Solución de sistema en chip para 2,4 GHz IEEE 802.15.4 / ZigBee™
CC2430
- RF/Layout
- 2.4 GHz IEEE 802.15.4 compliant RF transceiver (industry leading CC2420 radio core)
- Excellent receiver sensitivity and robustness to interferers
- Very few external components
- Only a single crystal needed for mesh network systems
- RoHS compliant 7x7mm QLP48 package
- Low Power
- Low current consumption (RX: 27 mA, TX: 27 mA, microcontroller running at 32 MHz)
- Only 0.5 µA current consumption in powerdown mode, where external interrupts or the RTC can wake up the system
- 0.3 µA current consumption in stand-by mode, where external interrupts can wake up the system
- Very fast transition times from low-power modes to active mode enables ultra low average power consumption in low dutycycle systems
- Wide supply voltage range (2.0V - 3.6V)
- Microcontroller
- High performance and low power 8051 microcontroller core
- 32, 64 or 128 KB in-system programmable flash
- 8 KB RAM, 4 KB with data retention in all power modes
- Powerful DMA functionality
- Watchdog timer
- One IEEE 802.15.4 MAC timer, one general 16-bit timer and two 8-bit timers
- Hardware debug support
- Peripherals
- CSMA/CA hardware support.
- Digital RSSI / LQI support
- Battery monitor and temperature sensor
- 12-bit ADC with up to eight inputs and configurable resolution
- AES security coprocessor
- Two powerful USARTs with support for several serial protocols
- 21 general I/O pins, two with 20mA sink/source capability
- Development tools
- Powerful and flexible development tools available
- APPLICATIONS
- 2.4 GHz IEEE 802.15.4 systems
- ZigBee™ systems
- Home/building automation
- Industrial Control and Monitoring
- Low power wireless sensor networks
- PC peripherals
- Set-top boxes and remote controls
- Consumer Electronics
The CC2430 comes in three different flash versions: CC2430F32/64/128, with 32/64/128 KB of flash memory respectively. The CC2430 is a true System-on-Chip (SoC) solution specifically tailored for IEEE 802.15.4 and ZigBee® applications. It enables ZigBee® nodes to be built with very low total bill-ofmaterial costs. The CC2430 combines the excellent performance of the leading CC2420 RF transceiver with an industry-standard enhanced 8051 MCU, 32/64/128 KB flash memory, 8 KB RAM and many other powerful features. Combined with the industry leading ZigBee® protocol stack (Z-Stack™) from Texas Instruments, the CC2430 provides the markets most competitive ZigBee® solution.
The CC2430 is highly suited for systems where ultra low power consumption is required. This is ensured by various operating modes. Short transition times between operating modes further ensure low power consumption.
Documentación técnica
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
CC2520EMK — Kit de módulo de evaluación de CC2520
The CC2520EMK is an ad-on development kit for CC2520DK. The full stand-alone development kit is CC2520DK. The CC2520EMK development kit consists of 2 CC2520EM plug in modules and 2 antennas. The CC2520EMK is only usable together with a motherboard/host board, typically the SmartRF05EB and (...)
CC-DEBUGGER — Depurador y programador para sistema en chips RF
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
Productos y hardware compatibles
Productos
Productos de 2.4 GHz de baja potencia
MCU inalámbricas Sub-1 GHz
Transceptores Sub-1 GHz
Otros productos inalámbricos
Productos de conectividad inalámbrica automotriz
Desarrollo de hardware
Placa de evaluación
Kit de desarrollo
Software
Herramienta de programación de software
Herramienta de cálculo
Controlador o biblioteca
SWRC046 — SmartRF(TM) Studio 6.13.1
Productos y hardware compatibles
Productos
Productos de 2.4 GHz de baja potencia
MCU inalámbricas Sub-1 GHz
Transceptores Sub-1 GHz
Otros productos inalámbricos
Software
Herramienta de cálculo
SWRC063 — IEEE Address Program Software 1.0.0
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
Productos y hardware compatibles
Productos
Microcontroladores MSP430
Productos de 2.4 GHz de baja potencia
MCU inalámbricas Sub-1 GHz
Transceptores Sub-1 GHz
Otros productos inalámbricos
Productos de conectividad inalámbrica automotriz
Desarrollo de hardware
Development kit
Evaluation board
CC2430BALUN_REFDES — Diseño de referencia de CC2430 Anaren Balun
Paquete | Pasadores | Descargar |
---|---|---|
VQFNP (RTC) | 48 | Ver opciones |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.