전원 관리 PoE(Power Over Ethernet) 솔루션 전력원 장비

TPS23880

활성

프로그래머블 SRAM을 지원하는 4페어, 타입 4, 8채널 PoE PSE

제품 상세 정보

Vin (min) (V) 44 Vin (max) (V) 57 ILIM Programmable PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 FET External MPS method DC Disconnect Pair control 2-Pair Alt A, 4-Pair Operating temperature range (°C) -40 to 125 Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Rating Catalog
Vin (min) (V) 44 Vin (max) (V) 57 ILIM Programmable PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 FET External MPS method DC Disconnect Pair control 2-Pair Alt A, 4-Pair Operating temperature range (°C) -40 to 125 Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Rating Catalog
VQFN (RTQ) 56 64 mm² 8 x 8
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power Over Ethernet applications
  • Eight independent PSE channels
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±3%
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Inherent filtering
    • Noise immune MPS for DC disconnect
    • 2% Current sensing accuracy
    • 100-ms Rolling port current averaging
  • 1- or 3-Bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Never Fooled 4-Point detection
  • Inrush and operational foldback protection
  • 425-mA and 1.25-A Selectable current limits
  • Port re-mapping
  • 8-Bit or 16-bit I2C communication
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per Port voltage monitoring and telemetry
  • –40°C to +125°C Temperature operation
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power Over Ethernet applications
  • Eight independent PSE channels
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±3%
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Inherent filtering
    • Noise immune MPS for DC disconnect
    • 2% Current sensing accuracy
    • 100-ms Rolling port current averaging
  • 1- or 3-Bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Never Fooled 4-Point detection
  • Inrush and operational foldback protection
  • 425-mA and 1.25-A Selectable current limits
  • Port re-mapping
  • 8-Bit or 16-bit I2C communication
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per Port voltage monitoring and telemetry
  • –40°C to +125°C Temperature operation

The TPS23880 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

Programmable SRAM enables in-field firmware upgradability over I2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±3% accurate programmable port power limit provides the ability to expand the maximum power sourced above 90 W without exceeding 100 W while also making system level power management control more easy to implement and reliable. The Fast Shutdown (OSS) input provides up to eight levels of per port shutdown priority for applications requiring immediate disabling of multiple ports. The 255-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

Port remapping and pin-to-pin compatibility with the TPS2388, TPS23881, and TPS23882 devices eases migration from previous generation PSE designs and enables interchangeable 2-layer PCB designs to accommodate different system PoE power configurations.

The TPS23880 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

Programmable SRAM enables in-field firmware upgradability over I2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±3% accurate programmable port power limit provides the ability to expand the maximum power sourced above 90 W without exceeding 100 W while also making system level power management control more easy to implement and reliable. The Fast Shutdown (OSS) input provides up to eight levels of per port shutdown priority for applications requiring immediate disabling of multiple ports. The 255-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

Port remapping and pin-to-pin compatibility with the TPS2388, TPS23881, and TPS23882 devices eases migration from previous generation PSE designs and enables interchangeable 2-layer PCB designs to accommodate different system PoE power configurations.

다운로드 스크립트와 함께 비디오 보기 동영상

자세한 정보

TPS23880 제품 공지 및 최신 펌웨어 업데이트가  있습니다. 지금 요청

Rsense 감소(200mΩ)와 자율 모드 작동을 위해서는  TPS23881을 만나보세요

2페어, 타입 3 30W 오퍼레이션을 위해서는  TPS23882를 만나보세요

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기9
유형 직함 날짜
* Data sheet TPS23880 Type-4 4-Pair 8-Channel PoE 2 PSE Controller with Programmable SRAM datasheet (Rev. G) PDF | HTML 2020/08/14
Application brief How to Load TPS2388x SRAM and Parity Code Over I2C (Rev. E) PDF | HTML 2023/04/20
Test report TPS23880 PoE2 Test Report 2020/05/26
Design guide 24-Port (4 Pair) Power Sourcing Equipment Reference Design for Multi-port Applic (Rev. A) 2019/10/15
EVM User's guide TPS23880EVM: PoE, PSE, TPS23880 Evaluation Module (Rev. B) 2018/10/17
Technical article Key considerations for designing with the new PoE standard PDF | HTML 2018/07/16
Technical article The new PoE standard: It’s almost here PDF | HTML 2018/06/06
Application note Beyond BT High-Power PoE Solution using the TPS23880 and TPS2372-4 2018/04/17
Application note TPS23861 Power-On Considerations 2015/07/21

