Startseite Mikrocontroller (MCUs) & Prozessoren ARM-basierte Prozessoren
Startseite
Mikrocontroller (MCUs) & Prozessoren
ARM-basierte Prozessoren

OMAPL137-HT

AKTIV

C674x Fließkomma-DSP mit geringem Stromverbrauch und Arm-Prozessor für hohe Temperaturen – bis zu 45

Jetzt bestellen
Datenblatt
Fehlerverzeichnis

OMAPL137-HT

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Arm CPU 1 Arm9 Arm (max) (MHz) 300 Coprocessors C674x DSP CPU 32-bit Display type 1 LCD Protocols Ethernet Ethernet MAC 1-Port 10/100 Hardware accelerators PRUSS Operating system Linux, RTOS Security Device identity, Memory protection Rating High Temp Power supply solution TPS65910 Operating temperature range (°C) -55 to 175
Arm CPU 1 Arm9 Arm (max) (MHz) 300 Coprocessors C674x DSP CPU 32-bit Display type 1 LCD Protocols Ethernet Ethernet MAC 1-Port 10/100 Hardware accelerators PRUSS Operating system Linux, RTOS Security Device identity, Memory protection Rating High Temp Power supply solution TPS65910 Operating temperature range (°C) -55 to 175
DIESALE (KGD) — See data sheet HLQFP (PTP) 176 676 mm² 26 x 26
  • Highlights
    • Dual Core SoC300-MHz ARM926EJ-S RISC MPU300-MHz C674x™ VLIW DSP
    • TMS320C674x Fixed/Floating-Point VLIW DSP Core
    • Enhanced Direct-Memory-Access Controller 3 (EDMA3)
    • 128K-Byte RAM Shared Memory
    • Two External Memory Interfaces
    • Two External Memory Interfaces Modules
    • LCD Controller
    • Two Serial Peripheral Interfaces (SPI)
    • Multimedia Card (MMC)/Secure Digital (SD)
    • Two Master/Slave Inter-Integrated Circuit
    • One Host-Port Interface (HPI)
    • USB 1.1 OHCI (Host) With Integrated PHY (USB1)
  • Applications
    • Industrial Diagnostics
    • Test and measurement
    • Military Sonar/Radar
    • Medical measurement
    • Professional Audio
    • Down Hole Industry
  • Software Support
    • TI DSP/BIOS
    • Chip Support Library and DSP Library
  • ARM926EJ-S Core
    • 32-Bit and 16-Bit (Thumb®) Instructions
    • DSP Instruction Extensions
    • Single Cycle MAC
    • ARM Jazelle Technology
    • EmbeddedICE-RT for Real-Time Debug
  • ARM9 Memory Architecture
  • C674x Instruction Set Features
    • Superset of the C67x+ and C64x+ ISAs
    • Up to 3648/2736 C674x MIPS/MFLOPS
    • Byte-Addressable (8-/16-/32-/64-Bit Data)
    • 8-Bit Overflow Protection
    • Bit-Field Extract, Set, Clear
    • Normalization, Saturation, Bit-Counting
    • Compact 16-Bit Instructions
  • C674x Two Level Cache Memory Architecture
    • 32K-Byte L1P Program RAM/Cache
    • 32K-Byte L1D Data RAM/Cache
    • 256K-Byte L2 Unified Mapped RAM/Cache
    • Flexible RAM/Cache Partition (L1 and L2)
    • 1024KB L2 ROM
  • Enhanced Direct-Memory-Access Controller 3 (EDMA3):
    • 2 Transfer Controllers
    • 32 Independent DMA Channels
    • 8 Quick DMA Channels
    • Programmable Transfer Burst Size
  • TMS320C674x™ Fixed/Floating-Point VLIW DSP Core
    • Load-Store Architecture With Non-Aligned Support
    • 64 General-Purpose Registers (32 Bit)
    • Six ALU (32-/40-Bit) Functional Units
      • Supports 32-Bit Integer, SP (IEEE Single Precision/32-Bit) and
        DP (IEEE Double Precision/64-Bit) Floating Point
      • Supports up to Four SP Additions Per Clock, Four DP Additions
        Every 2 Clocks
      • Supports up to Two Floating Point (SP or DP) Approximate Reciprocal
        or Square Root Operations Per Cycle
    • Two Multiply Functional Units
      • Mixed-Precision IEEE Floating Point Multiply Supported up to:
        • 2 SP × SP > SP Per Clock
        • 2 SP × SP > DP Every Two Clocks
        • 2 SP × DP > DP Every Three Clocks
        • 2 DP × DP > DP Every Four Clocks
        • Fixed Point Multiply Supports Two 32 × 32-Bit Multiplies,
          Four 16 × 16-Bit Multiplies, or Eight 8 × 8-Bit Multiplies
          per Clock Cycle, and Complex Multiples
      • Instruction Packing Reduces Code Size
      • All Instructions Conditional
      • Hardware Support for Modulo Loop Operation
      • Protected Mode Operation
      • Exceptions Support for Error Detection and Program Redirection
    • 128K-Byte RAM Shared Memory
    • 3.3V LVCMOS IOs (except for USB interfaces)
    • Two External Memory Interfaces:
      • EMIFA
        • NOR (8-/16-Bit-Wide Data)
        • NAND (8-/16-Bit-Wide Data)
        • 16-Bit SDRAM With 128MB Address Space
      • EMIFB
        • 32-Bit or 16-Bit SDRAM With 256MB Address Space
    • Three Configurable 16550 type UART Modules:
      • UART0 With Modem Control Signals
      • Autoflow control signals (CTS, RTS) on UART0 only
      • 16-byte FIFO
      • 16x or 13x Oversampling Option
    • LCD Controller
    • Two Serial Peripheral Interfaces (SPI) Each With One Chip-Select
    • Multimedia Card (MMC)/Secure Digital (SD) Card Interface with Secure Data I/O (SDIO)
    • Two Master/Slave Inter-Integrated Circuit (I2CBus™)
    • One Host-Port Interface (HPI) With 16-Bit-Wide Muxed Address/Data Bus For High Bandwidth
    • Programmable Real-Time Unit Subsystem (PRUSS)
      • Two Independent Programmable Realtime Unit (PRU) Cores
        • 32-Bit Load/Store RISC architecture
        • 4K Byte instruction RAM per core
        • 512 Bytes data RAM per core
        • PRU Subsystem (PRUSS) can be disabled via software to save power
      • Standard Power Management Mechanism
        • Clock Gating
        • Entire Subsystem Under a Single PSC Clock Gating Domain
        • Dedicated Interrupt Controller
        • Dedicated Switched Central Resource
      • USB 1.1 OHCI (Host) With Integrated PHY (USB1)
      • USB 2.0 OTG Port With Integrated PHY (USB0):
        • USB 2.0 High-/Full-Speed Client
        • USB 2.0 High-/Full-/Low-Speed Host
        • End Point 0 (Control)
        • End Points 1,2,3,4 (Control, Bulk, Interrupt or ISOC) Rx and Tx
      • Three Multichannel Audio Serial Ports:
        • Six Clock Zones and 28 Serial Data Pins
        • Supports TDM, I2S, and Similar Formats
        • DIT-Capable (McASP2)
        • FIFO buffers for Transmit and Receive
      • 10/100 Mb/s Ethernet MAC (EMAC):
        • IEEE 802.3 Compliant (3.3-V I/O Only)
        • RMII Media Independent Interface
        • Management Data I/O (MDIO) Module
      • Real-Time Clock With 32 KHz Oscillator and Separate Power Rail
      • Crystal oscillators not validated beyond 125°C. Recommend use of external oscillator.
      • One 64-Bit General-Purpose Timer (Configurable as Two 32-Bit Timers)
      • One 64-Bit General-Purpose Timer/Watchdog Timer (Configurable as Two 32-bit
        General-Purpose Timers)
      • Three Enhanced Pulse Width Modulators (eHRPWM):
        • Dedicated 16-Bit Time-Base Counter With Period And Frequency Control
        • 6 Single Edge, 6 Dual Edge Symmetric or 3 Dual Edge Asymmetric Outputs
        • Dead-Band Generation
        • PWM Chopping by High-Frequency Carrier
        • Trip Zone Input
      • Three 32-Bit Enhanced Capture Modules (eCAP):
        • Configurable as 3 Capture Inputs or 3 Auxiliary Pulse Width Modulator (APWM) outputs
        • Single Shot Capture of up to Four Event Time-Stamps
      • Two 32-Bit Enhanced Quadrature Encoder Pulse Modules (eQEP)
      • 176-pin PowerPADTM Plastic Quad Flat Pack [PTP suffix], 0.5-mm Pin Pitch
      • High Temperature (175°C) Application
      • Texas Instruments High Temperature Products Use Highly Optimized Silicon Solutions with
        Design and Process Enhancements to Maximize Performance over Extended Temperatures.
        All Devices are Characterized and Qualified for 1000 Hours Continuous Operating Life
        at Maximum Rated Temperature
      • Community Resources
        • TI E2E Community
        • TI Embedded Processors Wiki
  • Highlights
    • Dual Core SoC300-MHz ARM926EJ-S RISC MPU300-MHz C674x™ VLIW DSP
    • TMS320C674x Fixed/Floating-Point VLIW DSP Core
    • Enhanced Direct-Memory-Access Controller 3 (EDMA3)
    • 128K-Byte RAM Shared Memory
    • Two External Memory Interfaces
    • Two External Memory Interfaces Modules
    • LCD Controller
    • Two Serial Peripheral Interfaces (SPI)
    • Multimedia Card (MMC)/Secure Digital (SD)
    • Two Master/Slave Inter-Integrated Circuit
    • One Host-Port Interface (HPI)
    • USB 1.1 OHCI (Host) With Integrated PHY (USB1)
  • Applications
    • Industrial Diagnostics
    • Test and measurement
    • Military Sonar/Radar
    • Medical measurement
    • Professional Audio
    • Down Hole Industry
  • Software Support
    • TI DSP/BIOS
    • Chip Support Library and DSP Library
  • ARM926EJ-S Core
    • 32-Bit and 16-Bit (Thumb®) Instructions
    • DSP Instruction Extensions
    • Single Cycle MAC
    • ARM Jazelle Technology
    • EmbeddedICE-RT for Real-Time Debug
  • ARM9 Memory Architecture
  • C674x Instruction Set Features
    • Superset of the C67x+ and C64x+ ISAs
    • Up to 3648/2736 C674x MIPS/MFLOPS
    • Byte-Addressable (8-/16-/32-/64-Bit Data)
    • 8-Bit Overflow Protection
    • Bit-Field Extract, Set, Clear
    • Normalization, Saturation, Bit-Counting
    • Compact 16-Bit Instructions
  • C674x Two Level Cache Memory Architecture
    • 32K-Byte L1P Program RAM/Cache
    • 32K-Byte L1D Data RAM/Cache
    • 256K-Byte L2 Unified Mapped RAM/Cache
    • Flexible RAM/Cache Partition (L1 and L2)
    • 1024KB L2 ROM
  • Enhanced Direct-Memory-Access Controller 3 (EDMA3):
    • 2 Transfer Controllers
    • 32 Independent DMA Channels
    • 8 Quick DMA Channels
    • Programmable Transfer Burst Size
  • TMS320C674x™ Fixed/Floating-Point VLIW DSP Core
