Product details

Frequency (min) (MHz) 450 Frequency (max) (MHz) 2000 Type Logarithmic Supply voltage (min) (V) 2.6 Supply voltage (max) (V) 5.5 Supply current (µA) 6900 Number of channels 2 Dynamic range (typ) (dB) 50 Operating temperature range (°C) -40 to 85 Rating Catalog
Frequency (min) (MHz) 450 Frequency (max) (MHz) 2000 Type Logarithmic Supply voltage (min) (V) 2.6 Supply voltage (max) (V) 5.5 Supply current (µA) 6900 Number of channels 2 Dynamic range (typ) (dB) 50 Operating temperature range (°C) -40 to 85 Rating Catalog
WSON (NGY) 10 9 mm² 3 x 3
  • Support of InGaP HBT, Bipolar Technology
  • Quad-Band Operation
  • Shutdown Mode for Power Save in RX Slot
  • Integrated Ramp Filter
  • 50 dB RF Detector
  • GPRS Compliant
  • External Loop Compensation Option
  • Accurate Temperature Compensation
  • WSON Package 3x3 mm and Fully Tested Die Sales

All trademarks are the property of their respective owners.

  • Support of InGaP HBT, Bipolar Technology
  • Quad-Band Operation
  • Shutdown Mode for Power Save in RX Slot
  • Integrated Ramp Filter
  • 50 dB RF Detector
  • GPRS Compliant
  • External Loop Compensation Option
  • Accurate Temperature Compensation
  • WSON Package 3x3 mm and Fully Tested Die Sales

All trademarks are the property of their respective owners.

The LMV242 is a power amplifier (PA) controller intended for use within an RF transmit power control loop in GSM/GPRS mobile phones. The LMV242 supports all single-supply PA’s including InGaP, HBT and bipolar power amplifiers. The device operates with a single supply from 2.6V to 5.5V.

Included in the PA controller are an RF detector, a ramp filter and two selectable output drivers that function as error amplifiers for two different bands. The LMV242 input interface consists two analog and two digital inputs. The analog inputs are the RF input, Ramp voltage input. The digital inputs perform the function of “Band Select” and “Shutdown/Transmit Enable” respectively. The “Band Select” function enables either of two outputs, namely OUT1 when BS = High, or output OUT2 when BS = Low. The output that is not enabled is pulled low to the minimum output voltage. The LMV242 is active in the case TX_EN = High. When TX_EN = Low the device is in a low power consumption shutdown mode. During shutdown both outputs will be pulled low to the minimum output voltage. Individual PA characteristics are accommodated by a user selectable external RC combination.

The LMV242 is offered in fully tested die form as well as in a 10-lead WSON package and is therefore especially suitable for small footprint PA module solutions.

The LMV242 is a power amplifier (PA) controller intended for use within an RF transmit power control loop in GSM/GPRS mobile phones. The LMV242 supports all single-supply PA’s including InGaP, HBT and bipolar power amplifiers. The device operates with a single supply from 2.6V to 5.5V.

Included in the PA controller are an RF detector, a ramp filter and two selectable output drivers that function as error amplifiers for two different bands. The LMV242 input interface consists two analog and two digital inputs. The analog inputs are the RF input, Ramp voltage input. The digital inputs perform the function of “Band Select” and “Shutdown/Transmit Enable” respectively. The “Band Select” function enables either of two outputs, namely OUT1 when BS = High, or output OUT2 when BS = Low. The output that is not enabled is pulled low to the minimum output voltage. The LMV242 is active in the case TX_EN = High. When TX_EN = Low the device is in a low power consumption shutdown mode. During shutdown both outputs will be pulled low to the minimum output voltage. Individual PA characteristics are accommodated by a user selectable external RC combination.

The LMV242 is offered in fully tested die form as well as in a 10-lead WSON package and is therefore especially suitable for small footprint PA module solutions.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet LMV242 Dual Output, Quad-Band GSM/GPRS Power Amplifier Controller datasheet (Rev. C) 02 May 2013
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
More literature Die D/S LMV242 MDA Dual Output, Quad-Band GSM/GPRS Power Amplifier Controller 08 Jan 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Package Pins CAD symbols, footprints & 3D models
WSON (NGY) 10 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos