JAJSFF6B june   2018  – september 2020 DS90C189-Q1

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Typical Application Diagrams
  6. 5 Revision History
  7. 6 Pin Configuration and Functions
    1.     DS90C189 Pin Descriptions
  8. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Recommended Input Characteristics
    7. 7.7 Switching Characteristics
    8. 7.8 AC Timing Diagrams
    9. 7.9 Typical Characteristics
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagrams
    3. 8.3 Feature Description
      1. 8.3.1 AEC-Q100 Qualified
      2. 8.3.2 ESD Protection
      3. 8.3.3 Operating Modes
      4. 8.3.4 LVDS Configurations
    4. 8.4 Device Functional Modes
      1. 8.4.1 Device Configuration
      2. 8.4.2 Single Pixel Input / Single Pixel Output
      3. 8.4.3 Single Pixel Input / Dual Pixel Output
      4. 8.4.4 Pixel Clock Edge Select (RFB)
      5. 8.4.5 Power Management
      6. 8.4.6 Sleep Mode (PDB)
      7. 8.4.7 LVDS Outputs
      8. 8.4.8 LVCMOS Inputs
    5. 8.5 Programming
      1. 8.5.1 LVDS Interface / TFT Color Data Recommended Mapping
        1. 8.5.1.1 Color Mapping Information
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 LVDS Interconnect Guidelines
      3. 9.2.3 Application Curves
  11. 10Power Supply Recommendations
    1. 10.1 Power Up Sequence
    2. 10.2 Power Supply Filtering
  12. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  13. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 ドキュメントの更新通知を受け取る方法
    3. 12.3 サポート・リソース
    4. 12.4 Trademarks
    5. 12.5 静電気放電に関する注意事項
    6. 12.6 用語集
  14. 13Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

10.2 Power Supply Filtering

The DS90C189-Q1 has several power supply pins at 1.8 V. It is important that these pins all be connected and properly bypassed. Bypassing should consist of at least one 0.1μF capacitor placed on each pin, with an additional 4.7 μF - 22 μF capacitor placed on the PLL supply pin (VDDP). 0.01 μF capacitors are typically recommended for each pin. Additional filtering including ferrite beads may be necessary for noisy systems. It is recommended to place a 0 ohm resistor at the bypass capacitors that connect to each power pin to allow for additional filtering if needed. A large bulk capacitor is recommended at the point of power entry. This is typically in the 50 μF — 100 μF range.