首頁 電源管理 多通道 IC (PMIC)
首頁
電源管理
多通道 IC (PMIC)

TPS65086

現行

適用 2S 和 3S 鋰電池供電設備或非電池供電設備的可配置多軌 PMIC

立即訂購
產品規格表

TPS65086

現行
產品規格表 立即訂購

產品詳細資料

Processor supplier Xilinx Processor name Artix-7, Zynq Ultrascale+ Product type Processor and FPGA Regulated outputs (#) 13 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21, 25 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500
Processor supplier Xilinx Processor name Artix-7, Zynq Ultrascale+ Product type Processor and FPGA Regulated outputs (#) 13 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21, 25 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500
VQFN (RSK) 64 64 mm² (8 mm × 8 mm)
  • Wide VIN Range From 5.6V to 21 V
  • Three Variable-Output Voltage Synchronous
    Step-Down Controllers With DCAP2™ Topology
    • Scalable Output Current Using External FETs
      With Selectable Current Limit
    • I2C DVS Control From 0.41 V to 1.67 V in
      10-mV Steps or 1 V to 3.575 V in 25-mV Steps
  • Three Variable-Output Voltage Synchronous Step-Down
    Converters With DCS-Control Topology
    • VIN Range From 4.5 V to 5.5 V
    • Up to 3 A of Output Current
    • I2C DVS Control From 0.41 V to 1.67 V
      in 10-mV Steps or 0.425 V to 3.575 V in 25-mV
      Steps
  • Three LDO Regulators With Adjustable Output Voltage
    • LDOA1: I2C-Selectable Output Voltage
      From 1.35 V to 3.3 V for up to 200 mA of Output
      Current
    • LDOA2 and LDOA3: I2C-Selectable Output
      Voltage From 0.7 V to 1.5 V for up to 600 mA of
      Output Current
  • VTT LDO for DDR Memory Termination
  • Three Load Switches With Slew Rate Control
    • Up to 300 mA of Output Current With Voltage
      Drop Less Than 1.5% of Nominal Input Voltage
    • RDSON < 96 mΩ at Input Voltage
      of 1.8 V
  • 5-V Fixed-Output Voltage LDO (LDO5)
    • Power Supply for Gate Drivers of SMPS and
      for LDOA1
    • Automatic Switch to External 5-V Buck for Higher
      Efficiency
  • Built-in Flexibility and Configurability by Factory
    OTP Programming
    • Six GPI Pins Configurable to Enable (CTL1 to CTL6)
      or Sleep Mode Entry (CTL3 and CTL6) of Any Selected
      Rails
    • Four GPO Pins Configurable to Power Good of Any
      Selected Rails
    • Open-Drain Interrupt Output Pin
  • I2C Interface Supports:
    • Standard Mode (100 kHz)
    • Fast Mode (400 kHz)
    • Fast Mode Plus (1 MHz)
  • Wide VIN Range From 5.6V to 21 V
  • Three Variable-Output Voltage Synchronous
    Step-Down Controllers With DCAP2™ Topology
    • Scalable Output Current Using External FETs
      With Selectable Current Limit
    • I2C DVS Control From 0.41 V to 1.67 V in
      10-mV Steps or 1 V to 3.575 V in 25-mV Steps
  • Three Variable-Output Voltage Synchronous Step-Down
    Converters With DCS-Control Topology
    • VIN Range From 4.5 V to 5.5 V
    • Up to 3 A of Output Current
    • I2C DVS Control From 0.41 V to 1.67 V
      in 10-mV Steps or 0.425 V to 3.575 V in 25-mV
      Steps
  • Three LDO Regulators With Adjustable Output Voltage
    • LDOA1: I2C-Selectable Output Voltage
      From 1.35 V to 3.3 V for up to 200 mA of Output
      Current
    • LDOA2 and LDOA3: I2C-Selectable Output
      Voltage From 0.7 V to 1.5 V for up to 600 mA of
      Output Current
  • VTT LDO for DDR Memory Termination
  • Three Load Switches With Slew Rate Control
    • Up to 300 mA of Output Current With Voltage
      Drop Less Than 1.5% of Nominal Input Voltage
    • RDSON < 96 mΩ at Input Voltage
      of 1.8 V
  • 5-V Fixed-Output Voltage LDO (LDO5)
    • Power Supply for Gate Drivers of SMPS and
      for LDOA1
    • Automatic Switch to External 5-V Buck for Higher
      Efficiency
  • Built-in Flexibility and Configurability by Factory
    OTP Programming
    • Six GPI Pins Configurable to Enable (CTL1 to CTL6)
      or Sleep Mode Entry (CTL3 and CTL6) of Any Selected
      Rails
    • Four GPO Pins Configurable to Power Good of Any
      Selected Rails
    • Open-Drain Interrupt Output Pin
  • I2C Interface Supports:
    • Standard Mode (100 kHz)
    • Fast Mode (400 kHz)
    • Fast Mode Plus (1 MHz)

The TPS650860 device is a single-chip power-management IC designed for multicore processors, FPGAs, and other System-on-Chips (SoCs). The TPS650860 offers an input range of 5.6 V to 21 V, enabling a wide range of applications. The device is well suited for NVDC and non-NVDC power architecture using 2S, 3S, or 4S Li-Ion battery packs. See the Application Section for 5-V input supplies. The D-CAP2 and DCS-Control high-frequency voltage regulators use small inductors and capacitors to achieve a small solution size. The D-CAP2 and DCS-Control topologies have excellent transient response performance, which is great for processor core and system memory rails that have fast load switching. An I2C interface allows simple control either by an embedded controller (EC) or by an SoC. The PMIC comes in an 8-mm × 8-mm, single-row VQFN package with thermal pad for good thermal dissipation and ease of board routing.

The TPS650860 device is a single-chip power-management IC designed for multicore processors, FPGAs, and other System-on-Chips (SoCs). The TPS650860 offers an input range of 5.6 V to 21 V, enabling a wide range of applications. The device is well suited for NVDC and non-NVDC power architecture using 2S, 3S, or 4S Li-Ion battery packs. See the Application Section for 5-V input supplies. The D-CAP2 and DCS-Control high-frequency voltage regulators use small inductors and capacitors to achieve a small solution size. The D-CAP2 and DCS-Control topologies have excellent transient response performance, which is great for processor core and system memory rails that have fast load switching. An I2C interface allows simple control either by an embedded controller (EC) or by an SoC. The PMIC comes in an 8-mm × 8-mm, single-row VQFN package with thermal pad for good thermal dissipation and ease of board routing.
filter 尋找其它 多通道 IC (PMIC)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS650861 現行 具有 3 個轉換器、3 個控制器、4 個 LDO 和 3 個負載開關的使用者可編程電源管理 IC (PMIC) User-programmable PMIC with same functionality

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS650860 Configurable Multirail PMU for Multicore Processors datasheet (Rev. A) PDF | HTML 2015/12/10
應用說明 Optimizing Resistor Dividers at a Comparator (Rev. B) PDF | HTML 2021/4/30
應用說明 How to Design Flexible Processor Power Systems Using PMICs (Rev. B) 2020/1/27
使用指南 TPS650860 PMIC User's Guide For I2C Configurable-Systems 2018/1/18
應用說明 Push-Button Circuit (Rev. B) 2017/11/1
白皮書 Simple power rail sequencing solutions for complex multi-rail systems 2016/7/6
應用說明 TPS65086x Schematic and Layout Checklist (Rev. A) 2015/12/2
使用指南 TPS65086x Design Guide 2015/11/19
Product overview TPS650860 PMIC Product Bulletin 2015/9/28
應用說明 Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/8/17
白皮書 Power management integrated buck controllers for distant point-of-load apps 2015/8/14
應用說明 Advantages of the Highly-Programmable DC/DC Controllers in the TPS65086x PMIC 2015/3/27
類比設計期刊 Controlling switch-node ringing in synchronous buck converters 2012/4/26
應用說明 Ringing Reduction Techniques for NexFET High Performance MOSFETs 2011/11/16

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS650860EVM-116 — TPS650860 評估模組

適用於 TPS65086x 系列的評估模組 (EVM)。EVM 為工程師提供了一個平台，可評估、測試及探索 TPS650860 在實際應用中的使用。處理器和系統所需的所有排序和功能都在此電路板上展示。此 EVM 還具備更改預設配置和測試獨特應用程式的功能。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
驅動程式或資料庫

TPS65086SW-LINUX — 適用於 TPS65086 的 Linux 驅動程式

The Linux driver supports the TPS65086 Power Management IC. The Linux driver supports communication through the I2C bus and interfaces with the Regulator sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • tps65086

 

Linux Source Files

(...)

支援產品和硬體
開發模組 (EVM) 的 GUI

IPG-UI — IPG-UI EVM GUI (Windows Installer)

IPG-UI GUI 可用於配置多部 PMIC 裝置，以評估這些裝置的功能和性能。  此 GUI 使用 Web 型技術建立，支援使用 USB2ANY 轉接器電路板與 EVM 硬體互動。提供 USB2ANY Explorer，允許將 USB2ANY 轉接器電路板上的韌體更新到所需的版本 (2.7.0.0 或更高版本)。

支援產品和硬體
開發模組 (EVM) 的 GUI

IPG-UI-LINUX — IPG-UI EVM GUI (Linux Installer)

IPG-UI GUI 可用於配置多部 PMIC 裝置，以評估這些裝置的功能和性能。  此 GUI 使用 Web 型技術建立，支援使用 USB2ANY 轉接器電路板與 EVM 硬體互動。提供 USB2ANY Explorer，允許將 USB2ANY 轉接器電路板上的韌體更新到所需的版本 (2.7.0.0 或更高版本)。

支援產品和硬體
開發模組 (EVM) 的 GUI

IPG-UI-OSX — IPG-UI EVM GUI (OSX Installer)

IPG-UI GUI 可用於配置多部 PMIC 裝置，以評估這些裝置的功能和性能。  此 GUI 使用 Web 型技術建立，支援使用 USB2ANY 轉接器電路板與 EVM 硬體互動。提供 USB2ANY Explorer，允許將 USB2ANY 轉接器電路板上的韌體更新到所需的版本 (2.7.0.0 或更高版本)。

支援產品和硬體
支援軟體

SWCC016 — TPS650860 Device Installers v1.0

支援產品和硬體
模擬型號

Flotherm Model for TPS65086x products

SWCM008.ZIP (0 KB) - 熱模型
支援產品和硬體
模擬型號

TPS650860 RSK 64 BXL Schematic Symbols

SWCM007.ZIP (26 KB) - IBIS 模型
支援產品和硬體
模擬型號

TPS650860 RSK IBIS Model

SWCM006.ZIP (37 KB) - IBIS 模型
支援產品和硬體
參考設計

PMP12004-HE — 為 Xilinx Zynq UltraScale+ 遠端射頻頭端 (RRH) 或回程 (BH) 供電的參考設計

此設計專為 Xilinx Zynq UltraScale+ (www.xilinx.com/power) 遠端無線電頭端 (RRH) 供電所開發，採用 TPS6508640，具備小型化與高效率雙重優勢。PMIC 透過以下方式縮小尺寸、降低成本並減少功率損耗：將多組供應軌整合至單一裝置、採用高切換頻率，並為核心供電配置獨立供應軌。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSK) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片