首頁 電源管理 AC/DC 和 DC/DC 控制器 (外部 FET)

UCC256404

現行

具有超低功耗、超靜音待機運作和高電壓啟動功能的 LLC 全橋式控制器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
最新 UCC25661 現行 具有高電壓啟動功能的大範圍 VIN 和 VOUT 750KHz LLC 控制器 Capable of higher operating frequency and supports wider VIN/VOUT operation

產品詳細資料

Rating Catalog Topology Half bridge, LLC Vin (max) (V) 30 Vin (min) (V) 13 Control mode Current Features HV Start-up, High voltage gate driver integrated, High voltage startup, High-voltage startup, Hybrid hysteretic control, Integrated X-cap discharge, LLC, Light load efficiency, Light-load efficiency, Low power, USB C/PD compatible, Wide AC input, X cap discharge integrated, X capacacitor discharge integrated, Zero voltage switching Operating temperature range (°C) -40 to 125
Rating Catalog Topology Half bridge, LLC Vin (max) (V) 30 Vin (min) (V) 13 Control mode Current Features HV Start-up, High voltage gate driver integrated, High voltage startup, High-voltage startup, Hybrid hysteretic control, Integrated X-cap discharge, LLC, Light load efficiency, Light-load efficiency, Low power, USB C/PD compatible, Wide AC input, X cap discharge integrated, X capacacitor discharge integrated, Zero voltage switching Operating temperature range (°C) -40 to 125
SOIC (DDB) 14 59.4 mm² 9.9 x 6
  • Optimized low power mode and burst mode algorithm
    • Burst mode with Soft-ON and Soft-OFF periods
    • Minimized audible noise at no load and standby
    • User option to disable burst mode
    • Opto-coupler low power operation
    • Efficiency performance exceeds DoE Level VI and EU CoC Tier-2 External Power Supply Standards
  • Hybrid hysteretic control (HHC)
    • Best-in-class transient response
    • Fast exit from burst mode
  • Robust adaptive dead-time control
  • Integrated high-voltage gate driver with 0.6 A source and 1.2 A sink capability
  • Robust capacitive region (ZCS) avoidance scheme
  • Over temperature, output over voltage, input under voltage protection, three levels of over current protection
  • Integrated high voltage startup function
  • Active X-capacitor discharge function
  • Optimized low power mode and burst mode algorithm
    • Burst mode with Soft-ON and Soft-OFF periods
    • Minimized audible noise at no load and standby
    • User option to disable burst mode
    • Opto-coupler low power operation
    • Efficiency performance exceeds DoE Level VI and EU CoC Tier-2 External Power Supply Standards
  • Hybrid hysteretic control (HHC)
    • Best-in-class transient response
    • Fast exit from burst mode
  • Robust adaptive dead-time control
  • Integrated high-voltage gate driver with 0.6 A source and 1.2 A sink capability
  • Robust capacitive region (ZCS) avoidance scheme
  • Over temperature, output over voltage, input under voltage protection, three levels of over current protection
  • Integrated high voltage startup function
  • Active X-capacitor discharge function

The UCC25640x is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed to pair with a PFC controller to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC25640x provides a highly efficient burst mode with soft-on and soft-off periods to minimize audible noise at standby operation. The burst power level and hysteresis are programmable, simplifying the optimization of efficiency and burst mode operation. Burst mode can also be disabled through pin configuration. UCC25640x uses hybrid hysteretic control to provide best in class line and load transient response.

UCC25640x includes a range of features designed to make LLC converter operation well controlled and protected. It can be used with UCC28056 or UCC28064A PFC controllers, along with UCC24624 synchronous rectifier controller to offer a complete power supply solution.

The UCC25640x is a fully featured LLC controller with integrated high-voltage gate driver. It has been designed to pair with a PFC controller to provide a complete power system using a minimum of external components. The resulting power system is designed to meet the most stringent requirements for standby power without the need for a separate standby power converter.

UCC25640x provides a highly efficient burst mode with soft-on and soft-off periods to minimize audible noise at standby operation. The burst power level and hysteresis are programmable, simplifying the optimization of efficiency and burst mode operation. Burst mode can also be disabled through pin configuration. UCC25640x uses hybrid hysteretic control to provide best in class line and load transient response.

UCC25640x includes a range of features designed to make LLC converter operation well controlled and protected. It can be used with UCC28056 or UCC28064A PFC controllers, along with UCC24624 synchronous rectifier controller to offer a complete power supply solution.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 15
類型 標題 日期
* Data sheet UCC25640x LLC Resonant Controller with Ultra-Low Audible Noise and Standby Power datasheet (Rev. E) PDF | HTML 2021年 2月 19日
Technical article Implementing LLC current-mode control on the secondary side with a digital controller PDF | HTML 2025年 7月 22日
Certificate UCC256404 IEC 62368 2025年 6月 12日
Application note Zero Current Switching Issues with Burst Mode in LLC Controllers (Rev. A) PDF | HTML 2025年 4月 9日
Technical article 在完整運作條件下進行測試之前測量您的 LLC 諧振電路 PDF | HTML 2024年 3月 21日
Technical article 音訊放大器的 LLC 設計考量 PDF | HTML 2024年 3月 13日
Application note Most Frequently Asked Questions About the UCC25640x LLC Resonant Controller PDF | HTML 2023年 6月 5日
Application note UCC25640x LLC Resonant Controller Features Brief Overview and Bring up Guideline PDF | HTML 2022年 6月 20日
Application note Improving Transient Response in LLC Converters Using Hybrid Hysteretic Control (Rev. B) 2021年 4月 7日
Technical article How to reduce audible noise and power consumption at standby in your AC/DC design PDF | HTML 2020年 4月 22日
Certificate UCC256404 IEC60065 Certification 2020年 4月 10日
Certificate UCC256404 IEC60950 Certification 2020年 2月 19日
Certificate UCC256404 IEC62368 Certification 2020年 2月 19日
Application note Migrating to UCC25640x from UCC25630x (Rev. A) 2019年 12月 10日
Application note Improving ZVS and efficiency in LLC converters 2018年 11月 5日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

PFCLLCSREVM034 — 具有 UCC28056B、UCC256404 和 UCC24624 的 AC 至隔離式 DC EVM

PFCLLCSREVM034 是一款 168 W AC/DC 電源,具備轉換模式功率因數校正前端和具同步整流功能的隔離式半橋 LLC 共振轉換器。此 EVM 可在 90 Vrms 至 264 Vrms 的 AC 輸入範圍內運作,並在 168 W 全負載輸出功率下輸出 12-V DC。

使用指南: PDF
TI.com 無法提供
開發板

UCC25640EVM-020 — UCC25640x 半橋 LLC 評估模組

UCC25640EVM-020 是使用 UCC256404 的 180W、LLC 共振轉換器。此 EVM 可接受 360V 至 410V 的 DC 輸入、85VAC 至 264VAC 的 AC 輸入電壓,並輸出 12VDC 和 180W 滿載輸出功率。
使用指南: PDF
TI.com 無法提供
模擬型號

UCC25640x Simplis Model

SLUM684.ZIP (178 KB) - SIMPLIS Model
計算工具

SLUC675 UCC25640x Design Calculator

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 控制器 (外部 FET)
UCC256402 具有超低待機電源和高電壓啓動的 LLC 全橋式控制器 UCC256403 具有超低功耗和超靜音待機運作的 LLC 全橋式控制器 UCC256404 具有超低功耗、超靜音待機運作和高電壓啟動功能的 LLC 全橋式控制器
參考設計

PMP40580 — 180-W 通用輸入 PFC + LLC TV 電源供應參考設計

此為設計用於電視應用的 AC 轉 DC 電源供應器,提供通用 AC 電壓 (90 Vac 至 264 Vac) 的 12 V、5 A和 150 V、0.8 A 輸出。此設計採用 CRM/DCM PFC 控制器 UCC28056 以及具有強化突衝模式的 LLC 控制器 UCC256404,可實現低待機功耗和更小可聞噪音。  此設計可在 150 mW 負載下實現 < 250 mW 的待機功耗,且在 230 Vac 輸入時的峰值效率 >93%。
Test report: PDF
電路圖: PDF
參考設計

PMP31179 — 適用於航空電子產業的 400-W AC/DC 參考設計

這是一款精巧的 30-V DC、400-W 參考設計,適合介於 400 Hz 和 800 Hz 之間的主電源頻率的航空電子應用。採用 UCC28064A 為基礎的雙相交錯轉換模式 (TM) 功率因數校正 (PFC),可修正功率因數,並將輸入電流的諧波含量降到最低。DC/DC 使用具有 UCC256404 的 HB-LLC 階段進行實作。在二次側使用同步整流可進一步提升效率。
Test report: PDF
參考設計

PMP22087 — 具有 80 PLUS 白金相容性能的 336-W 無輔助 AC/DC 電源供應參考設計

此參考設計為配備重要導通模式 (CRM) PFC 和半橋 LLC 串聯共振轉換器的 AC/DC 電源供應設計,可從通用輸入 AC 電壓(90 VAC 至 264 VAC)提供 24V、240-W 連續輸出、336-W 峰值輸出。此設計採用 UCC28056 CRM/DCM PFC 控制器、UCC256404 強化型 LLC 控制器,以及啟用突衝模式以實現低待機功率損耗的 UCC24612-2 同步整流器控制器。此設計在 115VAC 時可實現 87mW,在 230VAC 時則可實現 124mW,在 115-VAC 輸入時也可實現 93.4% 峰值效率,在 230-VAC 輸入時則可實現 (...)
Test report: PDF
電路圖: PDF
參考設計

PMP22088 — LLC 全橋式轉換器控制卡參考設計

此參考設計是 LLC 轉換器的控制卡,整合控制 LLC 轉換器的所有必要功能,其中包括 HV 啟動、X 電容器放電和功率 FET 驅動器。採用進階突衝模式也可幫助 LLC 轉換器實現超低待機功耗,即使在 PFC 開啟的情況下也不例外。此設計可靈活評估,適用於 LLC 電源板的任何額定功率。利用現有功率級簡單連接即可輕鬆設定工作台測試。 
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DDB) 14 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片