Codebeispiel oder Demo
LMT01
2-Draht-Temperatursensor mit ±0,5 °C Genauigkeit und Impulszähler-Schnittstelle
Datenblatt
LMT01
- High Accuracy Over –50°C to 150°C Wide Temperature Range
- –20°C to 90°C: ±0.5°C (Maximum)
- 90°C to 150°C: ±0.625°C (Maximum)
- –50°C to –20°C: ±0.7°C (Maximum)
- Precision Digital Temperature Measurement Simplified in a 2-Pin Package
- Pulse Count Current Loop Easily Read by Processor. Number of Output Pulses is Proportional to Temperature With 0.0625°C Resolution
- Communication Frequency: 88 kHz
- Conversion Current: 34 µA
- Continuous Conversion Plus Data-Transmission Period: 100 ms
- Floating 2-V to 5.5-V (VP–VN) Supply Operation With Integrated EMI Immunity
- Multiple 2-Pin Package Offerings: TO-92/LPG (3.1 mm × 4 mm × 1.5 mm) – ½ the Size of Traditional TO-92 and WSON With Wettable Flanks
The LMT01 device is a high-accuracy, 2-pin temperature sensor with an easy-to-use pulse count current loop interface, which makes it suitable for onboard and offboard applications in automotive, industrial, and consumer markets. The LMT01 digital pulse count output and high accuracy over a wide temperature range allow pairing with any MCU without concern for integrated ADC quality or availability, while minimizing software overhead. TI’s LMT01 device achieves a maximum ±0.5°C accuracy with very fine resolution (0.0625°C) over a temperature range of –20°C to 90°C without system calibration or hardware and software compensation.
The LMT01’s pulse count interface is designed to directly interface with a GPIO or comparator input, thereby simplifying hardware implementation. Similarly, the LMT01’s integrated EMI suppression and simple 2-pin architecture makes it suitable for onboard and offboard temperature sensing in a noisy environment. The LMT01 device can be easily converted into a two-wire temperature probe with a wire length up to two meters. See LMT01-Q1 for the automotive qualified version.
![„Informationen“](„https://www.ti.com/content/dam/ticom/images/icons/illustrative-icons/resources/information-icon.png"){kind=icon}
Weitere Informationen anfordern
Dokumentation zur NIST-Kalibrierung ist verfügbar. Jetzt anfordern
Technische Dokumentation
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5 | Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | LMT01 0.5°C Accurate 2-Pin Digital Output Temperature Sensor With Pulse Count Interface datasheet (Rev. D) | PDF | HTML | 01 Jun 2018 |
| Application note | Temperature sensors: PCB guidelines for surface mount devices (Rev. A) | 18 Jan 2019 | ||
| Technical article | How to select a temperature sensor probe | PDF | HTML | 18 Feb 2016 | |
| EVM User's guide | LMT01EVM User's Guide (Rev. A) | 16 Okt 2015 | ||
| EVM User's guide | LMT01EVM User's Guide | 19 Mär 2015 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
Evaluierungsplatine
LMT01EVM — LMT01-Evaluierungsmodul
The LMT01EVM allows users to evaluate the performance of the LMT01 2-pin digital temperature sensor. The EVM comes in a USB stick form factor package with an onboard MSP430F5528 microcontroller that interfaces with the host computer's USB port and the LMT01 device. The EVM features perforated (...)
Benutzerhandbuch: PDF
Firmware
SNIC013 — LMT01EVM Firmware Source v1.21
GUI für Evaluierungsmodul (EVM)
SNIC011 — LMT01EVM GUI v1.12.0.0
Referenzdesigns
TIDA-00779 — 230 V, 3,5 kW-PFC mit >98 % Wirkungsgrad, optimiert für Stückzahl und Größe – Referenzdesign
The TIDA-00779 is a 3.5-kw, cost competitive power factor regulator converter designed for room air-conditioner and other major appliances. This reference design is a continuous-conduction-mode (CCM) boost converter implemented using TI’s UCC28180 PFC controller provided with all of the (...)
Referenzdesigns
TIDA-00765 — 1 g-Auflösung über 15 kg-Bereich. Sub-100 nVpp-Rauschen-Frontend – Referenzdesign
TIDA-00765 is a less than 100nVpp analog front end for resistive strain gauge bridge load cell-based weight and vibration measurement. It is ideally suited for appliances, which require high-resolution due to large dynamic range or have considerable weight offset. In the face of significant levels (...)
Referenzdesigns
TIDA-01469 — Motorüberwachung mit drahtlosem Vibrationssensor – Referenzdesign für vorbeugende Wartung
This reference design is a low-power wireless subsystem solution that monitors motors using vibration sensing to determine if preventative maintenance is necessary. An FFT of the vibration data can be sent out to another device using either Bluetooth low energy or sub-1GHz wireless protocols. The (...)
Referenzdesigns
TIDA-00449 — Überwachung, Ausgleich und umfassender Schutz von Akkus mit 10 Zellen. Referenzdesign für 50-A-Entla
This reference design is ready tested for 10 cells in series battery pack monitoring, balancing and protection for power tools. Power tools increasingly use highly power-dense Li-Ion or Li-Iron phosphate cells based battery packs that need to be protected from explosion due to incorrect charging or (...)
Referenzdesigns
TIDA-010019 — Referenzdesign für RTD-Ersatz für Vergleichsstellenmessung in einem Temperatursensor
Temperature-sensing applications that use a thermocouple (TC) require an accurate local temperature sensor to achieve high accuracy. Solutions for design challenges such as cold-junction compensation (CJC) or including an ultra-low power TC analog front-end are highlighted and addressed in this (...)
Referenzdesigns
TIDA-00550 — Referenzdesign eines Zweikanal-Analogeingangsmoduls mit Kanalisolierung für SPS
TIDA-00550, a dual channel-to-channel isolated universal analog input module reference design for programmable logic controllers (PLCs), combines precision and flexibility. This reference design, used in conjunction with sensor transmitters, can measure standard input voltages and currents as (...)
Referenzdesigns
TIDA-00752 — Referenzdesign für galvanisch getrennten IC-Temperatursensor mit 2-Draht-Technik, Impulszähler-Schni
In order to provide system designers a new cost-effective and easy alternative to assured precision temperature measurement, this reference design discusses the new tiny 2-pin digital output IC temperature sensor with single wire pulse count interface that enhances reliability and greatly (...)
| Gehäuse | Pins | Herunterladen |
|---|---|---|
| TO-92 (LPG) | 2 | Optionen anzeigen |
| WSON (DQX) | 2 | Optionen anzeigen |
Bestellen & Qualität
Beinhaltete Information:
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.