DRV8436PEVM

DRV8436P PWM motor driver evaluation module

DRV8436PEVM

Order now

Overview

The DRV8436P evaluation module (EVM) allows easy evaluation of the DRV8436P device.

DRV8436P is an integrated motor-driver solution for bipolar stepper motors. The device integrates two N-channel power MOSFET H-bridges, integrated current sense and regulation circuitry, and a microstepping indexer. DRV8436P can be powered with a supply voltage from 4.5 V to 48 V. A simple PWM control interface allows for an external controller to manage the direction and step rate of the stepper motor. The decay mode can be selected as a slow, fast, mixed-decay or smart-tune dynamic decay current regulation scheme.

For more information on this evaluation module, please refer to the DRV8436P data sheet.

Features
  • 4.5-V to 48-V operating voltage range
  • 2.5-A peak current
  • Simple PWM control interface
  • Integrated current sense
  • Smart-tune technology

  • DRV8436PEVM board

Stepper motor drivers
DRV8436E 48-V, 1.5-A bipolar stepper or dual-brushed motor driver with integrated current sensing

 

MSP430 microcontrollers
MSP430F2617 16 MHz MCU with 92KB Flash, 8KB SRAM, 12-bit ADC, Dual 12-bit DAC, I2C/SPI/UART, HW multiplier, DMA
Download View video with transcript Video

Order & start development

Evaluation board

DRV8436PEVM

DRV8436P PWM motor driver evaluation module

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
Support software

SLOC359 — DRV8436PEVM Firmware

Supported products & hardware
Download

SLOC359 DRV8436PEVM Firmware

close
Latest version
Version: 01.00.00.00
Release date: 24 Jul 2019
download DRV8436PEVM Firmware (zip)  — 138 K

Checksum
Hardware development
Evaluation board
DRV8436PEVM DRV8436P PWM motor driver evaluation module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sloc359 or www.ti.com/lit/xx/sloc359/sloc359.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC359. Please update any bookmarks accordingly.
Design tool

SLOC356 — MD027_DRV84xx_89xxP_8256xEVM Design Files

Supported products & hardware
Download

SLOC356 MD027_DRV84xx_89xxP_8256xEVM Design Files

close
Latest version
Version: 01.00.00.0B
Release date: 29 Oct 2020

Checksum
Hardware development
Evaluation board
DRV8256EEVM DRV8256 PHASE/ENABLE control interface H-bridge motor driver evaluation module DRV8256PEVM DRV8256 PWM control interface H-bridge motor driver evaluation module DRV8424EEVM DRV8424 PHASE/EN control interface stepper motor driver board DRV8424EVM DRV8424 STEP/DIR control interface stepper motor driver board DRV8424PEVM DRV8424 PWM control interface stepper motor driver board DRV8426EEVM DRV8426 PHASE/EN control interface stepper motor driver board DRV8426EVM DRV8426 STEP/DIR control interface stepper motor driver board DRV8426PEVM DRV8426P motor driver evaluation module DRV8434EEVM DRV8434 PHASE/EN control interface stepper motor driver board DRV8434EVM DRV8434 STEP/DIR control interface stepper motor driver board DRV8434PEVM DRV8434 PWM control interface stepper motor driver board DRV8436EEVM DRV8436E PH/EN stepper motor driver evaluation module DRV8436EVM DRV8436 stepper drivers evaluation module DRV8436PEVM DRV8436P PWM motor driver evaluation module DRV8932PEVM DRV8932 quad half-bridge driver with integrated current sense evaluation module DRV8935PEVM DRV8935 H-bridge driver evaluation module DRV8955PEVM DRV8955 quad half-bridge driver with integrated current sense evaluation module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sloc356 or www.ti.com/lit/xx/sloc356b/sloc356b.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC356. Please update any bookmarks accordingly.
Support software

SLOC361 — DRV8436xEVM GUI Windows Installer

Supported products & hardware
Download

SLOC361 DRV8436xEVM GUI Windows Installer

close
Latest version
Version: 01.00.00.00
Release date: 24 Jul 2019
download DRV8436xEVM GUI Windows Installer (zip)  — 28066 K

Checksum
Hardware development
Evaluation board
DRV8436EEVM DRV8436E PH/EN stepper motor driver evaluation module DRV8436PEVM DRV8436P PWM motor driver evaluation module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sloc361 or www.ti.com/lit/xx/sloc361/sloc361.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC361. Please update any bookmarks accordingly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Design files

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* EVM User's guide DRV84XX_89XX_8256X Evaluation Module User's Guide (Rev. D) 30 Oct 2020
Certificate DRV8436PEVM EU Declaration of Conformity (DoC) (Rev. A) 13 Feb 2024
User guide DRV84xxPEVM GUI User’s Guide (Rev. A) 18 May 2020

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos