TPS65200
- Battery Switching Charger, WLED Driver, and
Current Shunt Monitor in a Single Package - Battery Charger
- Charges Faster Than Linear Chargers
- High-Accuracy Voltage and Current Regulation
- Input Current Regulation Accuracy: ±5%
(100 mA, 500 mA) - Charge Voltage Regulation Accuracy:
±0.5% (25°C)
±1% (0 - 125°C) - Charge Current Regulation Accuracy: ±5%
- Input Current Regulation Accuracy: ±5%
- Bad Adaptor Detection and Rejection
- Safety Limit Register for Maximum Charge
Voltage and Current Limiting - High-Efficiency Mini-USB/AC Battery Charger
for Single-Cell Li-Ion and Li-Polymer Battery
Packs - Built-In Input Current Sensing and Limiting
- Integrated Power FETs for Up to 1.25-A
Charge Rate - Programmable Charge Parameters through I2C
Interface (Up to 400 Kbps):- Input Current
- Fast-Charge/Termination Current
- Charge Voltage (3.5 V – 4.44 V)
- Safety Timer
- Termination Enable
- Synchronous Fixed-Frequency PWM
Controller Operating at 3 MHz With 0% to
99.5% Duty Cycle - Safety Timer With Reset Control
- Reverse Leakage Protection Prevents Battery
Drainage - Thermal Regulation and Protection
- Input/Output Overvoltage Protection
- Automatic Charging
- Boost Mode Operation for USB OTG
- Input Voltage Range (VSYS): 2.5 V to
4.5 V - Output Voltage for VBUS: 5 V
- Input Voltage Range (VSYS): 2.5 V to
- 35-V Open LED Protection for Up to 8 LEDs
- 200-mV Reference Voltage With ±2%
Accuracy - Built-In Soft Start for WLED Boost
- Up to 90% Efficiency
- Fixed Gain of 25 V/V
- Input Referred Offset Voltage Less Than
±40 µV Typical Enables Use of Shunt
Resistors as Low as 20 mΩ - Buffered Reference Voltage
- 36-Ball, 0.4-mm Pitch DSBGA Package
- Mobile Phones and Smart Phones
- MP3 Players
- Portable Navigation Devices
- Handheld Devices
All other trademarks are the property of their respective owners
The TPS65200 device integrates a high-efficiency, USB-friendly switched-mode charger with OTG support for single-cell Li-ion and Li-polymer batteries, D+D– detection, a 50-mA fixed-voltage LDO, a high-efficiency WLED boost converter, and high-accuracy current-shunt monitor into a single chip.
The TPS65200 comes in a tiny, 2.8-mm × 2.6-mm, 36-pin, 0.4-mm pitch die size ball grid array (DSBGA).
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS65200 Li+ Battery Charger With WLED Driver and Current Shunt Monitor datasheet (Rev. A) | PDF | HTML | 2015/9/26 | ||
| 選擇指南 | Power Management Guide 2018 (Rev. R) | 2018/6/25 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YFF) | 36 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。