UCC28782

現行

適用於主動鉗位 (ACF) 和零電壓開關 (ZVS) 拓撲的高密度返馳控制器

產品詳細資料

Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback Rating Catalog
Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback Rating Catalog
WQFN (RTW) 24 16 mm² 4 x 4
  • Active clamp recovers leakage inductance energy

  • Adaptive control for fast zero voltage switching (ZVS) tracking and dead time optimization

  • Integrated switching bias regulator supports USB Type-C PD wide output voltage range with one auxiliary winding
  • EMI frequency dithering without trade-offs on transient response or audible noise
  • Dynamic bias power management for digital isolator and GaN driver
  • Programmable Adaptive Burst Mode (ABM) with internal compensation
  • Active X-capacitor (X-cap) discharge
  • Over-temperature, over-voltage, output short-circuit, over-current, over-power, and pin-fault protections
  • Auto-recovery and group-latch fault options with fast latch-reset capability

  • 4x4-mm 24-pin QFN package

  • Active clamp recovers leakage inductance energy

  • Adaptive control for fast zero voltage switching (ZVS) tracking and dead time optimization

  • Integrated switching bias regulator supports USB Type-C PD wide output voltage range with one auxiliary winding
  • EMI frequency dithering without trade-offs on transient response or audible noise
  • Dynamic bias power management for digital isolator and GaN driver
  • Programmable Adaptive Burst Mode (ABM) with internal compensation
  • Active X-capacitor (X-cap) discharge
  • Over-temperature, over-voltage, output short-circuit, over-current, over-power, and pin-fault protections
  • Auto-recovery and group-latch fault options with fast latch-reset capability

  • 4x4-mm 24-pin QFN package

The UCC28782 is a high-density active-clamp flyback (ACF) controller for USB Type C™ PD applications and allows for efficiencies over 93% by recovering the leakage inductance energy and adaptive ZVS tracking over the full load range.

With a maximum frequency of 1.5 MHz the magnetics can be minimized. Frequency dithering helps to improve EMI margin. The UCC28782 also integrates dynamic bias power management to optimize the gate drive for Si or GaN MOSFETs.

Adaptive Burst Mode (ABM) combined with Low Power Mode (LPM) and Standby Power mode (SBP) work together to increase light-load efficiency while reducing ripple and audible noise.

The UCC28782 also integrates an X-Cap discharge function to discharge the residual input voltage when power is removed.

The UCC28782 has multiple protection modes and options for retry or latch-off responses depending on the application needs. See Device Comparison Table.

The UCC28782 is a high-density active-clamp flyback (ACF) controller for USB Type C™ PD applications and allows for efficiencies over 93% by recovering the leakage inductance energy and adaptive ZVS tracking over the full load range.

With a maximum frequency of 1.5 MHz the magnetics can be minimized. Frequency dithering helps to improve EMI margin. The UCC28782 also integrates dynamic bias power management to optimize the gate drive for Si or GaN MOSFETs.

Adaptive Burst Mode (ABM) combined with Low Power Mode (LPM) and Standby Power mode (SBP) work together to increase light-load efficiency while reducing ripple and audible noise.

The UCC28782 also integrates an X-Cap discharge function to discharge the residual input voltage when power is removed.

The UCC28782 has multiple protection modes and options for retry or latch-off responses depending on the application needs. See Device Comparison Table.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet UCC28782 High-Density Active-Clamp Flyback Controller with EMI Dithering, X-Cap Discharge, and Bias Power Management datasheet (Rev. E) PDF | HTML 2023年 6月 27日
Technical article 如何以非耗散箝位提升返馳效率 PDF | HTML 2024年 3月 13日
Application note Enabling Small-Form-Factor AC/DC Adapters With use of Integrated GaN Technology PDF | HTML 2023年 3月 27日
EVM User's guide Using the UCC28782EVM-030 (Rev. C) PDF | HTML 2022年 7月 28日
Application brief Flyback Selection Guide PDF | HTML 2022年 6月 23日
Application note UCC28782 Practical Design Guidelines PDF | HTML 2021年 10月 15日
Application note UCC28782 System Bring Up Guideline and Common Issues PDF | HTML 2021年 9月 29日
Analog Design Journal Transformer structures that achieve low EMI with low- and high-side rectifiers 2020年 9月 22日
Certificate UCC28782EVM-030 EU Declaration of Conformity (DoC) (Rev. A) 2020年 6月 29日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28782EVM-030 — 具有 ISO7710FD 的 UCC28782 主動鉗位反馳式轉換器 65-W USB-C PD EVM

