The DS90UB914A-Q1 device offers an FPD-Link III interface with a high-speed forward channel and a bidirectional control channel for data transmission over a single coaxial cable or differential pair. The DS90UB914A-Q1 device incorporates differential signaling on both the high-speed forward channel and bidirectional control channel data paths. The deserializer is targeted for connections between imagers and video processors in an ECU (Electronic Control Unit). This device is ideally suited for driving video data requiring up to 12-bit pixel depth plus two synchronization signals along with bidirectional control channel bus.
The deserializer features a multiplexer to allow selection between two input imagers, one active at a time. The primary video transport converts 10-bit or 12-bit data to a single high-speed serial stream, along with a separate low latency bidirectional control channel transport that accepts control information from an I2C port and is independent of video blanking period.
Using TI’s embedded clock technology allows transparent full-duplex communication over a single differential pair, carrying asymmetrical-bidirectional control channel information. This single serial stream simplifies transferring a wide data bus over PCB traces and cable by eliminating the skew problems between parallel data and clock paths. This significantly saves system cost by narrowing data paths that in turn reduce PCB layers, cable width, and connector size and pins. In addition, the Deserializer inputs provide adaptive equalization to compensate for loss from the media over longer distances. Internal DC-balanced encoding/decoding is used to support AC-coupled interconnects.
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DS90UB914A-Q1 25-MHz to 100-MHz 10- and 12-Bit FPD-Link III Deserializer datasheet (Rev. D) | PDF | HTML | 2019/09/23 |
| Application note | Backwards Compatibility Modes for Operation With Parallel Output Deserializers (Rev. A) | 2018/04/17 | ||
| Application note | Migrating DS90UB914A-Q1 Designs to DS90UB934-Q1 for Automotive ADAS Systems (Rev. A) | 2018/02/05 | ||
| EVM User's guide | DS90UB913A-CXEVM and DS90UB914A-CXEVM REV A User’s Guide (Rev. B) | 2016/04/06 | ||
| Analog Design Journal | Analog Applications Journal 3Q 2015 | 2015/07/24 | ||
| Analog Design Journal | Ten tips for successfully designing with automotive EMC/EMI requirements | 2015/07/24 | ||
| Application note | Cable Requirements for the DS90UB913A and DS90UB914A | 2014/10/14 | ||
| Application note | I2C Communication over DS90UB913/4 FPD Link-III with BCC | 2013/04/22 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
The DS90UB914A_CXEVM evaluation module (EVM) helps you evaluate the operation and performance of the DS90UB914A-Q1 25-MHz to 100-MHz FPD-Link III deserializer (DES). The device translates a high-speed serialized FPD-Link III interface transported over a single 50-Ω coax cable into 10 or 12 (...)
Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:
Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| WQFN (RHS) | 48 | 옵션 보기 |
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.
ALP GUI Platform
The design resource accessed as www.ti.com/lit/zip/snlc062 or www.ti.com/lit/xx/snlc062l/snlc062l.zip has been migrated to a new user experience at www.ti.com/tool/download/SNLC062. Please update any bookmarks accordingly.