TPS797

現行

具電源良好的 50-mA 超低 IQ 低壓降電壓穩壓器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
TPS745 現行 具有電源良好指示的 500mA、低 IQ、高準確度、可調整超低壓差電壓穩壓器 Alternative product offering lower noise and higher accuracy.

產品詳細資料

Output options Fixed Output Iout (max) (A) 0.05 Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 3.3 Vout (min) (V) 1.8 Fixed output options (V) 1.8, 2.85, 3, 3.3 Noise (µVrms) 600 Iq (typ) (mA) 0.001 Thermal resistance θJA (°C/W) 231 Rating Catalog Load capacitance (min) (µF) 0.47 Regulated outputs (#) 1 Features Power good Accuracy (%) 4 Dropout voltage (Vdo) (typ) (mV) 105 Operating temperature range (°C) -40 to 85
Output options Fixed Output Iout (max) (A) 0.05 Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 3.3 Vout (min) (V) 1.8 Fixed output options (V) 1.8, 2.85, 3, 3.3 Noise (µVrms) 600 Iq (typ) (mA) 0.001 Thermal resistance θJA (°C/W) 231 Rating Catalog Load capacitance (min) (µF) 0.47 Regulated outputs (#) 1 Features Power good Accuracy (%) 4 Dropout voltage (Vdo) (typ) (mV) 105 Operating temperature range (°C) -40 to 85
SOT-SC70 (DCK) 5 4.2 mm² 2 x 2.1
  • 50-mA Low-Dropout Regulator
  • Ultra-Low 1.2-µA Quiescent Current at 10 mA
  • 5-Pin SC70 (DCK) Package
  • Integrated Power Good Output
  • Stable With Any Capacitor Greater Than 0.47 µF
  • Typical Dropout Voltage of 105 mV at 10 mA (TPS79733)
  • Over-Current Limitation
  • Operating Junction Temperature Range of –40°C to 85°C
  • 50-mA Low-Dropout Regulator
  • Ultra-Low 1.2-µA Quiescent Current at 10 mA
  • 5-Pin SC70 (DCK) Package
  • Integrated Power Good Output
  • Stable With Any Capacitor Greater Than 0.47 µF
  • Typical Dropout Voltage of 105 mV at 10 mA (TPS79733)
  • Over-Current Limitation
  • Operating Junction Temperature Range of –40°C to 85°C

The TPS797xx family of low-dropout voltage regulators (LDOs) offers the benefits of low-dropout voltage and ultra-low-power operation. The device is stable with any capacitor greater than 0.47-µF. Therefore, implementations of this device require very little board space due to the miniaturized packaging and potentially small output capacitor. In addition, the family includes an integrated open drain active-high power good (PG) output. Intended for use in microcontroller-based, battery-powered applications, the TPS797xx family low dropout and ultra-low-power operation result in a significant increase in system battery operating life. The small packaging minimizes consumption of board space.

The device is enabled when the applied voltage exceeds the minimum input voltage. The usual PNP pass transistor has been replaced by a PMOS pass element. Because the PMOS pass element behaves as a low-value resistor, the dropout voltage is very low (typically, 105 mV at 10-mA of load current), and is directly proportional to the load current. The quiescent current is ultra-low (1.2-µA, typically) and is stable over the entire range of output load current (0 mA to 50 mA). When properly configured with a pullup resistor, the PG output can implement a power-on reset or low-battery indicator.

The TPS797xx family of low-dropout voltage regulators (LDOs) offers the benefits of low-dropout voltage and ultra-low-power operation. The device is stable with any capacitor greater than 0.47-µF. Therefore, implementations of this device require very little board space due to the miniaturized packaging and potentially small output capacitor. In addition, the family includes an integrated open drain active-high power good (PG) output. Intended for use in microcontroller-based, battery-powered applications, the TPS797xx family low dropout and ultra-low-power operation result in a significant increase in system battery operating life. The small packaging minimizes consumption of board space.

The device is enabled when the applied voltage exceeds the minimum input voltage. The usual PNP pass transistor has been replaced by a PMOS pass element. Because the PMOS pass element behaves as a low-value resistor, the dropout voltage is very low (typically, 105 mV at 10-mA of load current), and is directly proportional to the load current. The quiescent current is ultra-low (1.2-µA, typically) and is stable over the entire range of output load current (0 mA to 50 mA). When properly configured with a pullup resistor, the PG output can implement a power-on reset or low-battery indicator.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS797xx Ultra-Low IQ, 50-mA Low-Dropout Linear Regulators With Power Good Output in SC70 Package datasheet (Rev. J) PDF | HTML 2016年 12月 23日
White paper Understanding the Foundations of Quiescent Current in Linear Power Systems 2021年 2月 18日
Application note LDO Noise Demystified (Rev. B) PDF | HTML 2020年 8月 18日
Application note A Topical Index of TI LDO Application Notes (Rev. F) 2019年 6月 27日
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 2017年 8月 9日
EVM User's guide TPS79733EVM LDO Regulator Evaluation Module (Rev. A) 2003年 6月 2日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS79733EVM — TPS79733 評估模組

The purpose of this EVM is to facilitate evaluation of the TPS797xx family of LDO regulators. Each EVM package contains an SLVP199 test board with a TPS79733DCK low dropout linear regulator as well as supporting passive components. Also, the board's small size and side clips facilitate attaching it (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TPS79718 PSpice Transient Model

SLVMB49.ZIP (84 KB) - PSpice Model
模擬型號

TPS79718 Unencrypted PSpice Transient Model

SLVMB50.ZIP (2 KB) - PSpice Model
模擬型號

TPS797285 PSpice Transient Model

SLVMB55.ZIP (84 KB) - PSpice Model
模擬型號

TPS797285 Unencrypted PSpice Transient Model

SLVMB56.ZIP (2 KB) - PSpice Model
模擬型號

TPS79730 PSpice Transient Model

SLVMB54.ZIP (85 KB) - PSpice Model
模擬型號

TPS79730 Unencrypted PSpice Transient Model

SLVMB53.ZIP (2 KB) - PSpice Model
模擬型號

TPS79733 PSpice Transient Model

SLVMB51.ZIP (85 KB) - PSpice Model
模擬型號

TPS79733 Unencrypted PSpice Transient Model

SLVMB52.ZIP (2 KB) - PSpice Model
參考設計

DLP4500-C350REF — 採用 DLP 技術的高解析度、可攜式光源操控參考設計

This reference design, featuring the DLP® 0.45” WXGA chipset and implemented in the DLP® LightCrafter™ 4500 evaluation module (EVM), enables flexible control of high resolution, accurate patterns for industrial, medical, and scientific applications. With a free USB-based GUI and (...)
Test report: PDF
電路圖: PDF
參考設計

TIDA-00254 — 使用 DLP® 技術且適用於 3D 機器視覺應用的精確點雲產生

The 3D Machine Vision reference design employs Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) (...)
Test report: PDF
電路圖: PDF
封裝 引腳 下載
SOT-SC70 (DCK) 5 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片