HD3SS2522

Name: HD3SS2522
Brand: TI
SKU: HD3SS2522

AKTIV

MUX für USB 3.1 Type-C, 10 GBit/s mit DFP-Controller

Jetzt bestellen

Datenblatt

document-pdfAcrobat HD3SS2522 USB Type-C SS MUX with DFP Controller datasheet (Rev. B) (Englisch) PDF | HTML

HD3SS2522

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Type-C, USB3

USB speed (MBits)

10000

Type

Passive mux

Supply voltage (V)

3.3

Rating

Catalog

Operating temperature range (°C)

0 to 70

Function

Type-C, USB3

USB speed (MBits)

10000

Type

Passive mux

Supply voltage (V)

3.3

Rating

Catalog

Operating temperature range (°C)

0 to 70

WQFN (RHU)

56

55 mm² 11 x 5

Compliant to USB Type-C Specification 1.1
Mode Configuration
- Host Only – DFP
Channel Configuration (CC)
- Attach of USB Port Detection
- Cable Orientation Detection
- Type-C Current Mode (Default, Mid, High)
Supply Voltage 3.3 V ± 10%
2:1 Mux Solution for USB 3.1 Signaling
Operates up to 10 Gbps with Wide –3 dB BW of 8
GHz
Excellent Dynamic Characteristics at 2.5 GHz
- Crosstalk = –39 dB
- Off Isolation = –22 dB
- Insertion Loss = –1.2 dB
- Input Return Loss = –12 dB
Low Active (2 mW) and Standby Power (50 µW)
Consumption

Compliant to USB Type-C Specification 1.1
Mode Configuration
- Host Only – DFP
Channel Configuration (CC)
- Attach of USB Port Detection
- Cable Orientation Detection
- Type-C Current Mode (Default, Mid, High)
Supply Voltage 3.3 V ± 10%
2:1 Mux Solution for USB 3.1 Signaling
Operates up to 10 Gbps with Wide –3 dB BW of 8
GHz
Excellent Dynamic Characteristics at 2.5 GHz
- Crosstalk = –39 dB
- Off Isolation = –22 dB
- Insertion Loss = –1.2 dB
- Input Return Loss = –12 dB
Low Active (2 mW) and Standby Power (50 µW)
Consumption

HD3SS2522 is a 2:1 USB mux with Configuration Channel (CC) logic with Downstream Facing Port (DFP) support. The HD3SS2522 presents itself as a DFP according to the USB Type-C Spec. The CC logic block monitors the CC1 and CC2 pins voltages to determine when a USB port has been attached. Once a USB port has been attached, the CC logic also determines the orientation of the cable and configures the USB SS mux accordingly.

The HD3SS2522 provides an VBUS_EN signal to control legacy power switch to provide 5 V to VBUS. The device also provides control signals needed to support 5 V VCONN sourcing for ecosystems implementing USB Type-C.

Excellent dynamic characteristics of the device allow high speed switching with minimum attenuation to the signal eye diagram and little added jitter. The device also has low current consumption in Standby mode.

HD3SS2522 is a 2:1 USB mux with Configuration Channel (CC) logic with Downstream Facing Port (DFP) support. The HD3SS2522 presents itself as a DFP according to the USB Type-C Spec. The CC logic block monitors the CC1 and CC2 pins voltages to determine when a USB port has been attached. Once a USB port has been attached, the CC logic also determines the orientation of the cable and configures the USB SS mux accordingly.

The HD3SS2522 provides an VBUS_EN signal to control legacy power switch to provide 5 V to VBUS. The device also provides control signals needed to support 5 V VCONN sourcing for ecosystems implementing USB Type-C.

Excellent dynamic characteristics of the device allow high speed switching with minimum attenuation to the signal eye diagram and little added jitter. The device also has low current consumption in Standby mode.

open-in-new

Andere USB-Hubs und -Controller suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 3

	Typ	Titel		Datum
*	Data sheet	HD3SS2522 USB Type-C SS MUX with DFP Controller datasheet (Rev. B)	PDF \| HTML	25 Aug 2015
	Application note	Enabling USB Type-C downstream ports for USB3.1 and 3.2 Hubs		12 Dez 2019
	EVM User's guide	HD3SS2522EVM User's Guide (Rev. A)		25 Jun 2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

Optionen anzeigen

Referenzdesigns

TIDA-00624 — USB Typ-A auf USB Typ-C SS (SuperSpeed) MUX mit DFP-Controller – Referenzdesign

This addapter converts a USB standard host type-A port to Type-C DFP (downstream-facing port) with support for default, 1.5 A and 3.0A VBUS current levels. The TUSB2522 simplifies the design by integrating 2:1 USB 3.1 (up to 10 Gbps) mux with a DFP controller to monitor the Type-C configuration (...)

Test report: PDF

Schaltplan: PDF

Gehäuse	Pins	Herunterladen
WQFN (RHU)	56	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

HD3SS2522

MUX für USB 3.1 Type-C, 10 GBit/s mit DFP-Controller

HD3SS2522

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TIDA-00624 — USB Typ-A auf USB Typ-C SS (SuperSpeed) MUX mit DFP-Controller – Referenzdesign

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos