首頁 電源管理 AC/DC 切換穩壓器 AC/DC 控制器

UCC2813-0

現行

具有 7.2V/6.9V UVLO 和 100% 工作週期、-40C 至 85C 的經濟型低功耗 BICMOS 1MHz 電流模式 PWM

產品詳細資料

Topology Boost, Flyback, Forward Control mode Current Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 100
Topology Boost, Flyback, Forward Control mode Current Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 100
TSSOP (PW) 8 19.2 mm² (3 mm × 6.4 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • 100µA typical starting supply current
  • 500µA typical operating supply current
  • Operation to 1MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current-sense signal
  • 1A totem-pole output
  • 70ns typical response from current-sense to gate-drive output
  • 1.5% tolerance voltage reference
  • Same pinout as the UCC3802 device, UC3842 device, and UC3842A device families
  • 100µA typical starting supply current
  • 500µA typical operating supply current
  • Operation to 1MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current-sense signal
  • 1A totem-pole output
  • 70ns typical response from current-sense to gate-drive output
  • 1.5% tolerance voltage reference
  • Same pinout as the UCC3802 device, UC3842 device, and UC3842A device families

The UCC3813-x device family of high-speed, low-power integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC384x device family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC3813-x device family offers a variety of package options, temperature-range options, choice of maximum duty cycle, and choice of critical voltage levels. Devices with lower reference voltage such as the UCC3813-3 and UCC3813-5 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC3813-2 device and UCC3813-4 device make these ideal choices for use in off-line power supplies.

The UCC2813-x device series is specified for operation from –40°C to 85°C and the UCC3813-x device series is specified for operation from 0°C to 70°C.

The UCC3813-x device family of high-speed, low-power integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC384x device family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC3813-x device family offers a variety of package options, temperature-range options, choice of maximum duty cycle, and choice of critical voltage levels. Devices with lower reference voltage such as the UCC3813-3 and UCC3813-5 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC3813-2 device and UCC3813-4 device make these ideal choices for use in off-line power supplies.

The UCC2813-x device series is specified for operation from –40°C to 85°C and the UCC3813-x device series is specified for operation from 0°C to 70°C.

下載 觀看有字幕稿的影片 影片

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

UCCx800 & UCCx813-0 Unencrypted PSpice Transient Model

SLUM512.ZIP (6 KB) - PSpice 模型
支援產品和硬體
模擬型號

UCCx800 TINA-TI Start-Up Reference Design

SLUM191.TSC (860 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

UCCx800 TINA-TI Steady-State Reference Design

SLUM190.TSC (862 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

UCCx800 TINA-TI Transient Spice Model

SLUM192.ZIP (28 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

UCCx813-0, UCCx800 Families PSpice Transient Model (Rev. B)

SLUM068A (88 KB) - PSpice 模型
支援產品和硬體
參考設計

PMP11287 — 超寬輸入範圍 (10.8V 至 264V) 偏壓電源參考設計

PMP11287 可處理 10.8VDC 至 264VDC 或 15VAC 至 264VAC 的輸入電壓範圍,並產生 12V/55mA 輸出。透過使用 UCC2813 PWM 控制器(可達 100% 工作週期)與降升壓拓撲,實現此超寬輸入範圍的電源供應器設計。此電路板的尺寸為 20mm(寬)x 60mm(長)x 10.5mm(高)。
支援產品和硬體
參考設計

PMP20182 — 超寬輸入範圍 (10.8V 至 264V AC 或 DC) 偏壓電源參考設計

PMP20182 可處理 10.8V 至 264V 的 AC 或 DC 輸入電壓範圍,並產生 12V/55mA 輸出。透過使用 UCC2813 PWM 控制器(可達 100% 工作週期)與降升壓拓撲,實現此超寬輸入範圍的電源供應器設計。本設計採用耗盡型 MOSFET 以達成快速啟動,在 12VDC 輸入下可實現小於 50mS 的啟動時間。電路板尺寸為 20mm(寬)x 60mm(長)x 10.5mm(高)。
支援產品和硬體
參考設計

PMP2187 — 適用於醫療組的返馳、線性穩壓器 (10mA 下為 5.75V) 參考設計

此設計提供隔離式 5V (x2)、3.3V、2.5V 和 -5V 輸出。所有輸出皆使用低壓降 (LDO) 線性穩壓器進行雜訊濾波,適用於對雜訊敏感的應用,如醫學影像及資料擷取。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片