    • Load-Store Architecture With Non-Aligned Support
    • 64 General-Purpose Registers (32 Bit)
    • Six ALU (32-/40-Bit) Functional Units
      • Supports 32-Bit Integer, SP (IEEE Single Precision/32-Bit) and
        DP (IEEE Double Precision/64-Bit) Floating Point
      • Supports up to Four SP Additions Per Clock, Four DP Additions
        Every 2 Clocks
      • Supports up to Two Floating Point (SP or DP) Approximate Reciprocal
        or Square Root Operations Per Cycle
    • Two Multiply Functional Units
      • Mixed-Precision IEEE Floating Point Multiply Supported up to:
        • 2 SP × SP > SP Per Clock
        • 2 SP × SP > DP Every Two Clocks
        • 2 SP × DP > DP Every Three Clocks
        • 2 DP × DP > DP Every Four Clocks
        • Fixed Point Multiply Supports Two 32 × 32-Bit Multiplies,
          Four 16 × 16-Bit Multiplies, or Eight 8 × 8-Bit Multiplies
          per Clock Cycle, and Complex Multiples
      • Instruction Packing Reduces Code Size
      • All Instructions Conditional
      • Hardware Support for Modulo Loop Operation
      • Protected Mode Operation
      • Exceptions Support for Error Detection and Program Redirection
    • 128K-Byte RAM Shared Memory
    • 3.3V LVCMOS IOs (except for USB interfaces)
    • Two External Memory Interfaces:
      • EMIFA
        • NOR (8-/16-Bit-Wide Data)
        • NAND (8-/16-Bit-Wide Data)
        • 16-Bit SDRAM With 128MB Address Space
      • EMIFB
        • 32-Bit or 16-Bit SDRAM With 256MB Address Space
    • Three Configurable 16550 type UART Modules:
      • UART0 With Modem Control Signals
      • Autoflow control signals (CTS, RTS) on UART0 only
      • 16-byte FIFO
      • 16x or 13x Oversampling Option
    • LCD Controller
    • Two Serial Peripheral Interfaces (SPI) Each With One Chip-Select
    • Multimedia Card (MMC)/Secure Digital (SD) Card Interface with Secure Data I/O (SDIO)
    • Two Master/Slave Inter-Integrated Circuit (I2CBus™)
    • One Host-Port Interface (HPI) With 16-Bit-Wide Muxed Address/Data Bus For High Bandwidth
    • Programmable Real-Time Unit Subsystem (PRUSS)
      • Two Independent Programmable Realtime Unit (PRU) Cores
        • 32-Bit Load/Store RISC architecture
        • 4K Byte instruction RAM per core
        • 512 Bytes data RAM per core
        • PRU Subsystem (PRUSS) can be disabled via software to save power
      • Standard Power Management Mechanism
        • Clock Gating
        • Entire Subsystem Under a Single PSC Clock Gating Domain
        • Dedicated Interrupt Controller
        • Dedicated Switched Central Resource
      • USB 1.1 OHCI (Host) With Integrated PHY (USB1)
      • USB 2.0 OTG Port With Integrated PHY (USB0):
        • USB 2.0 High-/Full-Speed Client
        • USB 2.0 High-/Full-/Low-Speed Host
        • End Point 0 (Control)
        • End Points 1,2,3,4 (Control, Bulk, Interrupt or ISOC) Rx and Tx
      • Three Multichannel Audio Serial Ports:
        • Six Clock Zones and 28 Serial Data Pins
        • Supports TDM, I2S, and Similar Formats
        • DIT-Capable (McASP2)
        • FIFO buffers for Transmit and Receive
      • 10/100 Mb/s Ethernet MAC (EMAC):
        • IEEE 802.3 Compliant (3.3-V I/O Only)
        • RMII Media Independent Interface
        • Management Data I/O (MDIO) Module
      • Real-Time Clock With 32 KHz Oscillator and Separate Power Rail
      • Crystal oscillators not validated beyond 125°C. Recommend use of external oscillator.
      • One 64-Bit General-Purpose Timer (Configurable as Two 32-Bit Timers)
      • One 64-Bit General-Purpose Timer/Watchdog Timer (Configurable as Two 32-bit
        General-Purpose Timers)
      • Three Enhanced Pulse Width Modulators (eHRPWM):
        • Dedicated 16-Bit Time-Base Counter With Period And Frequency Control
        • 6 Single Edge, 6 Dual Edge Symmetric or 3 Dual Edge Asymmetric Outputs
        • Dead-Band Generation
        • PWM Chopping by High-Frequency Carrier
        • Trip Zone Input
      • Three 32-Bit Enhanced Capture Modules (eCAP):
        • Configurable as 3 Capture Inputs or 3 Auxiliary Pulse Width Modulator (APWM) outputs
        • Single Shot Capture of up to Four Event Time-Stamps
      • Two 32-Bit Enhanced Quadrature Encoder Pulse Modules (eQEP)
      • 176-pin PowerPADTM Plastic Quad Flat Pack [PTP suffix], 0.5-mm Pin Pitch
      • High Temperature (175°C) Application
      • Texas Instruments High Temperature Products Use Highly Optimized Silicon Solutions with
        Design and Process Enhancements to Maximize Performance over Extended Temperatures.
        All Devices are Characterized and Qualified for 1000 Hours Continuous Operating Life
        at Maximum Rated Temperature
      • Community Resources
        • TI E2E Community
        • TI Embedded Processors Wiki

The OMAPL137 is a low-power applications processor based on an ARM926EJ-S and a C674x DSP core. It consumes significantly lower power than other members of the TMS320C6000 platform of DSPs.

The OMAPL137 enables OEMs and ODMs to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.

The dual-core architecture of the OMAPL137 provides benefits of both DSP and Reduced Instruction Set Computer (RISC) technologies, incorporating a high-performance TMS320C674x DSP core and an ARM926EJ-S core.

The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.

The ARM core has a coprocessor 15 (CP15), protection module, and Data and program Memory Management Units (MMUs) with table look-aside buffers. It has separate 16K-byte instruction and 16Kbyte data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has a 8KB RAM (Vector Table) and 64KB ROM.

The OMAPL137 DSP core uses a two-level cache-based architecture. The Level 1 program cache (L1P) is a 32KB direct mapped cache and the Level 1 data cache (L1D) is a 32KB 2-way set-associative cache. The Level 2 program cache (L2P) consists of a 256KB memory space that is shared between program and data space. L2 memory can be configured as mapped memory, cache, or combinations of the two. Although the DSP L2 is accessible by ARM and other hosts in the system, an additional 128KB RAM shared memory is available for use by other hosts without affecting DSP performance.

The peripheral set includes: a 10/100 Mb/s Ethernet MAC (EMAC) with a Management Data Input/Output (MDIO) module; two inter-integrated circuit (I2C) bus interfaces; 3 multichannel audio serial ports (McASP) with 16/12/4 serializers and FIFO buffers; 2 64-bit general-purpose timers each configurable (one configurable as watchdog); a configurable 16-bit host port interface (HPI) ; up to 8 banks of 16 pins of general-purpose input/output (GPIO) with programmable interrupt/event generation modes, multiplexed with other peripherals; 3 UART interfaces (one with RTS and CTS); 3 enhanced high-resolution pulse width modulator (eHRPWM) peripherals; 3 32-bit enhanced capture (eCAP) module peripherals which can be configured as 3 capture inputs or 3 auxiliary pulse width modulator (APWM) outputs; 2 32-bit enhanced quadrature pulse (eQEP) peripherals; and 2 external memory interfaces: an asynchronous and SDRAM external memory interface (EMIFA) for slower memories or peripherals, and a higher speed memory interface (EMIFB) for SDRAM.

The Ethernet Media Access Controller (EMAC) provides an efficient interface between the OMAP-L137 and the network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbits/second (Mbps) and 100 Mbps in either half- or full-duplex mode. Additionally an Management Data Input/Output (MDIO) interface is available for PHY configuration.

The HPI, I2C, SPI, USB1.1 and USB2.0 ports allow the device to easily control peripheral devices and/or communicate with host processors.

The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections later in this document and the associated peripheral reference guides.

The device has a complete set of development tools for both the ARM and DSP. These include C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a Windows® debugger interface for visibility into source code execution.

The OMAPL137 is a low-power applications processor based on an ARM926EJ-S and a C674x DSP core. It consumes significantly lower power than other members of the TMS320C6000 platform of DSPs.

The OMAPL137 enables OEMs and ODMs to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.

The dual-core architecture of the OMAPL137 provides benefits of both DSP and Reduced Instruction Set Computer (RISC) technologies, incorporating a high-performance TMS320C674x DSP core and an ARM926EJ-S core.

The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.

The ARM core has a coprocessor 15 (CP15), protection module, and Data and program Memory Management Units (MMUs) with table look-aside buffers. It has separate 16K-byte instruction and 16Kbyte data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has a 8KB RAM (Vector Table) and 64KB ROM.

The OMAPL137 DSP core uses a two-level cache-based architecture. The Level 1 program cache (L1P) is a 32KB direct mapped cache and the Level 1 data cache (L1D) is a 32KB 2-way set-associative cache. The Level 2 program cache (L2P) consists of a 256KB memory space that is shared between program and data space. L2 memory can be configured as mapped memory, cache, or combinations of the two. Although the DSP L2 is accessible by ARM and other hosts in the system, an additional 128KB RAM shared memory is available for use by other hosts without affecting DSP performance.

