LM70880-Q1
- AEC-Q100 qualified for automotive applications:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Synchronous DC/DC converter with a versatile buck controller and robust power MOSFETs
- Wide input voltage range: 4.5 V to 80 V
- 1% accurate, fixed 3.3 V, 5 V, 12 V, or adjustable outputs from 0.8 V to 55 V
- Dual-phase control enables paralleling two devices for higher current applications
- Shutdown mode current: 2.3 µA
- No-load sleep current: 6.5 µA
- Optimized for low EMI requirements
- Facilitates CISPR 25 Class 5 compliance
- Pin-selectable ±8% dual-random spread spectrum reduces peak emissions
- Switching frequency: 200 kHz to 2.2 MHz
- Pin-configurable AUTO or FPWM operation
- Inherent protection features for robust design
- Internal hiccup-mode overcurrent protection
- Enable, power-good, and thermal shutdown
- Internal or external loop compensation
- 6-mm × 6-mm thermally optimized, RoHS compliant, QFN-29 package with Pb-Free plating
The LM70880-Q1 is a compact, easy-to-use, 4.5-V to 80-V, ultra-low I Q, synchronous step-down DC/DC converter featuring a versatile buck controller and a pair of power MOSFETs designed for delivering of up to 8 A of output current at fixed output voltages of 3.3 V, 5 V, 12 V, or an adjustable output.
The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. A pair of LM70880-Q1 converters can be set up in an interleaved mode (paralleled outputs) with accurate current sharing for applications requiring up to 16 A of output current.
The LM70880-Q1 features a unique Dual Random Spread Spectrum (DRSS) function that combines a low-frequency triangular modulation with a high-frequency cycle-by-cycle random modulation for improved EMI performance across a high range of radio frequency bands.
Additional features of the LM70880-Q1 include user-selectable diode emulation for lower current consumption at light-load conditions, open-drain Power-Good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 2.75-ms soft-start time, and thermal shutdown protection with automatic recovery.
The LM70880-Q1 converter comes in a 6-mm × 6-mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).
자세한 정보 요청
전체 데이터 시트 및 추가 문서를 사용할 수 있습니다. 지금 요청
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LM708x0-Q1 80-V, 8-A/6-A/4-A, Automotive, High-Efficiency Buck Converters Optimized for High Power Density datasheet | PDF | HTML | 2023/09/06 |
EVM User's guide | LM70880-Q1 Buck Converter Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2024/03/06 | |
Certificate | LM70880QEVM EU Declaration of Conformity (DoC) | 2023/07/20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM70880QEVM — LM70880-Q1 평가 모듈
PMP31291 — 27-W Inverting Buck-boost Reference Design
패키지 | 핀 | 다운로드 |
---|---|---|
VQFN (RRX) | 29 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치