封裝資訊
| 封裝 | 針腳 DSBGA (YZH) | 16 |
| 操作溫度範圍 (°C) -40 to 85 |
| 包裝數量 | 運送業者 250 | SMALL T&R |
TPS65708 的特色
- Two 400-mA Step-Down Converters
- Up to 95% Efficiency
- VIN Range for DC-DC Converters From
3.6 V to 6 V - 2.25-MHz Fixed-Frequency Operation
- Power Save Mode at Light Load Current
- Output Voltage Accuracy in PWM mode ±1.5%
- 100% Duty Cycle for Lowest Dropout
- 180° Out-of-Phase Operation
- 2 General Purpose 200-mA LDOs
- LDOs Optionally Powered From Step-Down
Converters - 7.5-mA PWM Dimmable Current Sink
- Available in a 16-Ball DSBGA (WCSP) With
0.5-mm Pitch - Device Options:
- VDCDC1 = 3.3 V
- VDCDC2 = 1.8 V
- VLDO1 = 2.8 V
- VLDO2 = 1.2 V
- ISINK(PWM=1) = 7.5 mA
- SEQUENCING : DCDC1, LDO1, DCDC2,
LDO2
- APPLICATIONS
- Monitors
- Laptops
- Handheld Equipment
All other trademarks are the property of their respective owners
TPS65708 的說明
The TPS65708 device is a power management unit targeted for embedded camera modules or other portable low-power consumer end equipment. The device contains two high-efficiency step-down converters, two low-dropout linear regulators, and a 7.5-mA current sink for driving a LED. The 2.25-MHz step-down converter enters a low-power mode at light load for maximum efficiency across the widest possible range of load currents. For low-noise applications, the devices can be forced into fixed-frequency PWM mode using the MODE pin. The device allows the use of small inductors and capacitors to achieve a small solution size. The TPS65708 device provides an output current of up to 400 mA on both DC-DC converters and up to 200 mA on each of the LDOs. The enable signal to the DC-DC converters and LDOs is generated internally by the undervoltage lockout circuit.
The TPS65708 comes in a small 16-pin wafer chip-scale package (WCSP) with 0.5-mm ball pitch.