TPS92210

現行

具串疊 MOSFET 且適用 LED 照明的恒定導通時間驅動器控制器

產品詳細資料

Vin (max) (V) 20 Operating temperature range (°C) -40 to 125 Control mode Current Topology Buck, Flyback Rating Catalog Duty cycle (max) (%) 2
Vin (max) (V) 20 Operating temperature range (°C) -40 to 125 Control mode Current Topology Buck, Flyback Rating Catalog Duty cycle (max) (%) 2
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Flexible Operation Modes
    • Constant On-Time Enables Single Stage PFC Implementation
    • Peak Primary Current
  • Cascoded MOSFET Configuration
    • Fully Integrated Current Control Without Sense Resistor
    • Fast and Easy Startup
  • Discontinuous Conduction Mode or Transition Mode Operation
  • Transformer Zero Energy Detection
    • Enables Valley Switching Operation
    • Helps to Achieve High Efficiency and Low EMI
  • Open LED Detection
  • Advanced Overcurrent Protection
  • Output Overvoltage Protection
  • Line Surge Ruggedness
  • Internal Over-Temperature Protection
  • 8-Pin SOIC (D) Package
  • Flexible Operation Modes
    • Constant On-Time Enables Single Stage PFC Implementation
    • Peak Primary Current
  • Cascoded MOSFET Configuration
    • Fully Integrated Current Control Without Sense Resistor
    • Fast and Easy Startup
  • Discontinuous Conduction Mode or Transition Mode Operation
  • Transformer Zero Energy Detection
    • Enables Valley Switching Operation
    • Helps to Achieve High Efficiency and Low EMI
  • Open LED Detection
  • Advanced Overcurrent Protection
  • Output Overvoltage Protection
  • Line Surge Ruggedness
  • Internal Over-Temperature Protection
  • 8-Pin SOIC (D) Package

The TPS92210 is a natural power factor correction (PFC) light emmitting diode (LED) lighting driver controller with advanced energy features to provide high efficiency control for LED lighting applications.

A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation in all regions of operation. The TPS92210 cascode architecture enables low switching loss in the primary side and when combined with the discontinuous conduction mode (DCM) operation ensures that there is no reverse recovery loss in the output rectifier. These innovations result in efficiency, reliability or system cost improvements over a conventional flyback architecture.

The TPS92210 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. The overload fault response is user-programmed for retry or latch mode. Additional protection features include open-LED detection by output overvoltage protection and thermal shutdown.

The TPS92210 is offered in the 8-pin SOIC (D) package. Operating junction temperature range is –40°C to 125°C

The TPS92210 is a natural power factor correction (PFC) light emmitting diode (LED) lighting driver controller with advanced energy features to provide high efficiency control for LED lighting applications.

A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation in all regions of operation. The TPS92210 cascode architecture enables low switching loss in the primary side and when combined with the discontinuous conduction mode (DCM) operation ensures that there is no reverse recovery loss in the output rectifier. These innovations result in efficiency, reliability or system cost improvements over a conventional flyback architecture.

The TPS92210 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. The overload fault response is user-programmed for retry or latch mode. Additional protection features include open-LED detection by output overvoltage protection and thermal shutdown.

The TPS92210 is offered in the 8-pin SOIC (D) package. Operating junction temperature range is –40°C to 125°C

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet Single-Stage PFC Driver Controller for LED Lighting datasheet (Rev. B) 2012年 8月 10日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Application note Line Undervoltage and Overvoltage Protection for TPS92210-Based LED Drivers 2015年 8月 14日
Application note Extending Dimming Range of TPS92210 Over Universal AC Range by Applying Frequenc 2013年 6月 16日
Test report Using the TPS92210-PMP6001, A Universal Input 38V 350mA Non Dimmable LED Driver1 2010年 12月 10日
Test report Using the TPS92210-PMP6002 (Rev. A) 2010年 12月 10日
Test report Using the TPS92210-PMP6003 (Rev. A) 2010年 12月 10日
EVM User's guide Using the TPS92210EVM-647 Natural PFC LED Lighting Driver Controller (Rev. B) 2010年 12月 9日
EVM User's guide Using the TPS92210EVM-613 Natural PFC LED Lighting Driver Controller (Rev. A) 2010年 11月 2日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS92210EVM-613 — 具備自然 PFC 功能的替換用 230VAC TRIAC 可調光燈泡專用的 TPS92210 評估模組

The TPS92210EVM-613 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the TPS92210 in a single stage PFC 230VAC light bulb replacement design that is TRIAC dimmable.
使用指南: PDF
TI.com 無法提供
開發板

TPS92210EVM-647 — 具有自然 PFC 功能且適用於替代 120VAC TRIAC 可調光燈泡的 TPS92210 評估模組

The TPS92210EVM-647 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the TPS92210 in a single stage PFC 120VAC light bulb replacement design that is TRIAC dimmable.
使用指南: PDF
TI.com 無法提供
計算工具

TPS92210_DESIGN_CALC TPS92210 Design Calculator

The TPS92210 Design Calculator is a design tool for an AC/DC single LED string driver with a PFC and TRIAC dimming option. When using this tool the minimum output voltage should be greater than 5.2V and maximum output power should be less than 30W.
支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC controllers (external FET)
TPS92210 具串疊 MOSFET 且適用 LED 照明的恒定導通時間驅動器控制器
參考設計

PMP6023 — 適用於筒燈、格柵燈和模組的 25W、100-264VAC 輸入、0-10V 可調光 LED 驅動器

This is an isolated, 25W, 0-10V dimmable LED driver design with >0.9 power factor (PF) which meets or exceeds commercial lighting PF and total harmonic distortion (THD) requirements.  It is well suited for integral LED luminaires, or ballasts, that use high-brightness LED emitters.  (...)
Test report: PDF
電路圖: PDF
封裝 引腳 下載
SOIC (D) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片