首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)
首頁
電源管理
DC/DC 電源模組
電源模組 (整合式電感器)
最新

TPSM828502-Q1

現行
立即訂購
產品規格表

TPSM828502-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 2 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features 1% accuracy, Enable, Forced PWM, Frequency synchronization, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO adjustable EMI & noise features Low parasitic Hotrod packaging Operating temperature range (°C) -40 to 125 Type Converter, Converter (Integrated Switch), DC/DC converter, Module Duty cycle (max) (%) 100 Control mode Current, current mode, current mode control Switching frequency (min) (kHz) 4000 Switching frequency (max) (kHz) 1800
Rating Automotive Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 2 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features 1% accuracy, Enable, Forced PWM, Frequency synchronization, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO adjustable EMI & noise features Low parasitic Hotrod packaging Operating temperature range (°C) -40 to 125 Type Converter, Converter (Integrated Switch), DC/DC converter, Module Duty cycle (max) (%) 100 Control mode Current, current mode, current mode control Switching frequency (min) (kHz) 4000 Switching frequency (max) (kHz) 1800
QFN-FCMOD (RDY) 9 8.1 mm² (2.7 mm × 3 mm)
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C TA
  • Optimized for low EMI requirements
    • Pin-selectable pseudo-random spread spectrum (SSC) reduces peak emissions
  • TJ = –40°C to +150°C
  • Input voltage range: 2.7V to 6V
  • Quiescent current: 17µA typical
  • Output voltage from 0.6V to 5.5V
  • Output voltage accuracy ±1% (PWM operation)
  • Forced PWM or PWM/PFM operation
  • Adjustable switching frequency: 1.8MHz to 4MHz
  • Precise ENABLE input allows:
    • User-defined undervoltage lockout
    • Exact sequencing
  • 100% duty cycle mode
  • Active output discharge
  • Foldback overcurrent protection – optional
  • Power-good output with window comparator
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C TA
  • Optimized for low EMI requirements
    • Pin-selectable pseudo-random spread spectrum (SSC) reduces peak emissions
  • TJ = –40°C to +150°C
  • Input voltage range: 2.7V to 6V
  • Quiescent current: 17µA typical
  • Output voltage from 0.6V to 5.5V
  • Output voltage accuracy ±1% (PWM operation)
  • Forced PWM or PWM/PFM operation
  • Adjustable switching frequency: 1.8MHz to 4MHz
  • Precise ENABLE input allows:
    • User-defined undervoltage lockout
    • Exact sequencing
  • 100% duty cycle mode
  • Active output discharge
  • Foldback overcurrent protection – optional
  • Power-good output with window comparator

TPSM82850x-Q1 is a family of pin-to-pin compatible, 1A, and 2A, automotive high-efficiency and easy to use synchronous step-down DC/DC power modules with integrated inductors. The devices use a fixed-frequency peak current-mode control topology and are suitable for automotive applications with high power density and ease of use requirements. Low resistance switches allow up to 2A continuous output current at high ambient temperatures. The switching frequency can be fixed at 2.25MHz through pin-strapping or selected from a range of 1.8MHz to 4MHz through a set resistor. The module can also be synchronized to an external clock in the range from 1.8MHz to 4MHz. In PFM/PWM mode, the TPSM82850x-Q1 automatically enters power save mode at light loads to maintain high efficiency across the whole load range. The TPSM82850x-Q1 provides a 1% feedback voltage accuracy in PWM mode which helps design a power supply with high output voltage accuracy. The COMP/FSET pin sets the switching frequency, one out of two loop compensation settings and the SSC function for a wide variety of load conditions

TPSM82850x-Q1 is a family of pin-to-pin compatible, 1A, and 2A, automotive high-efficiency and easy to use synchronous step-down DC/DC power modules with integrated inductors. The devices use a fixed-frequency peak current-mode control topology and are suitable for automotive applications with high power density and ease of use requirements. Low resistance switches allow up to 2A continuous output current at high ambient temperatures. The switching frequency can be fixed at 2.25MHz through pin-strapping or selected from a range of 1.8MHz to 4MHz through a set resistor. The module can also be synchronized to an external clock in the range from 1.8MHz to 4MHz. In PFM/PWM mode, the TPSM82850x-Q1 automatically enters power save mode at light loads to maintain high efficiency across the whole load range. The TPSM82850x-Q1 provides a 1% feedback voltage accuracy in PWM mode which helps design a power supply with high output voltage accuracy. The COMP/FSET pin sets the switching frequency, one out of two loop compensation settings and the SSC function for a wide variety of load conditions
filter 尋找其它 電源模組 (整合式電感器)
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPSM82850x-Q1 Automotive 2.7V to 6V Input, 1A and 2A Step-Down Power Module With Integrated Inductor datasheet PDF | HTML 2025/11/10

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPSM828502QEVM-159 — TPSM828502-Q1 評估模組

TPSM82850x-Q1 裝置為具整合式電感器的接腳相容 1A 和 2A 車用高效率同步降壓 DC/DC 電源模組系列。這些裝置使用固定頻率峰值電流模式控制拓撲結構。這些模組可在需要高功率密度和易於使用的汽車應用中使用。低電阻開關在高溫環境下允許高達 2A 連續輸出電流。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
QFN-FCMOD (RDY) 9 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片