The TPD1E10B09 device is a single-channel electrostatic discharge (ESD) transient voltage suppression (TVS) diode in a small 0402 package. This ESD protection diode offers ±20 kV IEC 61000-4-2 (level 4) contact and air-gap ESD protection. The back-to-back TVS diode configuration allows for bipolar or bidirectional signal support. The 10-pF line capacitance is suitable for a wide range of applications supporting data rates up to 500 Mbps. The 0402 package is an industry standard and is convenient for component placement in space-constrained applications.
Typical applications of this ESD protection TVS diode are circuit protection for audio lines (microphone, earphone, and speaker phone), SD interfacing, keypad or other buttons, V BUS pin and ID pin of USB ports, and general-purpose I/O ports. This ESD clamp is good for the protection of end equipment like eBooks, tablets, remote controllers, wearables, set-top boxes, and electronic point of sale equipment.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | TPD1E10B09 Single-Channel ESD Protection Device in 0402 Package datasheet (Rev. E) | PDF | HTML | 14 Sep 2023 |
| User guide | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 19 Sep 2023 | |
| Selection guide | System-Level ESD Protection Guide (Rev. D) | 07 Sep 2022 | ||
| Application note | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 07 Apr 2022 | |
| User guide | Generic ESD Evaluation Module User's Guide (Rev. A) | PDF | HTML | 27 Sep 2021 | |
| White paper | Demystifying surge protection | 06 Nov 2018 | ||
| Technical article | ESD fundamentals, part 4: ESD capacitance | PDF | HTML | 12 Feb 2018 | |
| White paper | Designing USB for short-to-battery tolerance in automotive environments | 10 Feb 2016 | ||
| Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 25 Sep 2012 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
<p>The electrostatic-sensitive device (ESD) evaluation module (EVM) is a development platform for most of our ESD portfolio. The board comes with all traditional ESD footprints in order to test any number of devices. Devices can be soldered onto their respect footprint and then tested.</p>
(...)
| Gehäuse | Pins | Herunterladen |
|---|---|---|
| X1SON (DPY) | 2 | Optionen anzeigen |
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.