TPS7A14C
- Ultra-low input voltage range: 0.7V to 2.2V
- High efficiency:
- Dropout voltage at 1A: 80mV (max)
- Excellent load transient response
- Accuracy over load, line, and temperature:
- +10mV (max) to −23mV (min)
- High PSRR:
- 60dB at 1kHz (VOUT = 0.8V, IOUT = 500mA)
- Available in fixed-output voltages:
- 0.5V to 2.0V (in 25mV steps)
- VBIAS range: 2.2V to 5.5V
- Package:
- 6-pin WCSP: 1.16mm × 0.71mm
- Active output discharge
The TPS7A14C is a small, ultra low-dropout regulator (LDO) with excellent transient response. This device sources 1A with outstanding ac performance (load and line transient responses). The input voltage range is 0.7V to 2.2V, and the output range is 0.5V to 2.0V with excellent accuracy over load, line, and temperature.
The primary power path is through the IN pin, which is connected to a power supply as low as 50mV above the output voltage. All electrical characteristics are specified for input voltages 100mV greater than the output voltage, thereby yielding high practical efficiency. This regulator supports very low input voltages by using a higher, externally supplied VBIAS rail that powers the internal circuitry of the LDO.
The TPS7A14C is equipped with an active pulldown circuit to quickly discharge the output when disabled, and provides a known start-up state.
The TPS7A14C is available in an ultra-small 0.71mm × 1.16mm, 6-bump WCSP package.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS7A14C 1A, Low VIN , Low VOUT , Fast-Settling, Low-Dropout Regulator datasheet | PDF | HTML | 2025年 9月 24日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS7A14EVM-058 — TPS7A14 評估模組適用於 1-A、低輸入及輸出電壓、超 LDO 電壓穩壓器
TPS7A14 評估模組 (EVM) 可協助設計工程師評估 TPS7A14 線性穩壓器的運作及性能,以在其本身電路應用中使用。TPS7A14EVM-058 配置包含適合各種應用的單一低雜訊、小尺寸線性穩壓器。穩壓器能以低 VIN 至 VOUT 壓降電壓為負載提供最高 1 A。爲了穩定,請使用最小降額輸出電容 1.5 µF (或更大)。隨附新增高性能負載暫態電路,以改善低壓差 (LDO) 穩壓器的量測能力。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YBK) | 6 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點