DAC102S085 10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output | TI.com

DAC102S085 (ACTIVE)

10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output

10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output - DAC102S085
 

Description

The DAC102S085 is a full-featured, general-purpose DUAL 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 0.6 mW at 3 V and 1.6 mW at 5 V. The DAC102S085 is packaged in 10-pin WSON and VSSOP packages. The 10-pin WSON package makes the DAC102S085 the smallest DUAL DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.

The reference for the DAC102S085 serves both channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC102S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. Both outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.

The low power consumption and small packages of the DAC102S085 make it an excellent choice for use in battery-operated equipment.

The DAC102S085 is one of a family of pin compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC122S085. The DAC102S085 operates over the extended industrial temperature range of –40°C to 105°C.

Features

  • Ensured Monotonicity
  • Low Power Operation
  • Rail-to-Rail Voltage Output
  • Power-On Reset to 0 V
  • Simultaneous Output Updating
  • Wide Power Supply Range (2.7 V to 5.5 V)
  • Industry’s Smallest Package
  • Power Down Modes
  • Key Specifications
    • Resolution: 10 Bits
    • INL: ±2 LSB (Maximum)
    • DNL: +0.35 or –0.25 LSB (Maximum)
    • Settling Time: 6 µs (Maximum)
    • Zero Code Error: 15 mV (Maximum)
    • Full-Scale Error: –0.75% FS (Maximum)
    • Supply Power
      • Normal: 0.6 mW at 3 V, 1.6 mW at 5 V
        (Typical)
      • Power Down: 0.3 µW at 3 V, 0.8 µW at 5 V
        (Typical)

View more

Parametrics Compare all products in Precision DACs (<=10MSPS)

 
Resolution (Bits)
Architecture
DAC Channels
Interface
Output Range (Max) (mA/V)
Output Range (Min) (mA/V)
Settling Time (µs)
Output Type
Reference: Type
Rating
Operating Temperature Range (C)
Features
DAC102S085 DAC082S085 DAC101S101 DAC101S101-Q1 DAC104S085 DAC108S085 DAC122S085
10     8     10     10     10     10     12    
String     String     String     String     String     String     String    
2     2     1     1     4     8     2    
SPI     SPI     SPI     SPI     SPI     SPI     SPI    
5.5     5.5     5.5     5.5     5.5     5.5     5.5    
0     0     0     0     0     0     0    
6     4.5     8     8     6     6     8.5    
Buffered Voltage     Buffered Voltage     Buffered Voltage     Buffered Voltage     Buffered Voltage     Buffered Voltage     Buffered Voltage    
Ext     Ext     Ext     Ext     Ext     Ext     Ext    
Catalog     Catalog     Catalog     Automotive     Catalog     Catalog     Catalog    
-40 to 105     -40 to 105     -40 to 105     -40 to 125     -40 to 105     -40 to 125     -40 to 105    
Cost Optimized
Low Power
Small Size    
Cost Optimized
Low Power
Small Size    
Cost Optimized
Low Power    
Cost Optimized
Low Power    
Cost Optimized
Low Power
Small Size    
Cost Optimized
Low Power
SDO
Small Size    
Low Power
Small Size    

Featured tools and software