts available
  • Power-good output pin
  • Short-circuit protection (HICCUP)
  • Internal soft start-up
  • Active output discharge
  • Thermal shutdown protection
  • Pin-to-pin compatible with the TPS62A01-Q1
  • CIN of 4.7µF, COUT of 22µF and 1µH inductor

The TPS62A02-Q1 and TPS62A02A-Q1 are synchronous, step-down, buck DC-DC converters optimized for high efficiency and compact design size. The devices integrate switches capable of delivering an output current up to 2A. At medium to heavy loads, the devices operate in pulse width modulation (PWM) mode with 2.2MHz switching frequency. At light load, the TPS62A02-Q1 automatically enters a power save mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is minimal as well. The TPS62A02A-Q1 variant of this device operates in forced PWM across the whole load current range and maintains a constant switching frequency.

The TPS62A02x-Q1 devices provide an adjustable output voltage through an external resistor divider. An internal soft-start circuit limits the inrush current during start-up and a power good signal indicates when the output voltage is at target. Overcurrent protection and thermal shutdown protect application and device. The devices are available in an SOT-563 package.

The TPS62A02-Q1 and TPS62A02A-Q1 are synchronous, step-down, buck DC-DC converters optimized for high efficiency and compact design size. The devices integrate switches capable of delivering an output current up to 2A. At medium to heavy loads, the devices operate in pulse width modulation (PWM) mode with 2.2MHz switching frequency. At light load, the TPS62A02-Q1 automatically enters a power save mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is minimal as well. The TPS62A02A-Q1 variant of this device operates in forced PWM across the whole load current range and maintains a constant switching frequency.

The TPS62A02x-Q1 devices provide an adjustable output voltage through an external resistor divider. An internal soft-start circuit limits the inrush current during start-up and a power good signal indicates when the output voltage is at target. Overcurrent protection and thermal shutdown protect application and device. The devices are available in an SOT-563 package.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet TPS62A02x-Q1, 2A, High-Efficiency, Automotive, Synchronous Buck Converters in an SOT-563 Package datasheet PDF | HTML 2025年 4月 28日
Functional safety information TPS62A02-Q1 and TPS62A02A-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2025年 4月 22日
Certificate TPS62A02AQEVM-140 EU Declaration of Conformity (DoC) 2025年 4月 22日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62A02AQEVM-140 — TPS62A02A-Q1 評估模組

TPS62A02A-Q1 評估模組 (EVM) 可評估車用同步降壓式降壓 DC/DC 轉換器；該轉換器是專為高效率與精巧設計尺寸所設計。TPS62A02A-Q1 可提供高達 2A 的輸出電流。此變體可在整個負載電流範圍內以強制 PWM 模式 (FPWM) 運作。此 EVM 提供 1.6mm × 1.6mm 的 SOT563 封裝。

使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-5X3 (DRL) 6 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片