TS5A3159A
- Specified Break-Before-Make Switching
- Isolation in Power-Down Mode, V+ = 0
- Terminal Compatible With TS5A3159 Device
- Low ON-State Resistance (1 Ω)
- Control Inputs are 5.5-V Tolerant
- Low Charge Injection
- Excellent On-State Resistance Matching
- Low Total Harmonic Distortion (THD)
- 1.65-V to 5.5-V Single-Supply Operation
- Latch-Up Performance Exceeds 100 mA
Per JESD 78, Class II - ESD Performance Tested Per JESD
- 2000-V Human-Body Model
(A114-B, Class II) - 1000-V Charged-Device Model (C101)
- 2000-V Human-Body Model
The TS5A3159A device is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to 5.5 V. The device offers low on-state resistance and excellent ON-state resistance matching with the break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to another. The device has an excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications.
您可能會感興趣的類似產品
功能相同，但針腳輸出與所比較的裝置不同。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TS5A3159A 1-Ω SPDT Analog Switch 5-V and 3.3-V Single-Channel 2:1 Multiplexer and Demultiplexer datasheet (Rev. F) | PDF | HTML | 2018/1/29 | ||
| 應用說明 | High-Efficiency Charging for TWS Using a 2-Pin Interface Application Report (Rev. A) | PDF | HTML | 2023/5/16 | |||
| 應用說明 | Selecting the Correct Texas Instruments Signal Switch (Rev. E) | PDF | HTML | 2022/6/2 | |||
| 應用說明 | Multiplexers and Signal Switches Glossary (Rev. B) | PDF | HTML | 2021/12/1 | |||
| Application brief | Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C) | PDF | HTML | 2021/1/6 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DIP-ADAPTER-EVM — DIP 轉接器評估模組
Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.
The (...)
LEADLESS-ADAPTER1 — 用於測試 TI 的 6、8、10、12、14、16 和 20 針腳無引線封裝的表面貼裝至 DIP 接頭適配器
PMP40182 — 雙向電池初始化系統電源板參考設計
TIDC-CC2650STK-SENSORTAG — SimpleLink™ 多標準 CC2650 SensorTag™ 套件參考設計
全新的 SimpleLink™ 多標準 SensorTag 套件，協助您實現您的物聯網 (IoT) 產品構想。該套件在一個小型封裝中包含 10 個低功率 MEMS 感測器，並且可以透過 DevPacks 進行擴展，從而輕鬆添加您自己的感測器或致動器。
透過 Bluetooth® 連接雲端，並在三分鐘內於線上取得感測器資料。SensorTag 在開箱後即可透過 iOS 及 Android 應用程式立即使用，不需具備任何編程經驗就能上手。
全新 SensorTag 以 CC2650 無線微控制器 (MCU) 為基礎，相較於先前的 Bluetooth 產品，可減少 75% (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| SOT-SC70 (DCK) | 6 | Ultra Librarian |
| DSBGA (YZP) | 6 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。