SLUSF65 October   2023 BQ25185

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Description (continued)
  7. 6 Pin Configuration and Functions
  8. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Thermal Information
    4. 7.4 Recommended Operating Conditions
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Requirements
    7. 7.7 Typical Characteristics
  9. 8 Detailed Description
    1. 8.1 Overview
      1. 8.1.1 Battery Charging Process
        1. 8.1.1.1 Trickle Charge
        2. 8.1.1.2 Pre-Charge
        3. 8.1.1.3 Fast Charge
        4. 8.1.1.4 ISET Pin Detection
        5. 8.1.1.5 Termination
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Input Voltage Based Dynamic Power Management (VINDPM)
      2. 8.3.2  Dynamic Power Path Management Mode (DPPM)
      3. 8.3.3  Battery Supplement Mode
      4. 8.3.4  Sleep Mode
      5. 8.3.5  SYS Regulation
      6. 8.3.6  ILIM/VSET Control
      7. 8.3.7  Protection Mechanisms
        1. 8.3.7.1 Input Overvoltage Protection
        2. 8.3.7.2 Battery Undervoltage Lockout
        3. 8.3.7.3 Battery Overcurrent Protection
        4. 8.3.7.4 System Overvoltage Protection
        5. 8.3.7.5 System Short Protection
        6. 8.3.7.6 Thermal Protection and Thermal Regulation
        7. 8.3.7.7 Safety Timer
      8. 8.3.8  Pushbutton Wake and Reset Input
        1. 8.3.8.1 Pushbutton Long Button Press Function - Factory mode
      9. 8.3.9  External NTC Monitoring (TS)
        1. 8.3.9.1 TS Biasing and Function
      10. 8.3.10 Status Pins
    4. 8.4 Device Functional Modes
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Input Current and Battery Regulation Voltage - ILIM/VSET
        2. 9.2.2.2 Fast Charge Current- ISET
        3. 9.2.2.3 Recommended Passive Components
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 Third-Party Products Disclaimer
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.3.8.1 Pushbutton Long Button Press Function - Factory mode

The device will perform factory mode entry when the pushbutton is pressed (TS/MR is held low) for a time tLPRESS while a valid input is present, then removing VIN once the duration is met. Factory Mode is a low IQ state that turns off the SYS regulation to minimize battery consumption Toggling the /CE pin will restart the timer for the long press button when VIN is present.

GUID-20230814-SS0I-XGJP-8G8W-KJWZKHGNPCGL-low.svg Figure 8-3 Enter Factory Mode
GUID-20230814-SS0I-RMBJ-MNDL-BVNLWLFJ7VFF-low.svg Figure 8-4 Exit Factory Mode - VIN Insertion

To wake up the device from factory mode, insert a valid VIN. The TS/MR push button cannot be used to wake from Factory Mode.