Multi-sensor platform reference design on Jacinto™ ADAS processors
TIDEP-01008
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
See the Important Notice and Disclaimer covering reference designs and other TI resources.
Key Document
Description
The multi-sensor platform reference design for Advanced Driver Assistance Systems (ADAS) from D3 Engineering provides qualified developers with a fully functioning evaluation platform for testing and development of ADAS applications, for use primarily in the automotive industry. D3 also offers System On a Module (SOM) solutions, consisting of ADAS embedded processors (e.g. TDA3x) that work with this reference design.
DesignCore™ TDA3x Automotive Starter Kit from D3
Features
- Provides an easy-to-use reference design of a base platform that supports multiple automotive LVDS-based sensor systems
- Provides a platform to plug-n-play with TDA3-based CPU module (D3 Engineering SOM)
- Provides a path to an automotive-grade baseboard for potential use with other processor SOMs
See the Important Notice and Disclaimer covering reference designs and other TI resources.
Schematic/Block Diagram
Quickly understand overall system functionality.

Download Schematic
Test Data
Get results faster with test and simulation data that's been verified.

Download Test Data
TI Devices (13)
Order samples, get tools and find more information on the TI products in this reference design.
Sample & Buy |
Design Kits & Evaluation Modules |
DP83867CR |
Low-power, robust gigabit Ethernet PHY transceiver in a small QFN package |
Ethernet ICs |
Sample & Buy |
View Design Kits & Evaluation Modules |
HVDA551-Q1 |
Automotive 5-V CAN Transceiver with I/O Level Adapting and Low-Power Mode Supply Optimization |
Interface |
Not Available |
Not Available |
TCA9539 |
16-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers |
I2C ICs |
Sample & Buy |
View Design Kits & Evaluation Modules |
TFP410 |
165-MHz TMDS DVI transmitter/serializer & Panelbus™ integrated circuit |
Interface |
Sample & Buy |
Not Available |
TMP102 |
±2°C 1.4V to 3.6V digital temperature sensor with I2C/SMBus in 2.56mm2 package |
Temperature sensors |
Sample & Buy |
View Design Kits & Evaluation Modules |
TPD12S520 |
HDMI recei-Ver port protection and interface device |
Interface |
Sample & Buy |
View Design Kits & Evaluation Modules |
TPD12S521 |
HDMI transmitter port protection and interface device |
Interface |
Sample & Buy |
Not Available |
TPS1H100-Q1 |
40-V, 100-mΩ, 1-ch automotive smart high-side switch with adjustable current limit |
Power switches |
Not Available |
View Design Kits & Evaluation Modules |
TPS22965 |
5.7-V, 6-A, 16-mΩ load switch with adj. rise time and optional output discharge |
Power switches |
Sample & Buy |
View Design Kits & Evaluation Modules |
TPS54341 |
4.5 to 42V Input 3.5A Step-Down DC-DC Converter With Soft-Start and Eco-mode™ |
Step-down (buck) regulators |
Sample & Buy |
View Design Kits & Evaluation Modules |
TPS61240 |
2.3-V to 5.5-V input range, 3.5-MHz fixed frequency 450-mA boost converter |
Step-up (boost) regulators |
Sample & Buy |
View Design Kits & Evaluation Modules |
TPS62090 |
3A, 6V input, up to 97% efficiency, Synchronous Step Down Converter with DCS™ Control |
Step-down (buck) regulators |
Sample & Buy |
View Design Kits & Evaluation Modules |
TPS62170 |
3–17V 0.5A Step-Down Converter with DCS-Control in 2x2 QFN package |
Step-down (buck) regulators |
Sample & Buy |
View Design Kits & Evaluation Modules |
CAD/CAE symbols
Texas Instruments and Accelerated Designs, Inc. have collaborated together to provide TI customers with schematic symbols and PCB layout footprints for TI products.
Step 1: Download and install the free download.
Step 2: Download the Symbol and Footprint from the CAD.bxl file table.
Texas Instruments and Accelerated Designs, Inc. have collaborated together to provide TI customers with schematic symbols and PCB layout footprints for TI products.
Step 1: Download and install the free download.
Step 2: Download the Symbol and Footprint from the CAD.bxl file table.
Step 3: Open the .bxl file with the Ultra Librarian software.
You can always access the complete CAD/CAE Symbols database at https://webench.ti.com/cad/
Both PCB footprints and schematic symbols are available for download in a vendor neutral format, which can then be exported to the leading EDA CAD/CAE design tools using the Ultra Librarian Reader. The reader is available as a (free download.).
The UL Reader is a subset of the Ultra Librarian toolset that can generate, import, and export components and their attributes in virtually any EDA CAD/CAE format.
Technical documentation
See the Important Notice and Disclaimer covering reference designs and other TI resources.
Datasheet (1)
Title | Type | Size (KB) | Date |
| PDF | 4034 |
04 Feb 2020
|
User guide (1)
Title | Type | Size (KB) | Date |
| PDF | 5761 |
20 Dec 2018
|
Design files (6)
| ZIP | 9248 |
20 Dec 2018
|
| ZIP | 19327 |
20 Dec 2018
|
| ZIP | 2151 |
20 Dec 2018
|
| ZIP | 2027 |
20 Dec 2018
|
| PDF | 254 |
20 Dec 2018
|
| ZIP | 1263 |
20 Dec 2018
|
Support & training
Search our extensive online knowledge base where millions of technical questions and answers are available 24/7.
Search answers from TI experts
Content is provided 'AS IS' by the respective TI and Community contributors and does not constitute TI specifications.
See terms of use.
If you have questions about quality, packaging, or ordering TI products visit our Support page.