전원 관리 AC/DC & DC/DC controllers (external FET)

LM25149

활성

초저 IQ 및 통합된 활성 EMI 필터가 있는 42V 동기식 벅 DC/DC 컨트롤러

제품 상세 정보

Vin (min) (V) 3.5 Vin (max) (V) 42 Iout (max) (A) 30 Operating temperature range (°C) -40 to 150 Control mode current mode Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 36 Iq (typ) (A) 0.0000095 Duty cycle (max) (%) 99 Number of phases 2
Vin (min) (V) 3.5 Vin (max) (V) 42 Iout (max) (A) 30 Operating temperature range (°C) -40 to 150 Control mode current mode Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 36 Iq (typ) (A) 0.0000095 Duty cycle (max) (%) 99 Number of phases 2
VQFN (RGY) 24 19.25 mm² 5.5 x 3.5
  • Functional Safety-Capable
  • Two integrated EMI mitigation mechanisms
    • Active EMI Filter for enhanced EMI performance at lower frequencies
    • Selectable dual random spread spectrum (DRSS) for enhanced EMI performance across low and high-frequency bands
    • EMI reduced by an average of 25 dBµV
    • Reduces the external differential-mode input filter size by 50% and lowers systems cost
    • Optimized for CISPR 32 Class B requirements
  • Versatile synchronous buck DC/DC controller
    • Wide input voltage range of 3.5 V to 42 V
    • 1% accurate, fixed 3.3-V, 5-V, 12-V, or adjustable output from 0.8 V to 36 V
    • 150°C maximum junction temperature
    • Shutdown mode current: 2.3 µA
    • No-load sleep current: 9.5 µA
    • Stackable up to two phases
    • Advanced dropout with frequency foldback
  • Switching frequency from 100 kHz to 2.2 MHz
    • SYNC in and SYNC out capability
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • ENABLE and PGOOD functions
    • VCC, VDDA, and gate-drive UVLO protection
    • Internal or external loop compensation
    • Thermal shutdown protection with hysteresis
  • Create a custom design using the LM25149 with WEBENCH Power Designer
  • Functional Safety-Capable
  • Two integrated EMI mitigation mechanisms
    • Active EMI Filter for enhanced EMI performance at lower frequencies
    • Selectable dual random spread spectrum (DRSS) for enhanced EMI performance across low and high-frequency bands
    • EMI reduced by an average of 25 dBµV
    • Reduces the external differential-mode input filter size by 50% and lowers systems cost
    • Optimized for CISPR 32 Class B requirements
  • Versatile synchronous buck DC/DC controller
    • Wide input voltage range of 3.5 V to 42 V
    • 1% accurate, fixed 3.3-V, 5-V, 12-V, or adjustable output from 0.8 V to 36 V
    • 150°C maximum junction temperature
    • Shutdown mode current: 2.3 µA
    • No-load sleep current: 9.5 µA
    • Stackable up to two phases
    • Advanced dropout with frequency foldback
  • Switching frequency from 100 kHz to 2.2 MHz
    • SYNC in and SYNC out capability
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • ENABLE and PGOOD functions
    • VCC, VDDA, and gate-drive UVLO protection
    • Internal or external loop compensation
    • Thermal shutdown protection with hysteresis
  • Create a custom design using the LM25149 with WEBENCH Power Designer

The LM25149 is a 42-V, ultra-low IQ synchronous buck DC/DC controller for high-current, single-output applications. The controller uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The LM25149 can be set up in interleaved dual-phase mode with accurate current sharing for high-current applications. It can operate with VIN as low as 3.5 V, at nearly 100% duty cycle if needed.

The LM25149 has two unique EMI reduction features: active EMI filter and dual random spread spectrum (DRSS). The active EMI filter senses any noise or ripple voltage on the DC input bus and injects an out-of-phase cancellation signal to reduce the disturbance. DRSS combines low-frequency triangular and high-frequency randomized modulations to mitigate EMI across lower and higher frequency bands, respectively. This hybrid technique aligns with the multiple resolution bandwidth (RBW) settings specified in industry-standard EMC tests.

Additional features of the LM25149 include 150°C maximum junction temperature operation, user-selectable diode emulation for lower current consumption at light-load conditions, open-drain power-good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator and bootstrap diode, internal 3-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM25149 controller comes in a 3.5-mm × 5.5-mm thermally enhanced, 24-pin VQFN package with an exposed pad to aid in thermal dissapation.

The LM25149 is a 42-V, ultra-low IQ synchronous buck DC/DC controller for high-current, single-output applications. The controller uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The LM25149 can be set up in interleaved dual-phase mode with accurate current sharing for high-current applications. It can operate with VIN as low as 3.5 V, at nearly 100% duty cycle if needed.

The LM25149 has two unique EMI reduction features: active EMI filter and dual random spread spectrum (DRSS). The active EMI filter senses any noise or ripple voltage on the DC input bus and injects an out-of-phase cancellation signal to reduce the disturbance. DRSS combines low-frequency triangular and high-frequency randomized modulations to mitigate EMI across lower and higher frequency bands, respectively. This hybrid technique aligns with the multiple resolution bandwidth (RBW) settings specified in industry-standard EMC tests.

Additional features of the LM25149 include 150°C maximum junction temperature operation, user-selectable diode emulation for lower current consumption at light-load conditions, open-drain power-good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator and bootstrap diode, internal 3-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM25149 controller comes in a 3.5-mm × 5.5-mm thermally enhanced, 24-pin VQFN package with an exposed pad to aid in thermal dissapation.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
LM25149-Q1 활성 42V 차량용 동기식 벅 DC/DC 컨트롤러, 초저 IQ 및 통합 액티브 EMI 필터 지원 42-VIN AEC-Q100-grade P2P option

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기6
유형 직함 날짜
* Data sheet LM25149 42-V Synchronous Buck DC/DC Controller with Ultra-Low IQ and Integrated Active EMI Filter datasheet (Rev. B) PDF | HTML 2021/12/15
Application note How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck PDF | HTML 2023/08/16
User guide LM25149-Q1 EVM User's Guide (Rev. A) PDF | HTML 2022/04/29
Functional safety information LM25149 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021/12/07
E-book An Engineer’s Guide to Low EMI in DC/DC Regulators 2021/04/21
Technical article How to reduce EMI and shrink power-supply size with an integrated active EMI filte PDF | HTML 2021/04/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM25149-Q1EVM-2100 — LM25149-Q1 5.5V~36V 저 IQ, 동기 벅 DC/DC 컨트롤러 평가 모듈

LM25149-Q1EVM-2100 고밀도 평가 모듈(EVM)은 LM25149-Q1 고성능 차량용 동기 벅 DC/DC 벅 컨트롤러의 성능을 보여주도록 설계되었습니다. EVM은 5.5 V~36V의 넓은 입력 전압 범위에서 작동하여 1% 이상의 설정값 정확도와 최대 8A 출력 전류를 가진 고정 5V 출력을 제공합니다. LM25149-Q1은 고급 EMI 성능과 초저 IQ를 제공합니다. 고장 상태에서의 레귤레이터 기능에는 저전압 잠금, 내부 소프트 시작, 히컵 모드 과전류 보호 및 열 셧다운이 포함됩니다. 오픈 드레인 PGOOD 표시기 및 (...)
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
평가 보드

LM5149-Q1EVM-400 — LM5149-Q1 평가 모듈, 72V, 저 IQ, 동기 벅 DC/DC 컨트롤러, 능동 EMI 필터 포함

LM5149-Q1EVM-400 고밀도 평가 모듈(EVM)은 LM5149-Q1 고성능 차량용 동기 벅 DC/DC 벅 컨트롤러의 성능을 보여주도록 설계되었습니다. EVM은 15 V~72V의 넓은 입력 전압 범위에서 작동하여 1% 이상의 설정값 정확도와 최대 8A 출력 전류를 가진 고정 12V 출력을 제공합니다. LM5149-Q1은 고급 EMI 성능, 초저 IQ, 고장 상태 중 레귤레이터 보호를 지원하는 보호 기능을 제공합니다. 여기에는 부족 전압 잠금, 내부 소프트 시작, 히컵 모드 과전류 보호 및 열 셧다운 등이 포함됩니다. 또한 (...)

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

LM25149-Q1 PSpice Transient Model

SNVMC96.ZIP (308 KB) - PSpice Model
계산 툴

LM5149-LM25149DESIGN-CALC LM25149 Design Calculation Tool

Welcome to the quickstart design tool for the LM5149, LM5149-Q1 and LM25149, LM25149-Q1. This standalone tool facilitates and assists the power supply engineer with the design of a DC/DC buck regulator based on the above controller family. As such, the user can expeditiously arrive at an optimized (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC & DC/DC controllers (external FET)
LM25149 초저 IQ 및 통합된 활성 EMI 필터가 있는 42V 동기식 벅 DC/DC 컨트롤러 LM25149-Q1 42V 차량용 동기식 벅 DC/DC 컨트롤러, 초저 IQ 및 통합 액티브 EMI 필터 지원 LM5149 초저 IQ 및 통합된 활성 EMI 필터가 있는 80V 동기식 벅 DC/DC 컨트롤러 LM5149-Q1 80V 차량용 동기식 벅 DC/DC 컨트롤러, 초저 IQ 및 통합 액티브 EMI 필터 지원
하드웨어 개발
평가 보드
LM25149-Q1EVM-2100 LM25149-Q1 5.5V~36V 저 IQ, 동기 벅 DC/DC 컨트롤러 평가 모듈
PCB 레이아웃

LM25149-Q1EVM-2100 PCB Layout Files

SNVR501.ZIP (1990 KB)
패키지 다운로드
VQFN (RGY) 24 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상