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

도터 카드

TPS23880EVM-008 — IEEE 802.3bt 지원 PoE PSE 애플리케이션용 TPS23880 EVM 도터 카드

TPS23880EVM-008 is the daughter card to evaluate the TPS23880 which is a 4-pair, type-4, 8-channel Power-over-Ethernet (PoE) PSE with programmable SRAM. This daughter card provides evaluation and reference circuitry for the TPS23880 which is suitable for high power PSE applications such as campus (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
개발 키트

BOOST-PSEMTHR-007 — IEEE 802.3bt 지원 PoE PSE 애플리케이션을 위한 TPS2388x 마더보드

BOOST-PSEMTHR-007 is the base board for the TPS23880 and TPS23881 PSE controllers. This board contains four 2-pair ports that can be used to send up to 30W/port for IEEE 802.3at applications and two 4-pair ports that can be used to send up to 90W/port for IEEE 802.3bt applications.

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
코드 예제 또는 데모

SLVC709 TPS23880 PoE MSP430 Reference Code for Basic Applications

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
전력원 장비
TPS23880 프로그래머블 SRAM을 지원하는 4페어, 타입 4, 8채널 PoE PSE
하드웨어 개발
도터 카드
TPS23880EVM-008 IEEE 802.3bt 지원 PoE PSE 애플리케이션용 TPS23880 EVM 도터 카드
개발 키트
BOOST-PSEMTHR-007 IEEE 802.3bt 지원 PoE PSE 애플리케이션을 위한 TPS2388x 마더보드
코드 예제 또는 데모

SLVC720 TPS23880 PoE MSP430 Reference Code for Port Power Management Applications

lock = 수출 승인 필요(1분)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
전력원 장비
TPS23880 프로그래머블 SRAM을 지원하는 4페어, 타입 4, 8채널 PoE PSE
하드웨어 개발
도터 카드
TPS23880EVM-008 IEEE 802.3bt 지원 PoE PSE 애플리케이션용 TPS23880 EVM 도터 카드
개발 키트
BOOST-PSEMTHR-007 IEEE 802.3bt 지원 PoE PSE 애플리케이션을 위한 TPS2388x 마더보드
평가 모듈(EVM)용 GUI

SLVC772 TPS2388x EVM GUI

lock = 수출 승인 필요(1분)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
전력원 장비
TPS23880 프로그래머블 SRAM을 지원하는 4페어, 타입 4, 8채널 PoE PSE TPS23881 200mΩ RSENSE를 지원하는 4페어, 타입 4, 8채널 PoE PSE  TPS23882 SRAM 및 200mΩ RSENSE를 지원하는 타입 3, 2페어, 8채널 PoE PSE 컨트롤러 TPS23882B 자동 모드, SRAM 및 200mΩ RSENSE를 지원하는 타입 3, 2페어, 8채널 PoE PSE 컨트롤러
하드웨어 개발
평가 보드
BOOST-PSEMTHR8-097 8포트 PSE 시스템용 TPS23882 Type-3, 30W, 2페어 PSE 마더보드
도터 카드
TPS23880EVM-008 IEEE 802.3bt 지원 PoE PSE 애플리케이션용 TPS23880 EVM 도터 카드 TPS23881EVM-008 IEEE 802.3bt 지원 PoE PSE 애플리케이션을 위한 TPS23881 도터 카드 TPS23882B1EVM-008 TPS23882B 부속 카드 유형-3, 30W, 2페어, 8포트 시스템 PSE TPS23882EVM-008 8포트 PSE 시스템을 위한 TPS23882 Type-3, 30W, 2페어, PSE 도터 카드
개발 키트
BOOST-PSEMTHR-007 IEEE 802.3bt 지원 PoE PSE 애플리케이션을 위한 TPS2388x 마더보드
거버(Gerber) 파일

TPS23880EVM-008 Gerber

SLUC647.ZIP (1643 KB)
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
VQFN (RTQ) 56 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상