TS5A23157-Q1

ACTIVE

Product details

Configuration 2:1 SPDT Number of channels 2 Power supply voltage - single (V) 1.8, 2.5, 3.3, 5 Protocols Analog, I2C, LVDS, UART Ron (typ) (Ω) 15 CON (typ) (pF) 17.5 ON-state leakage current (max) (µA) 1 Supply current (typ) (µA) 0.01 Bandwidth (MHz) 220 Operating temperature range (°C) -40 to 125 Features Break-before-make Input/output continuous current (max) (mA) 50 TI functional safety category Functional Safety-Capable Rating Automotive Drain supply voltage (max) (V) 5.5 Supply voltage (max) (V) 5.5
Configuration 2:1 SPDT Number of channels 2 Power supply voltage - single (V) 1.8, 2.5, 3.3, 5 Protocols Analog, I2C, LVDS, UART Ron (typ) (Ω) 15 CON (typ) (pF) 17.5 ON-state leakage current (max) (µA) 1 Supply current (typ) (µA) 0.01 Bandwidth (MHz) 220 Operating temperature range (°C) -40 to 125 Features Break-before-make Input/output continuous current (max) (mA) 50 TI functional safety category Functional Safety-Capable Rating Automotive Drain supply voltage (max) (V) 5.5 Supply voltage (max) (V) 5.5
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C4B
  • Functional safety-capable
    • Documentation available to aid functional safety system design
  • Customer-specific configuration control can be supported along with major-change approval
  • Specified break-before-make switching
  • Low ON-state resistance (15 Ω)
  • Control inputs are 5-V tolerant
  • Low charge injection
  • Excellent ON-resistance matching
  • Low total harmonic distortion
  • 1.8-V to 5.5-V single-supply operation
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C4B
  • Functional safety-capable
    • Documentation available to aid functional safety system design
  • Customer-specific configuration control can be supported along with major-change approval
  • Specified break-before-make switching
  • Low ON-state resistance (15 Ω)
  • Control inputs are 5-V tolerant
  • Low charge injection
  • Excellent ON-resistance matching
  • Low total harmonic distortion
  • 1.8-V to 5.5-V single-supply operation

The TS5A23157-Q1 is a dual, single-pole, double-throw (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. The device can transmit signals up to 5.5 V (peak) in either direction.

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI Web site at www.ti.com.

The TS5A23157-Q1 is a dual, single-pole, double-throw (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. The device can transmit signals up to 5.5 V (peak) in either direction.

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI Web site at www.ti.com.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet TS5A23157-Q1 Dual 15-Ω SPDT Analog Switch datasheet (Rev. B) PDF | HTML 17 Jun 2021
Application note Selecting the Correct Texas Instruments Signal Switch (Rev. E) PDF | HTML 02 Jun 2022
Application note Multiplexers and Signal Switches Glossary (Rev. B) PDF | HTML 01 Dec 2021
Functional safety information TS5A23157-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 29 Mar 2021
More literature Automotive Logic Devices Brochure 27 Aug 2014
Application note Preventing Excess Power Consumption on Analog Switches 03 Jul 2008
Application note Semiconductor Packing Material Electrostatic Discharge (ESD) Protection 08 Jul 2004

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Interface adapter

LEADED-ADAPTER1 — Surface mount to DIP header adapter for quick testing of TI's 5, 8, 10, 16 & 24-pin leaded packages

The EVM-LEADED1 board allows for quick testing and bread boarding of TI's common leaded packages.  The board has footprints to convert TI's D, DBQ, DCT,DCU, DDF, DGS, DGV, and PW surface mount packages to 100mil DIP headers.     

User guide: PDF
Not available on TI.com
Simulation model

TS5A23157 IBIS Model

SCEM497.ZIP (92 KB) - IBIS Model
Package Pins CAD symbols, footprints & 3D models
VSSOP (DGS) 10 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos