ALTOS-3P-RF6-RCU

ALTOS-3P-RF6-RCU

Order now

Overview

The Altos Radar Inc. RF6 + RCU is a modular 4D imaging radar system for automotive and robotics development. Each RF6 radar head uses a TI AWR2188 transceiver with 8Tx and 8Rx channels. The Radar Compute Unit (RCU) uses a TI TDA4VEN-Q1 processor to centrally process data from up to four RF6 units over GMSL2 links. Separating the radar heads from signal processing enables compact corner sensors and flexible surround-view installations. The system delivers real-time, single-frame point clouds with range, azimuth, elevation, and Doppler velocity through 100BASE-T1 Ethernet and UDP. ROS 1 and ROS 2 drivers, configuration tools, and integration documentation help customers evaluate the hardware and connect it to their perception software. Altos Radar also offers antenna and signal-processing customization for application-specific requirements.

Features
  • RF6: TI AWR2188-based 8Tx/8Rx radar head with waveguide antenna; maximum range up to 300 m.
  • Wide field of view: 160° azimuth × 45° elevation; angular resolution of 2° azimuth and 5.6° elevation.
  • RCU: TI TDA4VEN-Q1 central processing for two or four RF6 heads over GMSL2 links.
  • Real-time, single-frame 4D point clouds; up to 4,000 points/frame (mode-dependent) and up to 15 fps.
  • 100BASE-T1 Ethernet/UDP output; ROS 1 / ROS 2 drivers; PTP synchronization and external triggering.
  • Compact, low-power hardware: RF6 4 W; RCU 10 W. System input: 9–36 V.
Automotive driver assist SoCs
TDA4VEN-Q1 — SoC with Quad Arm® Cortex®-A53, 4 TOPS of AI, C7xDSP, and GPU for vision perception and analytics

 

Automotive mmWave radar sensors
AWR2188 — Single-chip 8RX/8TX cascadable 76GHz-to-81GHz transceiver with launch-on-package (LoP) technology
Download View video with transcript Video
Photos courtesy of Altos Radar Inc.

Order & start development

Evaluation board

ALTOS-RCU — Altos radar RCU TDA4VEN-Q1 compute unit for two or four RF6 heads

Supported products & hardware

ALTOS-RCU — Altos radar RCU TDA4VEN-Q1 compute unit for two or four RF6 heads

close
Version: null
Release date:
Evaluation board

ALTOS-RF6 — Altos radar RF6 8Tx/8Rx AWR2188 radar head for use with RCU

Supported products & hardware

ALTOS-RF6 — Altos radar RF6 8Tx/8Rx AWR2188 radar head for use with RCU

close
Version: null
Release date:
TI's Standard Terms and Conditions for Evaluation Items apply.

Support & training

Third-party support
TI does not offer ongoing direct design support for this hardware. For support while working through your design, contact Altos Radar Inc..

Videos

Disclaimer

Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.