TPS63031
- Input voltage range: 1.8 V to 5.5 V
- Fixed and adjustable output voltage options from 1.2 V to 5.5 V
- Up to 96% efficiency
- 800-mA Output current at 3.3 V in step-down mode (VIN = 3.6 V to 5.5 V)
- Up to 500-mA output current at 3.3 V in boost mode (VIN > 2.4 V)
- Automatic transition between step-down and boost mode
- Device quiescent current less than 50 µA
- Power-save mode for improved efficiency at low-output power
- Forced fixed frequency operation and synchronization possible
- Load disconnect during shutdown
- Overtemperature protection
- Available in a small 2.5-mm × 2.5-mm 10-pin VSON package (QFN)
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed-frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low-load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5-mm × 2.5-mm (DSK).
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS6303x High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches datasheet (Rev. D) | PDF | HTML | 2020/3/30 | ||
| 應用說明 | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023/12/6 | |||
| 應用說明 | Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) | PDF | HTML | 2021/6/9 | |||
| 應用說明 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018/12/11 | ||||
| 應用說明 | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018/9/19 | ||||
| 應用說明 | Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B) | 2018/7/9 | ||||
| 選擇指南 | Power Management Guide 2018 (Rev. R) | 2018/6/25 | ||||
| 白皮書 | Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) | 2012/3/28 | ||||
| 類比設計期刊 | IQ: What it is, what it isn’t, and how to use it | 2011/6/17 | ||||
| 應用說明 | Minimizing Ringing at the Switch Node of a Boost Converter | 2006/9/15 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
SLVC808 — Battery Lifetime Estimator
TIDM-AIRQUALITYSENSOR — MSP430FR4133 微控制器空氣品質感測器參考設計
在此參考設計中，使用 PM2.5 懸浮微粒水平建立並實作簡易的空氣品質監測器。此設計採用 MSP430FR4133 微控制器 (MCU) 與 Sharp™ DN7C3CA006 PM2.5 感測器。MSP430™ MCU 的這種超低功耗中心設計與 DN7C3CA006 的整合式類比協同工作，可採集空氣樣本並計算空氣品質指標 (AQI)。使用 8 個字元，14 段 LCD 從週期性 PM2.5 取樣中計算並顯示 AQI。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DSK) | 10 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。