TPS53676
- Input voltage range: 4.5 V to 17 V
- Output voltage range: 0.25 V to 5.5 V
- Per-phase switching frequency range: 300 kHz to 2000 kHz
- Dual output supporting N+M phase configurations (N+M ≤ 7, M ≤ 3)
- AVSBus compliant, per PMBus 1.3.1 part III
- PMBus v1.3.1 system interface for configuration, control and telemetry of voltage, current, power, temperature, and fault status
- Adaptive voltage scaling (AVS) through VOUT_COMMAND
- Enhanced D-CAP+ control to provide super transient performance with excellent dynamic current sharing
- Programmable loop compensation
- Flexible phase-firing order
- External pinstrap for Ch. A boot voltage settings
- Individual phase current calibrations and reporting
- Phase thermal balance management (TBM)
- Full support for dynamic phase shedding (DPS)
- Fast phase-adding for undershoot reduction (USR)
- Body-diode braking for overshoot reduction (OSR)
- Driverless configuration for efficient high-frequency switching
- Fully Compatible with TI NexFET™ power stage for high-density solutions
- Accurate, programmable adaptive voltage positioning (AVP)
- Patented AutoBalance™ phase balancing
- 6 mm × 6 mm, 48-pin, QFN package
The TPS53676 is a step-down controller with dual channels, built-in non-volatile memory (NVM), and PMBus™ compatible serial interface, and is fully compatible with TI NexFET™ smart power stage. Advanced control features such as D-CAP+™ architecture provide fast transient response, low output capacitance, and good current sharing. The device also provides novel phase interleaving strategy and flexible firing sequences to improve thermal performance. Adjustable control of output voltage slew rate and voltage positioning are also supported. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the system host. All programmable parameters can be configured by the serial interface and can be stored in NVM as the new default values to minimize the external component count.
The TPS53676 device if offered in a thermally enhanced 48-pin QFN packaged and is rated to operate from –40°C to 125°C.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPS53676 Dual-Channel D-CAP+™, (N+M ≤ 7 Phases) Step-Down, Multiphase Controller with AVSBus and PMBus Interfaces datasheet (Rev. A) | PDF | HTML | 2021/01/13 |
EVM User's guide | Using the TPS53676 step-down controller EVM | PDF | HTML | 2021/03/23 | |
User guide | TPS536C7 TRM | 2021/01/04 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS53676EVM-084 — TPS53676 7상 AVSBus 컨트롤러 평가 모듈
사용자는 TPS53676EVM 평가 모듈(EVM)을 통해 TPS53676 컨트롤러를 평가할 수 있습니다.
컨트롤러는 PMBus 인터페이스를 지원하는 듀얼 채널(6+0, 6+1 또는 5+2 위상), D-CAP+ 동기 벅 드라이버리스 제어입니다. 이 디바이스는 4.5V~17V 사이의 전압 공급을 사용하여 작동합니다. 이 컨트롤러는 PMBus 인터페이스를 통해 프로그래밍 및 모니터링을 지원합니다.
이 BMC084-EVM은 CSD95410, 동기 벅 NexFET™ 스마트 전력계 장치를 전력계로 사용합니다.
FUSION_DIGITAL_POWER_DESIGNER — 디지털 전원 소프트웨어
패키지 | 핀 | 다운로드 |
---|---|---|
VQFN (RSL) | 48 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치