The peripheral set includes: a 10/100 Mb/s Ethernet MAC (EMAC) with a Management Data Input/Output (MDIO) module; two inter-integrated circuit (I2C) bus interfaces; 3 multichannel audio serial ports (McASP) with 16/12/4 serializers and FIFO buffers; 2 64-bit general-purpose timers each configurable (one configurable as watchdog); a configurable 16-bit host port interface (HPI) ; up to 8 banks of 16 pins of general-purpose input/output (GPIO) with programmable interrupt/event generation modes, multiplexed with other peripherals; 3 UART interfaces (one with RTS and CTS); 3 enhanced high-resolution pulse width modulator (eHRPWM) peripherals; 3 32-bit enhanced capture (eCAP) module peripherals which can be configured as 3 capture inputs or 3 auxiliary pulse width modulator (APWM) outputs; 2 32-bit enhanced quadrature pulse (eQEP) peripherals; and 2 external memory interfaces: an asynchronous and SDRAM external memory interface (EMIFA) for slower memories or peripherals, and a higher speed memory interface (EMIFB) for SDRAM.

The Ethernet Media Access Controller (EMAC) provides an efficient interface between the OMAP-L137 and the network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbits/second (Mbps) and 100 Mbps in either half- or full-duplex mode. Additionally an Management Data Input/Output (MDIO) interface is available for PHY configuration.

The HPI, I2C, SPI, USB1.1 and USB2.0 ports allow the device to easily control peripheral devices and/or communicate with host processors.

The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections later in this document and the associated peripheral reference guides.

The device has a complete set of development tools for both the ARM and DSP. These include C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a Windows® debugger interface for visibility into source code execution.
open-in-new Andere ARM-basierte Prozessoren suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Typ Titel Datum
* Data sheet Low-Power Applications Processor datasheet (Rev. B) 08 Feb 2013
* Errata OMAP-L137 C6000 DSP+ARM Processor Errata (Silicon Revs 3.0, 2.1, 2.0, 1.1 & 1.0) (Rev. I) 17 Jun 2014
* Radiation & reliability report OMAPL137PTPH Reliability Report (Rev. A) 17 Aug 2012
Application note Processor SDK RTOS Audio Benchmark Starter Kit 12 Apr 2017
User guide OMAP-L137 C6000 DSP+ARM Processor Technical Reference Manual (Rev. D) 21 Sep 2016
Application note Introduction to TMS320C6000 DSP Optimization 06 Okt 2011
White paper Software and Hardware Design Challenges Due to Dynamic Raw NAND Market 19 Mai 2011

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Debug-Tastkopf

TMDSEMU200-U — XDS200-USB-Debug-Tastkopf

Die XDS200 ist eine Debug-Sonde (Emulator) zum Debuggen von Embedded-Bausteinen von TI. Die XDS200 bietet ein ausgewogenes Preis-Leistungsverhältnis im Vergleich zum preiswerten XDS110 und dem leistungsstarken XDS560v2 und unterstützt zahlreiche Standards (IEEE1149,1, IEEE1149,7, SWD) in einem (...)

Nicht verfügbar auf TI.com
Debug-Tastkopf

TMDSEMU560V2STM-U — XDS560v2 System-Trace-USB-Debug-Tastkopf

Der XDS560v2 ist die leistungsstärkste Debug-Sonde aus der XDS560™ Familie von Debug-Sonden und unterstützt sowohl den traditionellen JTAG-Standard (IEEE1149.1) als auch cJTAG (IEEE1149.7).  Bitte beachten: Diese Lösung unterstützt kein Serial Wire Debug (SWD).

Alle XDS-Debug-Tastköpfe unterstützen (...)

