首頁 電源管理 線性與低壓差 (LDO) 穩壓器
首頁
電源管理
線性與低壓差 (LDO) 穩壓器

TPS7B88-Q1

現行

具有快速暫態響應的車用 500mA、40V 低壓差 (LDO) 線性穩壓器

立即訂購
產品規格表

TPS7B88-Q1

現行
產品規格表 立即訂購

產品詳細資料

Output options Fixed Output Iout (max) (A) 0.5 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 3.3 Fixed output options (V) 3.3, 5 Noise (µVrms) 280 Iq (typ) (mA) 0.017 Thermal resistance θJA (°C/W) 30.0 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 2.2 Regulated outputs (#) 1 Accuracy (%) 1.15 PSRR at 100 KHz (dB) 65 Dropout voltage (Vdo) (typ) (mV) 390 Operating temperature range (°C) -40 to 150
Output options Fixed Output Iout (max) (A) 0.5 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 3.3 Fixed output options (V) 3.3, 5 Noise (µVrms) 280 Iq (typ) (mA) 0.017 Thermal resistance θJA (°C/W) 30.0 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 2.2 Regulated outputs (#) 1 Accuracy (%) 1.15 PSRR at 100 KHz (dB) 65 Dropout voltage (Vdo) (typ) (mV) 390 Operating temperature range (°C) -40 to 150
TO-252 (KVU) 3 66.726 mm² 6.6 x 10.11
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Input voltage range: 3 V to 40 V (42 V max)
  • Output voltage range: 3.3 V and 5 V (fixed)
  • Maximum output current: 500 mA
  • Output voltage accuracy: ±1.15% (max)
  • Low dropout voltage:
    • 525 mV (max) at 450 mA
  • Low quiescent current:
    • 17 µA (typ) at light loads
  • Excellent line transient response:
    • ±2% VOUT deviation during cold-crank
    • ±2% VOUT deviation (1-V/µs VIN slew rate)
  • Stable with a 2.2-µF or larger capacitor
  • Package 3-pin TO-252: (RθJA): 30°C/W
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Input voltage range: 3 V to 40 V (42 V max)
  • Output voltage range: 3.3 V and 5 V (fixed)
  • Maximum output current: 500 mA
  • Output voltage accuracy: ±1.15% (max)
  • Low dropout voltage:
    • 525 mV (max) at 450 mA
  • Low quiescent current:
    • 17 µA (typ) at light loads
  • Excellent line transient response:
    • ±2% VOUT deviation during cold-crank
    • ±2% VOUT deviation (1-V/µs VIN slew rate)
  • Stable with a 2.2-µF or larger capacitor
  • Package 3-pin TO-252: (RθJA): 30°C/W

The TPS7B88-Q1 is a low-dropout linear regulator designed to connect to the battery in automotive applications. The device has an input voltage range extending to 40 V, which allows the device to withstand transients (such as load dump) that are anticipated in automotive systems. With only a 17-µA quiescent current at light loads, the device is an optimal solution for powering always-on components such as microcontrollers (MCUs) and controller area network (CAN) transceivers in standby systems.

The device has state-of-the-art transient response that allows the output to quickly react to changes in load or line (for example, during cold-crank conditions). Additionally, the device has a novel architecture that minimizes output overshoot when recovering from dropout. During normal operation, the device has a tight DC accuracy of ±1.15% over line, load, and temperature.

The device is available in thermally conductive packaging to allow the parts to efficiently transfer heat to the circuit board.

The TPS7B88-Q1 is a low-dropout linear regulator designed to connect to the battery in automotive applications. The device has an input voltage range extending to 40 V, which allows the device to withstand transients (such as load dump) that are anticipated in automotive systems. With only a 17-µA quiescent current at light loads, the device is an optimal solution for powering always-on components such as microcontrollers (MCUs) and controller area network (CAN) transceivers in standby systems.

The device has state-of-the-art transient response that allows the output to quickly react to changes in load or line (for example, during cold-crank conditions). Additionally, the device has a novel architecture that minimizes output overshoot when recovering from dropout. During normal operation, the device has a tight DC accuracy of ±1.15% over line, load, and temperature.

The device is available in thermally conductive packaging to allow the parts to efficiently transfer heat to the circuit board.
open-in-new 尋找其它 線性與低壓差 (LDO) 穩壓器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
TPS7B86-Q1 現行 具有電源良好指示的車用 500mA、40V 超低 IQ 低壓差 (LDO) 線性穩壓器 Same performance with enable feature
TPS7B87-Q1 現行 具有電源良好指示的車用 500mA、40V 低壓差 (LDO) 穩壓器 Same performance with power good and delay features

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS7B88-Q1 500-mA, 40-V, Low-Dropout Regulator datasheet PDF | HTML 2021年 1月 11日
Functional safety information TPS7B88-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2024年 3月 20日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MLTLDO2EVM-037 — 適用於 DCY、DDA 和 KVU 封裝的通用 LDO 線性電壓穩壓器評估模組

MLTLDO2EVM-037 多重封裝低壓差 (LDO) 評估模組 (EVM) 可讓設計工程師評估多種常用線性穩壓器封裝的運作情形及性能，以利在自己的電路應用中使用。此 EVM 配置包含 DDA、3 針腳和 5 針腳 KVU，以及用於工程師焊接和評估其零件的 DCY 封裝板上配置。

使用指南: PDF
TI.com 無法提供
模擬型號

TPS7B88-Q1 PSpice Transient Model (3.3-V Output)

SBVM969.ZIP (6 KB) - PSpice Model
下載
模擬型號

TPS7B88-Q1 PSpice Transient Model (5-V Output)

SBVM968.ZIP (6 KB) - PSpice Model
下載
封裝 引腳 下載
TO-252 (KVU) 3 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片