支援軟體
TUSS4440
- Integrated driver for transformer driven transducers and receiver stage with analog output for ultrasound applications
- 86-dB input dynamic range analog front-end
- First stage low noise amplifier adjustable to 10, 12.5, 15 and 20 V/V
- Configurable bandpass filter from 40 KHz to 500 KHz
- Wide-band logarithmic amplifier
- Supported transducer frequencies (controlled by external clock)
- 40 KHz to 400 KHz
- For low-power applications
- Standby mode: 1.7 mA (typical)
- Sleep mode: 220 µA (typical)
- Configurable drive stage:
- Complimentary low-side drivers with current limit for transformer based transducer excitation
- Configurable burst patterns using IO1 and IO2 pins
- Outputs:
- Voltage output of the demodulated echo envelope on VOUT
- Input signal zero crossing comparator output on OUT3 pin
- Programmable VOUT threshold crossing on OUT4 pin
- Serial Peripheral Interface (SPI) for configuration by microcontroller (MCU)
The TUSS4440 is a highly integrated transformer drive analog front end for industrial ultrasonic applications. The transducer drive stage consists of low-side complementary drivers that can be configured to drive an ultrasonic transducer through a step-up transformer. The device delivers constant current to the primary side of the transformer.
The receive signal path includes a low-noise linear amplifier, a bandpass filter, followed by a logarithmic gain amplifier for input dependent amplification. The logarithmic amplifier allows for high sensitivity for weak echo signals and offers excellent input dynamic range over full range of reflected echoes.
The drivers can be controlled directly through the microcontroller for complete customization of the burst signal, or can be programmed through SPI with a customizable burst length. The TUSS4440 can support a single transducer to send and receive burst signals, or can set up two transducers to split the send and receive functions.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TUSS4440 Transformer Drive Ultrasonic Sensor IC With Logarithmic Amplifier datasheet (Rev. A) | PDF | HTML | 2022年 5月 19日 |
| Application note | Ultrasonic Sensing Basics (Rev. D) | PDF | HTML | 2021年 12月 2日 | |
| Technical article | Shrink your solution size with transformer-less ultrasonic ICs | PDF | HTML | 2020年 6月 15日 | |
| User guide | TUSS44x0 EVM for Ultrasonic Sensors User's Guide (Rev. A) | 2020年 4月 2日 | ||
| Application note | TUSS44x0 Software Development Guide | PDF | HTML | 2020年 3月 17日 | |
| Application note | Logarithmic Amplifier for Ultrasonic Sensor Signal Conditioning | 2020年 3月 13日 | ||
| E-book | E-book: An engineer’s guide to industrial robot designs | 2020年 2月 12日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
BOOSTXL-TUSS4440 — 具有 LDO 的 TUSS4440 變壓器驅動超音波轉換器評估模組
The TUSS4440 EVM is a collective of the BOOSTXL-TUSS4440 and MSP-EXP430F5529LP, which enables users to fully evaluate the TUSS4440 ultrasonic sensor signal conditioner and transformer driver. Transducer compatibility is expanded to open- or closed-top transducers operating between 30 to 500 kHz. (...)
使用指南: PDF
Gerber 檔案
Transformer-Drive Ultrasonic Proximity Sensing Module Design Files (TUSS4440PSM)
SLDC024.ZIP (4505 KB)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| WQFN (RTJ) | 20 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。