TPUL2T323
- RC configurable from 10ms to 880s
- Extended pulse width functionality reduces capacitor value required for long pulse widths by factor of 1000
- For pulses less than 10ms, use TPUL2G123
- 1% typical, 10% maximum pulse width variation
- Wide operating range of 1.5V to 5.5V
- Inputs accept voltages up to 5.5V
- TTL-compatible with 4.5V to 5.5V supply
- Schmitt-trigger architecture on all inputs
- Single-supply voltage translator (refer to Reduced Input Threshold Voltage):
- Up translation:
- 1.2V to 1.8V
- 1.5V to 2.5V
- 1.8V to 3.3V
- 3.3V to 5.0V
-
Down translation:
- 5.0V, 3.3V, 2.5V to 1.8V
- 5.0V, 3.3V to 2.5V
- 5.0V to 3.3V
- Up translation:
The TPUL2T323 device contains two independent extended-pulse-width RC-configurable retriggerable monostable multivibrators designed for 1.5V to 5.5V operation. The output pulse duration is configured by selecting external resistance and capacitance values with an approximate output pulse width of two ≅ 1000 × R × C.
This device features three inputs, allowing for rising edge (T) and falling edge (T) triggers and a clear input (CLR) that can be used asynchronously to stop an active output pulse. All inputs include Schmitt-trigger architecture to allow for slow input transition rates and improve noise immunity.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPUL2T323 Dual Retriggerable Extended RC-Timed Monostable Multivibrators datasheet | PDF | HTML | 2025年 4月 3日 |
Product overview | Transitioning to TPUL Family Monostable Multivibrators | PDF | HTML | 2025年 3月 27日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPUL1X1000-EVM — TPUL1X1000 評估模組
此 EVM 可讓使用者評估 TPUL 裝置,而不需要將裝置焊接到電路板上。使用者可視覺化 K = 1 與 K = 1,000 裝置的體積與尺寸差異。此電路板已針對標準與延伸脈衝寬度 TPUL 裝置預先配置等脈衝寬度,以展示解決方案尺寸的差異。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
TSSOP (PW) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點