TPS760
- 50-mA Low-Dropout Regulator
- Fixed Output Voltage Options: 5 V, 3.8 V, 3.3 V, 3.2 V, and 3 V
- Dropout Typically 120 mV at 50 mA
- Thermal Protection
- Less Than 1-uA Quiescent Current in Shutdow
- \x9640°C to 125°C Operating Junction Temperature Range
- 5-Pin SOT-23 Package
- ESD Protection Verified to 1.5 kV Human Body Model (HBM) per MIL-STD-883C
The TPS760xx is a 50 mA, low dropout (LDO) voltage regulator designed specifically for battery-powered applications. A proprietary BiCMOS fabrication process allows the TPS760xx to provide outstanding performance in all specifications critical to battery-powered operation.
The TPS760xx is available in a space-saving SOT\x9623 package and operates over a junction temperature range of \x9640°C to 125°C.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | Low-Power 50-mA Low-Dropout Linear Regulators datasheet (Rev. D) | 2001年 5月 4日 | |
| Application note | LDO Noise Demystified (Rev. B) | PDF | HTML | 2020年 8月 18日 | |
| Application note | ESR, Stability, and the LDO Regulator (Rev. A) | 2020年 1月 7日 | ||
| Application note | Fundamental Theory of PMOS LDO Voltage Regulators (Rev. A) | 2018年 8月 17日 | ||
| Application note | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017年 8月 9日 | |
| User guide | DEM-SOT23LDO Demonstration Fixture User's Guide (Rev. A) | 2005年 6月 2日 | ||
| Application note | Technical Review of Low Dropout Voltage Regulator Operation And Performance | 1999年 8月 30日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
參考設計
TIDA-00300 — 適用於通訊和類比輸入/輸出模組的隔離式電源架構參考設計
This reference design provides a means to isolate I2C or SPI communication lines. This is often required in grid infrastructure applications such as protection relays and circuit breakers where high voltages are involved. This reference design provides both power isolation and signal isolation.
參考設計
TIDA-00078 — 具有 I/Q 校正的直接降壓轉換系統
The I/Q Correction block implemented in the Field Programmable Gate Array (FPGA) of the TSW6011EVM helps users to adopt a direct down conversion receiver architecture in a wireless system. The I/Q correction block consists of a single-tap blind algorithm, which corrects the frequency-independent (...)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOT-23 (DBV) | 5 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。