Nicht verfügbar auf TI.com
Debug-Tastkopf

TMDSEMU560V2STM-UE — XDS560v2 System-Trace-USB-und Ethernet-Debug-Tastkopf

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

Nicht verfügbar auf TI.com
Treiber oder Bibliothek

C64X-DSPLIB — Download TMS320C64x DSP Library

TMS320C6000 Digital Signal Processor Library (DSPLIB) is a platform-optimized DSP function library for C programmers. It includes C-callable, general-purpose signal-processing routines that are typically used in computationally intensive real-time applications. With these routines, higher (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
ARM-basierte Prozessoren
OMAPL137-HT — C674x Fließkomma-DSP mit geringem Stromverbrauch und Arm-Prozessor für hohe Temperaturen – bis zu 45 OMAPL138B-EP — Optimiertes Produkt energieeffizienter C674x-Fließkomma-DSP + ARM9-Prozessor – 345 MHz TMS320DM8127 — DaVinci Digital-Media-Prozessor
Digitale Signalprozessoren (DSPs)
SM320C6201-EP — Optimierter Festkomma-DSP C6201 SM320C6415 — C64x Festkomma-DSP der Militärklasse SM320C6415-EP — Optimierter Festkomma-DSP C6415 SM320C6424-EP — Verbessertes Produkt, C6424 Festkomma-DSP SM320C6455-EP — Verbessertes Produkt, C6455 Festkomma-DSP SM320C6472-HIREL — Hochzuverlässiger 6 Core C6472 Festkomma-DSP SM320C6678-HIREL — Hochzuverlässiges Produkt mit hoher Leistung, 8-Kern-C6678 Fest- und Gleitkomma-DSP SM320C6701 — Single-Core-C67x-Fließkomma-DSP für militärische Anwendungen – bis zu 167 MHz SM320C6701-EP — Verbessertes Produkt – C6701 Fließkomma-DSP SM320C6711D-EP — Verbessertes Produkt – C6711D Fließkomma-DSP SM320C6712D-EP — Verbessertes Produkt– C6712D-DSP SM320C6713B-EP — Verbessertes Produkt – C6713-Fließkomma-DSP SM320C6727B — Militärtauglicher C6727B-Gleitkomma-DSP SM320C6727B-EP — Verbessertes Produkt – C6727-Fließkomma-DSP SM320DM642-HIREL — Hochzuverlässiger Digital-Media-DM642-DSP SM32C6416T-EP — Verbessertes Produkt, C6416T Festkomma-DSP SMJ320C6201B — Digitaler Festkomma-Signalprozessor, Militäranwendungen SMJ320C6203 — C62x Festkomma-DSP in militärischer Qualität – Keramikgehäuse SMJ320C6415 — C64x Festkomma-DSP in militärischer Qualität – Keramikgehäuse SMJ320C6701 — C67x-Fließkomma-DSP in Militärqualität – Keramikgehäuse SMJ320C6701-SP — Weltraumtauglicher C6701-Fließkomma-DSP – strahlungstolerant, Klasse V mit Keramikgehäuse SMV320C6727B-SP — Raumfahrttauglicher C6727B Gleitkomma-DSP – strahlungstolerant, Klasse V mit Keramikgehäuse TMS320C6201 — Digitaler Festkomma-Signalprozessor TMS320C6202 — Digitaler Festkomma-Signalprozessor TMS320C6202B — C62x Festkomma-DSP – bis zu 300 MHz, 384 KB TMS320C6203B — C62x Festkomma-DSP – bis zu 300 MHz, 896 KB TMS320C6204 — Digitaler Festkomma-Signalprozessor TMS320C6205 — Digitaler Festkomma-Signalprozessor TMS320C6211B — C62x Festkomma-DSP – bis zu 167MHz TMS320C6421Q — C64x+ Festkomma-DSP – bis zu 600 MHz, 8 Bit EMIFA, 16-Bit DDR2 TMS320C6424Q — C64x+ Festkomma-DSP – bis zu 600 MHz, 16/8-Bit EMIFA, 32/16 Bit DDR2 TMS320C6452 — C64x+ Festkomma-DSP – bis zu 900 MHz, 1 Gbps-Ethernet TMS320C6454 — C64x+ Festkomma-DSP – bis zu 1 GHz, 64 Bit EMIFA, 32/16 Bit DDR2, 1 Gbps, Ethernet TMS320C6455 — C64x+ Festkomma-DSP – bis zu 1,2 GHz, 64-Bit EMIFA, 32/16 Bit DDR2, 1 Gbps-Ethernet TMS320C6457 — Digitaler Signalprozessor für die Kommunikationsinfrastruktur TMS320C6701 — C67x Fließkomma-DSP – bis zu 167MHz, McBSP TMS320C6711D — C67x-Fließkomma-DSP – bis zu 250 MHz, McBSP, 32-Bit-EMIFA TMS320C6712D — C67x Fließkomma-DSP – bis zu 150MHz, McBSP, 16-Bit EMIFA TMS320C6720 — C67x Fließkomma-DSP – 200 MHz, McASP, 16-Bit-EMIFA TMS320C6722B — C67x Fließkomma-DSP – bis zu 250 MHz, McASP, 16-Bit-EMIFA TMS320C6726B — C67x Fließkomma-DSP – bis zu 266 MHz, McASP, 16-Bit-EMIFA TMS320C6727 — C67x Fließkomma-DSP – bis zu 250MHz, McASP, 32-Bit-EMIFA TMS320C6727B — C67x Fließkomma-DSP – bis zu 350 MHz, McASP, 32-Bit-EMIFA TMS320C6743 — Energieeffizienter C674x-Fließkomma-DSP – 375 MHz TMS320C6745 — C674x Fließkomma-DSP mit geringem Stromverbrauch – 456MHz, QFP TMS320C6747 — C674x Fließkomma-DSP mit geringem Stromverbrauch – 456 MHz, PBGA
Herunterladen
Treiber oder Bibliothek

C67X-DSPLIB — Download TMS320C67x DSP Library

TMS320C6000 Digital Signal Processor Library (DSPLIB) is a platform-optimized DSP function library for C programmers. It includes C-callable, general-purpose signal-processing routines that are typically used in computationally intensive real-time applications. With these routines, higher (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
ARM-basierte Prozessoren
OMAPL137-HT — C674x Fließkomma-DSP mit geringem Stromverbrauch und Arm-Prozessor für hohe Temperaturen – bis zu 45 OMAPL138B-EP — Optimiertes Produkt energieeffizienter C674x-Fließkomma-DSP + ARM9-Prozessor – 345 MHz TMS320DM8127 — DaVinci Digital-Media-Prozessor
Digitale Signalprozessoren (DSPs)
SM320C6201-EP — Optimierter Festkomma-DSP C6201 SM320C6415 — C64x Festkomma-DSP der Militärklasse SM320C6415-EP — Optimierter Festkomma-DSP C6415 SM320C6424-EP — Verbessertes Produkt, C6424 Festkomma-DSP SM320C6455-EP — Verbessertes Produkt, C6455 Festkomma-DSP SM320C6472-HIREL — Hochzuverlässiger 6 Core C6472 Festkomma-DSP SM320C6678-HIREL — Hochzuverlässiges Produkt mit hoher Leistung, 8-Kern-C6678 Fest- und Gleitkomma-DSP SM320C6701 — Single-Core-C67x-Fließkomma-DSP für militärische Anwendungen – bis zu 167 MHz SM320C6701-EP — Verbessertes Produkt – C6701 Fließkomma-DSP SM320C6711D-EP — Verbessertes Produkt – C6711D Fließkomma-DSP SM320C6712D-EP — Verbessertes Produkt– C6712D-DSP SM320C6713B-EP — Verbessertes Produkt – C6713-Fließkomma-DSP SM320C6727B — Militärtauglicher C6727B-Gleitkomma-DSP SM320C6727B-EP — Verbessertes Produkt – C6727-Fließkomma-DSP SM320DM642-HIREL — Hochzuverlässiger Digital-Media-DM642-DSP SM32C6416T-EP — Verbessertes Produkt, C6416T Festkomma-DSP SMJ320C6201B — Digitaler Festkomma-Signalprozessor, Militäranwendungen SMJ320C6203 — C62x Festkomma-DSP in militärischer Qualität – Keramikgehäuse SMJ320C6415 — C64x Festkomma-DSP in militärischer Qualität – Keramikgehäuse SMJ320C6701 — C67x-Fließkomma-DSP in Militärqualität – Keramikgehäuse SMJ320C6701-SP — Weltraumtauglicher C6701-Fließkomma-DSP – strahlungstolerant, Klasse V mit Keramikgehäuse SMV320C6727B-SP — Raumfahrttauglicher C6727B Gleitkomma-DSP – strahlungstolerant, Klasse V mit Keramikgehäuse TMS320C6201 — Digitaler Festkomma-Signalprozessor TMS320C6202 — Digitaler Festkomma-Signalprozessor TMS320C6202B — C62x Festkomma-DSP – bis zu 300 MHz, 384 KB TMS320C6203B — C62x Festkomma-DSP – bis zu 300 MHz, 896 KB TMS320C6204 — Digitaler Festkomma-Signalprozessor TMS320C6205 — Digitaler Festkomma-Signalprozessor TMS320C6211B — C62x Festkomma-DSP – bis zu 167MHz TMS320C6421Q — C64x+ Festkomma-DSP – bis zu 600 MHz, 8 Bit EMIFA, 16-Bit DDR2 TMS320C6424Q — C64x+ Festkomma-DSP – bis zu 600 MHz, 16/8-Bit EMIFA, 32/16 Bit DDR2 TMS320C6452 — C64x+ Festkomma-DSP – bis zu 900 MHz, 1 Gbps-Ethernet TMS320C6454 — C64x+ Festkomma-DSP – bis zu 1 GHz, 64 Bit EMIFA, 32/16 Bit DDR2, 1 Gbps, Ethernet TMS320C6455 — C64x+ Festkomma-DSP – bis zu 1,2 GHz, 64-Bit EMIFA, 32/16 Bit DDR2, 1 Gbps-Ethernet TMS320C6457 — Digitaler Signalprozessor für die Kommunikationsinfrastruktur TMS320C6701 — C67x Fließkomma-DSP – bis zu 167MHz, McBSP TMS320C6711D — C67x-Fließkomma-DSP – bis zu 250 MHz, McBSP, 32-Bit-EMIFA TMS320C6712D — C67x Fließkomma-DSP – bis zu 150MHz, McBSP, 16-Bit EMIFA TMS320C6720 — C67x Fließkomma-DSP – 200 MHz, McASP, 16-Bit-EMIFA TMS320C6722B — C67x Fließkomma-DSP – bis zu 250 MHz, McASP, 16-Bit-EMIFA TMS320C6726B — C67x Fließkomma-DSP – bis zu 266 MHz, McASP, 16-Bit-EMIFA TMS320C6727 — C67x Fließkomma-DSP – bis zu 250MHz, McASP, 32-Bit-EMIFA TMS320C6727B — C67x Fließkomma-DSP – bis zu 350 MHz, McASP, 32-Bit-EMIFA TMS320C6743 — Energieeffizienter C674x-Fließkomma-DSP – 375 MHz TMS320C6745 — C674x Fließkomma-DSP mit geringem Stromverbrauch – 456MHz, QFP TMS320C6747 — C674x Fließkomma-DSP mit geringem Stromverbrauch – 456 MHz, PBGA
Herunterladen
Treiber oder Bibliothek

C67X-MATHLIB — DSP Math Library for C67x Floating Point Devices

The Texas Instruments math library is an optimized floating-point math function library for C programmers using TI floating point devices. These routines are typically used in computationally intensive real-time applications where optimal execution speed is critical. By using these routines instead (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
ARM-basierte Prozessoren
OMAPL137-HT — C674x Fließkomma-DSP mit geringem Stromverbrauch und Arm-Prozessor für hohe Temperaturen – bis zu 45 OMAPL138B-EP — Optimiertes Produkt energieeffizienter C674x-Fließkomma-DSP + ARM9-Prozessor – 345 MHz
Digitale Signalprozessoren (DSPs)
DM505 — SoC für Vision Analytics 15mm-Gehäuse SM320C6678-HIREL — Hochzuverlässiges Produkt mit hoher Leistung, 8-Kern-C6678 Fest- und Gleitkomma-DSP SM320C6727B — Militärtauglicher C6727B-Gleitkomma-DSP SM320C6727B-EP — Verbessertes Produkt – C6727-Fließkomma-DSP SMV320C6727B-SP — Raumfahrttauglicher C6727B Gleitkomma-DSP – strahlungstolerant, Klasse V mit Keramikgehäuse TMS320C6701 — C67x Fließkomma-DSP – bis zu 167MHz, McBSP TMS320C6711D — C67x-Fließkomma-DSP – bis zu 250 MHz, McBSP, 32-Bit-EMIFA TMS320C6712D — C67x Fließkomma-DSP – bis zu 150MHz, McBSP, 16-Bit EMIFA TMS320C6720 — C67x Fließkomma-DSP – 200 MHz, McASP, 16-Bit-EMIFA TMS320C6722B — C67x Fließkomma-DSP – bis zu 250 MHz, McASP, 16-Bit-EMIFA TMS320C6726B — C67x Fließkomma-DSP – bis zu 266 MHz, McASP, 16-Bit-EMIFA TMS320C6727 — C67x Fließkomma-DSP – bis zu 250MHz, McASP, 32-Bit-EMIFA TMS320C6727B — C67x Fließkomma-DSP – bis zu 350 MHz, McASP, 32-Bit-EMIFA TMS320C6743 — Energieeffizienter C674x-Fließkomma-DSP – 375 MHz TMS320C6745 — C674x Fließkomma-DSP mit geringem Stromverbrauch – 456MHz, QFP TMS320C6747 — C674x Fließkomma-DSP mit geringem Stromverbrauch – 456 MHz, PBGA
Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications.  Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Diese Designressource unterstützt die meisten Produkte in diesen Kategorien.

Informationen zum Support sind der Seite mit den Produktdetails zu entnehmen.
Start Download-Optionen
Software-Codec

C66XCODECSPCH — C66x Speech Codecs - Software and Documentation

TI codecs are free, come with production licensing and are available for download now. All are production-tested for easy integration into video and voice applications. In many cases, the C64x+ codecs are provided and validated for C66x platforms. Datasheets and Release Notes are on the download (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
ARM-basierte Prozessoren
OMAPL137-HT — C674x Fließkomma-DSP mit geringem Stromverbrauch und Arm-Prozessor für hohe Temperaturen – bis zu 45 OMAPL138B-EP — Optimiertes Produkt energieeffizienter C674x-Fließkomma-DSP + ARM9-Prozessor – 345 MHz SMOMAPL138B-HIREL — Hochzuverlässiges Produkt energieeffizienter C674x-Fließkomma-DSP + ARM9-Prozessor – 375 MHz
Digitale Signalprozessoren (DSPs)
DM505 — SoC für Vision Analytics 15mm-Gehäuse SM320C6678-HIREL — Hochzuverlässiges Produkt mit hoher Leistung, 8-Kern-C6678 Fest- und Gleitkomma-DSP
Download-Optionen
Software-Codec

C66XCODECSVID — C6678 Video Codecs - Software and Documentation

TI codecs are free, come with production licensing and are available for download now. All are production-tested for easy integration into video and voice applications. In many cases, the C64x+ codecs are provided and validated for C66x platforms. Datasheets and Release Notes are on the download (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
ARM-basierte Prozessoren
OMAPL137-HT — C674x Fließkomma-DSP mit geringem Stromverbrauch und Arm-Prozessor für hohe Temperaturen – bis zu 45 OMAPL138B-EP — Optimiertes Produkt energieeffizienter C674x-Fließkomma-DSP + ARM9-Prozessor – 345 MHz SMOMAPL138B-HIREL — Hochzuverlässiges Produkt energieeffizienter C674x-Fließkomma-DSP + ARM9-Prozessor – 375 MHz
Digitale Signalprozessoren (DSPs)
DM505 — SoC für Vision Analytics 15mm-Gehäuse SM320C6678-HIREL — Hochzuverlässiges Produkt mit hoher Leistung, 8-Kern-C6678 Fest- und Gleitkomma-DSP
Download-Optionen
Designtool

PROCESSORS-3P-SEARCH — Arm-basierte MPU, ARM-basierte MCU und DSP Drittanbieter-Suchtool

TI hat sich mit Unternehmen zusammengeschlossen, um eine breite Palette von Software, Tools und SOMs anzubieten, die TI-Prozessoren verwenden, damit die Produkte schneller zur Marktreife gelangen. Laden Sie dieses Suchtool herunter, um schnell unsere Drittanbieter-Lösungen zu durchsuchen und den (...)
Herunterladen
Gehäuse Pins Herunterladen
DIESALE (KGD) —
HLQFP (PTP) 176 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos