LM3633
- Drives Three Parallel High-Voltage LED Strings
for Display and Keypad Lighting - High-Voltage Strings Capable of up to 40-V
Output Voltage and up to 90% Efficiency - Up to 30-mA per Current Sink
(Both Backlight and Indicator) - 11-Bit High-Voltage LED Dimming
- PWM Input for Content Adjustable Brightness
Control (CABC) - Integrated 1-A/40-V MOSFET
- Adaptive Boost Output to LED Voltages
- Six Low-Voltage Current Sinks for Indicator LEDs
- Integrated Charge Pump for Improved Efficiency
and VIN Operating Range - Internal Pattern Generation Engine for Each
Indicator LED - Fully Configurable LED Grouping and Control
- Four Programmable Overvoltage Protection
Thresholds (16 V, 24 V, 32 V, and 40 V) - Programmable 500-kHz and 1-MHz
Switching Frequency - Overcurrent Protection
- Thermal Shutdown Protection
- 27 mm2 Total Solution Size
The LM3633 11-bit LED driver provides high-performance backlight dimming for 1, 2, or 3 parallel high-voltage LED strings while delivering up to 90% efficiency. The boost converter with integrated 1-A, 40-V MOSFET automatically adjusts to LED forward voltage to minimize headroom voltage and effectively improve LED efficiency.
The LM3633 is a complete power source for backlight, keypad, and indicator LEDs in smartphone handsets. The high-voltage inductive boost converter provides the power for three parallel LED strings (HVLED1, HVLED2 and HVLED3). The integrated charge pump provides the bias for the six low-voltage indicator LEDs (LVLED1-LVLED6). All low-voltage current sinks can have a programmable pattern modulated onto their output current for a wide variety of blinking patterns.
An additional feature is a Pulse Width Modulation (PWM) control input for content adjustable backlight control, which can be used to control any high-voltage current sink.
The LM3633 is fully programmable via an I2C-compatible interface. The device operates over a 2.7-V to 5.5-V input voltage range and a −40°C to 85°C temperature range.
For all available packages, see the orderable addendum at the end of the datasheet.기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM3633 Complete Lighting Power Solution for Smartphone Handsets datasheet | PDF | HTML | 2014/06/04 |
| White paper | Common LED Functions and LED Driver Design Considerations | 2020/09/21 | ||
| Application note | Analog PWM Dimming in White-LED Drivers | 2016/12/21 | ||
| Application note | Inductor Selection in Boost Converters for LCD Backlight Applications | 2016/10/24 | ||
| Application note | Schottky Diode Selection in Asynchronous Boost Converters | 2016/09/06 | ||
| EVM User's guide | LM3633 User's Guide | 2014/06/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM3633SW-LINUX — LM3633용 Linux 드라이버
Linux Mainline Status
Available in Linux Main line: No
Available through git.ti.com: (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| DSBGA (YFQ) | 20 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.