UCC28782EVM-030 使用 UCC28782 主動鉗位返馳控制器展現 65-W USB Type-C™ 離線適配器的高效率和高密度。輸入支援通用 90 Vac 至 264 Vac,單輸出在最大電流 3-A 時可設爲 5 V、9 V 和 15 V,最大電流 3.25-A 時則為 20 V,可透過 USB PD 介面控制器進行調整。250-kHz 額定的高頻率操作可縮小解決方案尺寸,多模式操作則可維持高效率。LMG2610 整合了高壓側與低壓側 FET、閘極驅動器、高壓側位準移位器,並提供無耗損電流感測模擬。輸出則採用同步整流以提升效率。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

UCC28782 SIMPLIS Model with 65W GaN ACF

SLUM740.ZIP (617 KB) - SIMPLIS Model
計算工具

SLURAZ0 UCC28782 Design Calculator Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 控制器 (外部 FET)
UCC28782 適用於主動鉗位 (ACF) 和零電壓開關 (ZVS) 拓撲的高密度返馳控制器
參考設計

PMP23146 — 適用伺服器輔助電源且具 GaN 的 45-W 高功率密度主動箝位返馳參考設計

此參考設計是針對最高功率密度設計的 GaN 式 45-W 主動箝位返馳 (ACF)。此電源供應器的設計旨在為伺服器和電信電源供應裝置 (PSU) 提供輔助電源。UCC28782 ACF 控制器和 LMG2610 GaN 半橋用於使用 UCC24612 驅動具有同步整流功能的平面變壓器。此輔助電源設計用途旨在以 PFC 匯流排電壓作為輸入來運作,並產生隔離式 12-V 輸出,可提供 3.7 A 與非隔離式 18-V 輸出,並可供電達 400 mA。主要隔離式 12-V 輸出受到 TPS74800 ORing 控制器的保護。多重 PMP23146 (...)
Test report: PDF
參考設計

PMP23224 — 220 W 主動箝位電池充電器參考設計

此參考設計為搭載功率因數校正 (PFC) 前端的 220-W 主動箝位返馳電池充電器設計。此設計採用 90 V 至 264 V 通用 AC 輸入,並以 6-V 至 22-V VOUT 範圍進行電池充電。
Test report: PDF
參考設計

PMP22244 — 具備 GaN 的 60-W USB Type-C® 高密度主動箝位返馳參考設計

此參考設計為高密度、60-W 115-VAC 輸入電源供應,適合採用 UCC28782 主動箝位返馳控制器、LMG2610 整合式 GaN 半橋和 UCC24612 同步整流器驅動器的 USB Type-C 應用。最大功率額定值在 20-V 或 15-V 輸出時為 60 W,在 9-V 輸出時為 54 W,在 5-V 輸出時則為 30 W。此設計的峰值效率可達 94.8%。設計尺寸為 1.5 英寸 x 3.35 英寸 x 1 英寸 (37.5 毫米 x 85 毫米 x 25 毫米)。
Test report: PDF
參考設計

PMP22322 — 65-W USB Type-C® ZVS 返馳參考設計

此參考設計為低成本、高密度 USB 轉接器,在 ZVS 返馳拓撲中使用 UCC28782 主動箝位返馳控制器和 UCC5304 隔離式驅動器。在 20-V 輸出時最大功率額定值為 65 W,但可針對 20-V/15-V/9-V/5-V 輸出電壓和 3 A 進行調整。此設計的峰值效率達 93.4%。平均效率和待機功率位準的設計符合 DoE Level VI 和 CoC Tier 2 限制。精巧設計尺寸爲 44 mm x 54 mm x 20 mm (48 cc 開放式框架)。
使用指南: PDF
電路圖: PDF
封裝 引腳 下載
WQFN (RTW) 24 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片