首頁 電源管理 線性與低壓差 (LDO) 穩壓器

TPS7H1121-SEP

現行

輻射強化、2.25V 至 14V 輸入、2A 低壓差 (LDO) 穩壓器

產品詳細資料

Rating Space Vin (max) (V) 14 Vin (min) (V) 2.25 Iout (max) (A) 2 Output options Adjustable Output Vout (max) (V) 13.2 Vout (min) (V) 0.6 Fixed output options (V) 0 Noise (µVrms) 4 PSRR at 100 KHz (dB) 45 Iq (typ) (mA) 10 Features Adjustable current limit, Enable, Power good, Soft start Thermal resistance θJA (°C/W) 30.5 Load capacitance (min) (µF) 6.8 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 400 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (krad) 50
Rating Space Vin (max) (V) 14 Vin (min) (V) 2.25 Iout (max) (A) 2 Output options Adjustable Output Vout (max) (V) 13.2 Vout (min) (V) 0.6 Fixed output options (V) 0 Noise (µVrms) 4 PSRR at 100 KHz (dB) 45 Iq (typ) (mA) 10 Features Adjustable current limit, Enable, Power good, Soft start Thermal resistance θJA (°C/W) 30.5 Load capacitance (min) (µF) 6.8 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 400 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (krad) 50
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • Total Ionizing Dose radiation characterized:
    • Radiation hardness assurance (RHA) availability of 100krad(Si) or 50krad(Si)

  • Single-Event Effects (SEE) Characterized
    • Single-event latch-up (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) characterized to LET = 75MeV-cm2/mg
    • Single-event transient (SET) characterized to LET = 75MeV-cm2/mg
  • Wide VIN range: 2.25V to 14V
  • 2A maximum output current
  • ±1.5% accuracy VIN > 3V over load, and temperature
  • ±1.8% accuracy VIN < 3V over load, and temperature
  • Soft start (SS) control through an external capacitor
  • Open-drain power good (PG) output for power sequencing
  • Programmable current limit through an external resistor (CL)
  • Optional external control loop compensation utilizing the STAB pin
  • Excellent load and line transient response
  • Plastic packages out gas tested per ASTM E595
  • Military (–55°C to 125°C) temperature range
  • Total Ionizing Dose radiation characterized:
    • Radiation hardness assurance (RHA) availability of 100krad(Si) or 50krad(Si)

  • Single-Event Effects (SEE) Characterized
    • Single-event latch-up (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) characterized to LET = 75MeV-cm2/mg
    • Single-event transient (SET) characterized to LET = 75MeV-cm2/mg
  • Wide VIN range: 2.25V to 14V
  • 2A maximum output current
  • ±1.5% accuracy VIN > 3V over load, and temperature
  • ±1.8% accuracy VIN < 3V over load, and temperature
  • Soft start (SS) control through an external capacitor
  • Open-drain power good (PG) output for power sequencing
  • Programmable current limit through an external resistor (CL)
  • Optional external control loop compensation utilizing the STAB pin
  • Excellent load and line transient response
  • Plastic packages out gas tested per ASTM E595
  • Military (–55°C to 125°C) temperature range

The TPS7H1121 is a radiation-hardened, low dropout linear regulator (LDO) which operates over a wide input voltage range and is optimized for powering devices in a space environment. The device is capable of sourcing up to 2A over a 2.25V to 14V input.

The device offers excellent stability and features a programmable current limit with a wide adjustment range. To support the complex power requirements of FPGAs, DSPs, and microcontrollers, the TPS7H1121 provides enable on and off functionality, programmable soft start, and a power good open-drain output.

The TPS7H1121 is a radiation-hardened, low dropout linear regulator (LDO) which operates over a wide input voltage range and is optimized for powering devices in a space environment. The device is capable of sourcing up to 2A over a 2.25V to 14V input.

The device offers excellent stability and features a programmable current limit with a wide adjustment range. To support the complex power requirements of FPGAs, DSPs, and microcontrollers, the TPS7H1121 provides enable on and off functionality, programmable soft start, and a power good open-drain output.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
TPS7H1111-SEP 現行 耐輻射、1.5-A、超低雜訊、超高 PSRR RF LDO 穩壓器 This is a lower-noise higher-PSRR -SEP LDO.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 13
重要文件 類型 標題 格式選項 日期
* Data sheet TPS7H1121-SP and TPS7H1121-SEP 2.25V to 14V Input, 2A, Radiation Hardened Low Dropout (LDO) Linear Regulator datasheet (Rev. C) PDF | HTML 2025年 11月 3日
* VID TPS7H1121-SEP VID TPS7H1121-SEP VID V62/23604 2026年 3月 4日
* Radiation & reliability report TPS7H1121-SP Total Ionizing Dose (TID) Radiation Report (Rev. A) 2026年 2月 13日
* Radiation & reliability report TPS7H1121-SEP Neutron Displacement Damage (NDD) Characterization 2025年 12月 5日
* Radiation & reliability report TPS7H1121-SEP Production Flow and Reliability Report (Rev. A) PDF | HTML 2025年 10月 31日
* Radiation & reliability report TPS7H1121-SEP Total Ionizing Dose (TID) Radiation Report 2025年 10月 16日
* Radiation & reliability report TPS7H1121-SEP Single-Event Effects (SEE) PDF | HTML 2025年 10月 15日
Application note Highly Scalable Space Motor Control Platform based on TI’s Space Enhanced Products (-SEP) and Space Products PDF | HTML 2026年 6月 8日
Selection guide TI Space Products (Rev. L) 2026年 3月 27日
Certificate TPS7H1121EVM EU Declaration of Conformity (DoC) 2025年 6月 12日
Technical article 航太級強化產品如何因應低地球軌道應用的挑戰 (Rev. A) PDF | HTML 2024年 1月 11日
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 2022年 9月 15日
E-book Radiation Handbook for Electronics (Rev. A) 2019年 5月 21日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7H1121EVM — 適用於 2.25V 至 14V 輸入、2A 低壓差 (LDO) 穩壓器的 TPS7H1121-SEP 和 QMLP 評估模組

TPS7H1121EVM 展示單一 TPS7H1121-SEP LDO 穩壓器(塑膠封裝)的運作。電路板提供可裝入其他元件的元件封裝,以便進行自訂配置測試,並提供測試點和 SMA 連接器,以簡化性能驗證。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS7H1121-SP PSpice Model

SLVME97.ZIP (36 KB) - PSpice Model
參考設計

TIDA-011004 — 航太級 3U VPX 電源供應模組參考設計

此參考設計為符合航太級 3U VPX 架構 VITA-62 標準的航太級電源供應模組。Space VPX 標準透過定義模組化且可擴充系統的架構,讓這類系統可用於各種不同的任務型態,從而實現了標準化和互操作性。此參考設計採用精巧外型尺寸實作,同時維持高整體性能。
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 24 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片