TPS7A15C

現行

400mA、低輸入及輸出電壓、快速穩定低壓差 (LDO) 穩壓器

產品詳細資料

Rating Catalog Vin (max) (V) 2.2 Vin (min) (V) 0.7 Iout (max) (A) 0.4 Output options Fixed Output Vout (max) (V) 2 Vout (min) (V) 0.5 Fixed output options (V) 0.8 Noise (µVrms) 7.2 PSRR at 100 KHz (dB) 43 Iq (typ) (mA) 0.0056 Features Enable, Output discharge Thermal resistance θJA (°C/W) 72.7, 136.7 Load capacitance (min) (µF) 1.5 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 30 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 2.2 Vin (min) (V) 0.7 Iout (max) (A) 0.4 Output options Fixed Output Vout (max) (V) 2 Vout (min) (V) 0.5 Fixed output options (V) 0.8 Noise (µVrms) 7.2 PSRR at 100 KHz (dB) 43 Iq (typ) (mA) 0.0056 Features Enable, Output discharge Thermal resistance θJA (°C/W) 72.7, 136.7 Load capacitance (min) (µF) 1.5 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 30 Operating temperature range (°C) -40 to 125
DSBGA (YCK) 6 0.71 mm² 0.71 x 1
  • Ultra-low input voltage range: 0.7V to 2.2V
  • High efficiency:
    • Dropout at 400mA: 80mV (max)
    • Specified for VIN = VOUT + 100mV
  • Excellent load transient response
  • High PSRR: 84dB at 1kHz
  • Available in fixed-output voltages:
    • 0.5V to 2.0V (in 25mV steps)
  • VBIAS range:
    • 2.2V to 5.5V
  • Package:
    • 6-pin, 1mm × 0.71mm DSBGA
  • Active output discharge
  • Ultra-low input voltage range: 0.7V to 2.2V
  • High efficiency:
    • Dropout at 400mA: 80mV (max)
    • Specified for VIN = VOUT + 100mV
  • Excellent load transient response
  • High PSRR: 84dB at 1kHz
  • Available in fixed-output voltages:
    • 0.5V to 2.0V (in 25mV steps)
  • VBIAS range:
    • 2.2V to 5.5V
  • Package:
    • 6-pin, 1mm × 0.71mm DSBGA
  • Active output discharge

The TPS7A15C is a small, low-dropout regulator (LDO) with excellent transient response. This device can source 400mA with outstanding ac performance (load and line transient responses). The input voltage range is from 0.7V to 2.2V, and the output range is from 0.5 V to 2.0V.

The primary power path is through the IN pin and can be connected to a power supply as low as 50mV above the output voltage. All electrical characteristics (including excellent output voltage tolerance, transient response, and PSRR) are specified for input voltages 100mV greater than the output voltage, thereby yielding high practical efficiency. This regulator supports very low input voltages by using a higher, externally supplied VBIAS rail that powers the internal circuitry of the LDO. For example, the supply voltage to the IN pin can be the output of a high-efficiency, DC/DC step-down regulator and the BIAS pin supply voltage can be a rechargeable battery.

This LDO is equipped with an active pulldown circuit to quickly discharge the output when disabled, and provides a known start-up state.

The TPS7A15C is available in an ultra-small 0.71mm × 1.0mm, 6-bump WCSP package.

The TPS7A15C is a small, low-dropout regulator (LDO) with excellent transient response. This device can source 400mA with outstanding ac performance (load and line transient responses). The input voltage range is from 0.7V to 2.2V, and the output range is from 0.5 V to 2.0V.

The primary power path is through the IN pin and can be connected to a power supply as low as 50mV above the output voltage. All electrical characteristics (including excellent output voltage tolerance, transient response, and PSRR) are specified for input voltages 100mV greater than the output voltage, thereby yielding high practical efficiency. This regulator supports very low input voltages by using a higher, externally supplied VBIAS rail that powers the internal circuitry of the LDO. For example, the supply voltage to the IN pin can be the output of a high-efficiency, DC/DC step-down regulator and the BIAS pin supply voltage can be a rechargeable battery.

This LDO is equipped with an active pulldown circuit to quickly discharge the output when disabled, and provides a known start-up state.

The TPS7A15C is available in an ultra-small 0.71mm × 1.0mm, 6-bump WCSP package.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 日期
* Data sheet TPS7A15C 400mA, Low VIN , Low VOUT , Fast-Settling, Ultra-Low Dropout Regulator datasheet PDF | HTML 2026年 3月 25日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7A13EVM-057 — 適用於 300-mA、低輸入及輸出電壓、超 LDO 電壓穩壓器的 TPS7A13 評估模組

TPS7A13 評估模組 (EVM) 可協助設計工程師評估 TPS7A13 線性穩壓器的運作及性能,以在其本身電路應用中使用。TPS7A13EVM-057 配置包含適合各種應用的單一低雜訊、小尺寸線性穩壓器。穩壓器能以低 VIN 至 VOUT 壓降電壓為負載提供最高 300 mA。爲了穩定,請使用最小降額輸出電容 1 µF (或更大)。隨附新增高性能負載暫態電路,以改善低壓差 (LDO) 穩壓器的量測能力。

使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YCK) 6 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片