UC2856Q
-40C 至 125C 的 40V、1.5A 電流模式 1MHz PWM 控制器
功能相似於所比較的產品。
UC2856Q
- Pin-for-Pin Compatible With the UC2846
- 65-ns Typical Delay From Shutdown to
Outputs and 50-ns Typical Delay From
Sync to Outputs - Improved Current Sense Amplifier With
Reduced Noise Sensitivity - Differential Current Sense With 3-V
Common Mode Range - Trimmed Oscillator Discharge Current for
Accurate Deadband Control - Accurate 1-V Shutdown Threshold
- High Current Dual Totem Pole
Outputs (1.5-A peak) - TTL Compatible Oscillator SYNC Pin
Thresholds - 4-kV ESD Protection
The UC2856 is a high performance version of the popular UC2846 series of current mode controllers, and is intended for both design upgrades and new applications where speed and accuracy are important. All input to output delays have been minimized, and the current sense output is slew rate limited to reduce noise sensitivity. Fast 1.5-A peak output stages have been added to allow rapid switching of power FETs.
A low impedance TTL compatible sync output has been implemented with a 3-state function when used as a sync input.
Internal chip grounding has been improved to minimize internal noise caused when driving large capacitive loads. This, in conjunction with the improved differential current sense amplifier, results in enhanced noise immunity.
Other features include a trimmed oscillator current (8%) for accurate frequency and dead time control; a 1 V, 5% shutdown threshold; and 4 kV minimum ESD protection on all pins.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | UC2856Q: Improved Current Mode PWM Controller datasheet (Rev. A) | 2011/5/26 |