首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)
首頁
電源管理
DC/DC 電源模組
電源模組 (整合式電感器)

TPSM83102

現行

具有含 I²C 整合式電感器的 1.5A 輸出電流、降壓升壓 MicroSiP™ 電源模組

立即訂購
產品規格表

TPSM83102

現行
立即訂購

產品詳細資料

Rating Catalog Topology Buck-Boost Iout (max) (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 1.6 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Features Enable, I2C, Light-load efficiency, Load Disconnect, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 3 Type Module Duty cycle (max) (%) 100 Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200
Rating Catalog Topology Buck-Boost Iout (max) (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 1.6 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Features Enable, I2C, Light-load efficiency, Load Disconnect, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 3 Type Module Duty cycle (max) (%) 100 Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200
USIP (SIU) 8 See data sheet mm² (— mm × — mm)
  • 1.6V to 5.5V input voltage range
    • Device input voltage > 1.65V for start-up
  • 1V to 5.5V output voltage range(adjustable)
  • High output current capability, 3A peak switch current
    • 1.5A output current for VIN ≥ 3V, VOUT = 3.3V
    • 1.2A output current for VIN ≥ 2.7V, VOUT = 3.3V
  • High efficiency over the entire load range
    • 8µA typical quiescent current
    • Automatic power save mode and forced PWM mode configurable
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • Small solution size
    • 2.6mm × 2.0mm × 1.2mm(max) 8-pin µSiP package
  • 1.6V to 5.5V input voltage range
    • Device input voltage > 1.65V for start-up
  • 1V to 5.5V output voltage range(adjustable)
  • High output current capability, 3A peak switch current
    • 1.5A output current for VIN ≥ 3V, VOUT = 3.3V
    • 1.2A output current for VIN ≥ 2.7V, VOUT = 3.3V
  • High efficiency over the entire load range
    • 8µA typical quiescent current
    • Automatic power save mode and forced PWM mode configurable
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • Small solution size
    • 2.6mm × 2.0mm × 1.2mm(max) 8-pin µSiP package

The TPSM83102 and TPSM83103 are constant frequency peak current mode control buck-boost converters in samll µSiP module package. It has a 3A peak current limit (typical) and 1.6V to 5.5V input voltage range, and provide a power supply solution for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPSM83102 and TPSM83103 automatically operate in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8µA quiescent current and power save mode power enable the highest efficiency for light to no-load conditions.

The device offers a very small solution size in µSiP module package.

The TPSM83102 and TPSM83103 are constant frequency peak current mode control buck-boost converters in samll µSiP module package. It has a 3A peak current limit (typical) and 1.6V to 5.5V input voltage range, and provide a power supply solution for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPSM83102 and TPSM83103 automatically operate in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8µA quiescent current and power save mode power enable the highest efficiency for light to no-load conditions.

The device offers a very small solution size in µSiP module package.
filter 尋找其它 電源模組 (整合式電感器)
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPSM83102 and TPSM83103 1.2A Output Current Buck-Boost Module datasheet (Rev. A) PDF | HTML 2025/1/10
技術文章 電源模組封裝類型及其優勢 PDF | HTML Download English Version 2024/8/12
證書 TPSM83102EVM-125 EU Declaration of Conformity (DoC) 2024/6/25

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPSM83102EVM — TPSM83102 評估模組

TPSM83102 評估模組 (EVM) 的設計宗旨，在於協助使用者輕鬆評估和測試 TPSM83102 降壓升壓轉換器的運作和功能性。EVM 的輸出電壓設為 3.3V。輸出電壓可透過介於 1V 與 5.5V 間的 I2C 介面進行程式設計。EVM 以 1.6V 至 5.5V 之間的輸入電壓運作，當 VIN≥2.7V 時，輸出電流最高可達 1.5A。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
USIP (SIU) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片