首頁 電源管理 AC/DC & DC/DC converters (integrated FET)
首頁
電源管理
AC/DC & DC/DC converters (integrated FET)

TPS7H4010-SEP

現行

採用塑膠封裝的耐輻射、3.5-V 至 32-V 輸入、6-A、同步降壓轉換器

立即訂購
產品規格表

TPS7H4010-SEP

現行
產品規格表 立即訂購

產品詳細資料

Iout (max) (A) 6 Vin (min) (V) 3.5 Vin (max) (V) 32 Topology Buck Type Converter Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Features Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Fixed Control mode current mode Vout (min) (V) 1 Vout (max) (V) 30.4 Rating Space Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.000015
Iout (max) (A) 6 Vin (min) (V) 3.5 Vin (max) (V) 32 Topology Buck Type Converter Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Features Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Fixed Control mode current mode Vout (min) (V) 1 Vout (max) (V) 30.4 Rating Space Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.000015
DIESALE (KGD) — See data sheet WQFN (RNP) 30 24 mm² 6 x 4
  • Radiation Hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Synchronizable to external clock
  • Internal compensation
  • Power-good flag
  • Precision enable to program system UVLO
  • Fixed or adjustable soft-start time
  • Cycle-by-cycle current limiting
  • Short-circuit protection with hiccup mode
  • Thermal shutdown protection
  • Radiation Hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Synchronizable to external clock
  • Internal compensation
  • Power-good flag
  • Precision enable to program system UVLO
  • Fixed or adjustable soft-start time
  • Cycle-by-cycle current limiting
  • Short-circuit protection with hiccup mode
  • Thermal shutdown protection

The TPS7H4010-SEP is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 6 A of load current from a supply voltage ranging from 3.5 V to 32 V. The TPS7H4010-SEP provides exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, FPWM option, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The device requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limiting, and hiccup short-circuit protection.

The TPS7H4010-SEP is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 6 A of load current from a supply voltage ranging from 3.5 V to 32 V. The TPS7H4010-SEP provides exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, FPWM option, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The device requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limiting, and hiccup short-circuit protection.
open-in-new 尋找其它 AC/DC & DC/DC converters (integrated FET)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
TPS7H4003-SEP 現行 採用航太級強化型塑膠封裝的耐輻射、3-V 至 7-V、18-A、同步降壓轉換器 Higher current device with the capability to easily parallel up to 4 devices for 72 A.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 16
類型 標題 日期
* Data sheet TPS7H4010-SEP Radiation Hardened 3.5-V to 32-V, 6-A Synchronous Step-Down Voltage Converter in Space Enhanced Plastic datasheet (Rev. A) PDF | HTML 2021年 12月 2日
* Radiation & reliability report Single-Event Effects Test Report of the TPS7H4010-SEP (Rev. A) 2022年 10月 20日
* Radiation & reliability report TPS7H4010-SEP Production Flow and Reliability Report (Rev. A) PDF | HTML 2022年 7月 29日
* VID TPS7H4010-SEP VID V62-19623 2020年 12月 8日
* Radiation & reliability report TPS7H4010-SEP Neutron Displacement Damage Characterization 2020年 11月 30日
* Radiation & reliability report TPS7H4010-SEP Total Ionizing Dose (TID) Radiation Report 2020年 11月 25日
Technical article 航太級強化產品如何因應低地球軌道應用的挑戰 (Rev. A) PDF | HTML 2024年 1月 11日
Application note Using Space Grade Power Components to Power AMD Kintex XQRKU060 FPGA PDF | HTML 2023年 11月 8日
Application note Using Space Grade Power Components to Power Microchip RTAX-S/SL FPGA PDF | HTML 2023年 9月 29日
Application note Using Space Grade Power Components to Power Microchip RT PolarFire FPGA PDF | HTML 2023年 9月 20日
Application note Radiation Tolerant Inverting Buck-Boost Converter with TPS7H4010-SEP PDF | HTML 2023年 6月 16日
Application note Space Grade Power Solution for Microsemi RTG4 PDF | HTML 2023年 5月 2日
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 2022年 9月 15日
Selection guide TI Space Products (Rev. I) 2022年 3月 3日
EVM User's guide TPS7H4010EVM User's Guide 2020年 10月 7日
E-book Radiation Handbook for Electronics (Rev. A) 2019年 5月 21日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7H4010EVM — TPS7H4010-SEP 抗輻射 3.5-V 至 32-V、6-A 降壓電壓轉換器評估模組

The TPS7H4010 evaluation module (EVM) demonstrates how the TPS7H4010-SEP buck converter can provide a regulated power rail capable of load current up to 6 A to support typical satellite power applications.

使用指南: PDF
TI.com 無法提供
開發板

ALPHA-3P-ADM-VA600-SPACE-AMD — Alpha Data ADM-VA600 套件，使用 AMD Versal 核心 XQRVC1902 ACAP 和 TI 耐輻射產品

外型尺寸採用 6U VPX，強調 AMD-Xilinx® Versal AI Core XQRVC1902 適應性 SoC/FPGA。ADM-VA600 為模組化機板設計，配備一個 FMC+ 連接器、DDR4 DRAM 及系統監控。零組件多數為耐輻射電源管理、介面、時脈與嵌入式處理裝置。

來源：Alpha Data Parallel Systems Ltd.
造訪合作夥伴網站
模擬型號

TPS7H4010-SEP PSpice Model (Rev. B)

SNVMC40B.ZIP (22 KB) - PSpice Model
下載
模擬型號

TPS7H4010-SEP PSpice Transient Model (Rev. A)

SNVMC54A.ZIP (38 KB) - PSpice Model
下載
模擬型號

TPS7H4010-SEP TINA-TI SPICE Model (Rev. A)

SNVMC39A.TSC (18 KB) - TINA-TI Spice Model
下載
模擬型號

TPS7H4010-SEP TINA-TI Transient SPICE Model

SNVMC53.TSC (56 KB) - TINA-TI Spice Model
下載
參考設計

TIDA-010260 — 4T5R 航太級整合式收發器參考設計

4T5R 航太級整合式收發器參考設計整合了完整的 RF 取樣收發器，包括時脈解決方案和電源解決方案。此設計在 VITA-57 規格內整合了所有 -SEP 型 TI 裝置和符合航太標準的被動元件。
Design guide: PDF
封裝 引腳 下載
DIESALE (KGD) —
WQFN (RNP) 30 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片